Arsenidostannate mit Arsen-analogen [SnAs]-Schichten: Darstellung und Struktur von Na[Sn2As2], Na0,3Ca0,7[Sn2As2], Na0,6Sr0,6[Sn2As2], Na0,6Ba0,4[Sn2As2] und K0,3Sr0,7[Sn2As2]

Arsenidostannates with [SnAs] Nets Isostructural to Grey Arsenic: Synthesis and Crystal Structure of Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂], and K_0.3Sr_0.7[Sn₂As₂] The metallic lustrous compounds Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂] and K_0.3Sr_0.7[Sn₂As₂] were prepared from melts of mixtures of the elements. The compounds crystallize in the trigonal system (space group R3 m, No. 166, Z = 3) with lattice constants see in “Inhaltsübersicht”. The structures are isotypic to Sr[Sn₂As₂] containing puckered [SnAs] nets which are stacked with a sequence of six layers. The E(I)/E(II) atoms are located between each second [SnAs] layer in trigonal antiprismatic interstices formed by As atoms. In the resulting [Sn₂As₂] double layers the _∞²[SnAs] nets are stacked in such a way that additional Sn—Sn contacts arise.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.     

碱土金属掺杂纳米TiO2催化剂的制备与光催化活性的评价

The nanometer TiO₂ were prepared by the hydrolyze-gel method and fellowed by doping alkaline-earth metals (Mg, Ca, Sr, Ba). XRD, SEM, diffuse reflection spectra were used to investigate their characteristices. The result indicates that the average particles size of the TiO₂ is about 80 nm and keep uniformity in distributing. The product was mainly anatase in 300～400 ℃ calcinations, the einstein shift of absorption spectrum was observed after doping the alkaline-earth metals. The best mole percentages of Mg, Ca, Sr and Ba are 0.5%, 1.0%, 1.5%, 1.5% respectively. Under the same reaction conditions, it is more effective to the UV-catalyed degradation reaction that the catalysts containing Mg and Ca were calcined at 300 ℃ for 1h or containing Sr and Ba were calcined at 400 ℃ for 1 h. The photocatalystic activity is considerably depondent on pH and the concentration of the oxidant. Using the sunlight to do the degradation experimental, the result also show that the doping catalysts has higher degradation efficiency than that of pure TiO₂.     

Reaction of benzothiazol-2-one with 4-hydroxy-4-methyl-2-pentynonitrile

Reaction between the title compounds gave the unexpected 3-[5,5-dimethyl-2,5-dihydrofur-4-yl-2-(3-isopropanol-2-propenonitrile)imino]benzothiazol-2-one, as a result of the addition of two cyanoacetylene molecules.Irkutsk Institute of Organic Chemistry, Siberian Branch, Russian Academy of Sciences, Irkutsk 664033. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 1003–1005, April, 1992.     

Thioureas from 3-aminoquinazolin-4(3H)-one. 2. Unusual alkaline recyclization of 3-(N",N",S-trialkylisothioureido)quinazolin-4(3H)-ones into new 1,3,4-oxadiazoles

3-(N",N",S-trialkylisothioureido)quinazolin-4(3H)-ones obtained by the reactions of 3-(N",N"-dialkylthioureido)quinazolin-4(3H)-ones with alkyl halides undergo unusual recyclization into 5-(2-aminophenyl)-2-dialkylamino-1,3,4-oxadiazoles under the action of aqueous solutions of alkali, hydrazine, and primary aliphatic amines. A plausible mechanism of the recyclization was proposed.     

Study of the Influence of Alkaline Ions (Li, Na and K) on the Structure of the Silicate Entities in Silico Alkaline Sol and on the Formation of the Silico-Calco-Alkaline Gel

The study of silico-calco-alkaline gel is essential to warn against the degradation of concrete due to the alkali-silica reaction. In the laboratory, those gels are simulated by the destabilization of a silico-alkaline sol by calcium ions. Their speed of formation depends on the alkali species. The influence of alkaline ions (Li, Na and K) on the structure of silicate entities in sol and on the gel formation has been studied. The state of polymerization of the silico-alkaline sol was determined by NMR and depends on the alkali species and the molar ratio (Rm = [SiO2]/[A2O] with A = Li, Na or K). It appears that lithium enhances the polymerization. By scattering techniques (SAXS and ELS), the evolution of size and number of scattering particles during gelation can be determined from scattering curves with Guinier approximation. The mechanism of gelation appears as a hierarchic structure composed of several discrete sizes.     

Low volume microwave digestion for the determination of selenium in marine biological tissues by graphite furnace atomic absorption spectroscopy

A microwave digestion method for the determination of marine biological tissues has been developed to allow determination of selenium in small sample sizes (< 0.1 g). The benefits of this technique include maintaining concentrates in extracts without the subsequent over dilution encountered when using larger vessels, increased sample throughput and reduced loss of volatile material. Freeze dried biological material (< 0.1 g) and nitric acid (1 ml) were placed into 7 ml screw top Teflon vessels which are completely sealed on capping. Two 7 ml vials were placed into larger 120 ml vessels fitted with a Teflon spacer and 10 ml of distilled water. The effects of microwave power and time, and sample mass on selenium recovery from three marine standard reference materials (NIST SRM 1566a Oyster Tissue, NRCC DORM-1 Dogfish Muscle and NRCC TORT-1 Lobster Hepatopancreas) were examined. The optimum conditions: 600 W, 2 min; 0 W, 2 min; 450 W, 45 min, allowed quantitative recoveries of selenium from these and three other standard reference materials (NRCC DOLT-1 Dogfish liver, NIST RM-50 Albacore tuna and IAEA MA-A-2 fish flesh). Studies on sample mass showed that the analysis of sample masses from 0.025 to 0.1 g gave selenium concentrations within the certified range. Six species of selenium: selenite, selenate, selenomethionine, selenocysteine, selenocystamine, and trimethyl selenonium were added to oyster, dogfish, and lobster tissues. Recoveries were near quantitative for all species (94–105%) except trimethyl selenonium (90–101%).     

Isolation of selenium organic species from antarctic krill after enzymatic hydrolysis

Total selenium content and its distribution in the soluble and insoluble protein-bound fractions obtained after aqueous extraction of antarctic krill samples were determined. About 26% of the total selenium (2.4 g g^–1 dry weight) was found in the supernatant; the rest was in the pellet. Isolation of low molecular selenium-containing fractions was also performed by enzymatic digestion of the protein, followed by size-exclusion chromatography in conjunction with atomic absorption spectrometry. From the applied various proteinases (pronase E, subtilisin Carlsberg, trypsin, chymotrypsin, proteinase and proteinase N from Bacillus subtilis and Novo 0.6 MPX enzyme), the treatment with pronase E led to best recovery of selenium. About 96% of the total Se was found in the hydrolysate, mainly in low molecular weight fractions. Eighty percent of the Se species were in fractions with molecular weights in the range of amino acids and short peptides. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC-ICP-MS) allowed the identification of selenomethionine and the assumption that selenocystine or its derivatives were the main species in these fractions.     

Production and energetic use of biogas from energy crops and wastes in Germany

The production of biogas for reducing fossil CO₂ emissions is one of the key strategic issues of the German government and has resulted in the development of new process techniques and new technologies for the energetic use of biogas. Progress has been made in cultivating energy crops for biogas production, in using new reactor systems for anaerobic digestion, and in applying more efficient technologies for combined heat and power production. Recently, integration of fuel cells within the anaerobic digestion process was started, and new technologies for biogas upgrading and conversion to hydrogen were tested. This article describes the trends in Germany for achieving more efficient energy production.     

Double bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene to 5-ethylidenebicyclo[2.2.1]hept-2-ene over alkaline earth oxides

All the alkaline earth oxides exhibit activities for double, bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene (VBH) to 5-ethylidenebicyclo[2.2.1]hept-2-ene (EBH) at a reaction temperature of 273 K. The order of the activity on the basis of unit weight of catalyst was CaO>MgO>SrO>BaO when compared under optimum pretreatment conditions. The E/Z ratio in the products is determined by the reaction temperature regardless of the type of catalyst; the ratios were 82/18 and 88/12 for the reaction temperatures of 323 and 273 K, respectively.