Mo掺杂NiMnSe2的制备及其超级电容器性能

成分和结构是影响多元过渡金属硒化物电化学活性的关键因素。适当掺杂其他金属元素可以有效提高电极材料的电化学性能。通过简单的一步水热法,在泡沫镍上制备出了一种无黏结剂的Mo掺杂NiMnSe₂(记作Ni_0.8Mo_0.2MnSe₂)。Mo的少量掺杂为电极材料提供了丰富的反应活性位点,大大提高了NiMnSe₂的电化学性能。在1 A·g^-1时,Ni_0.8Mo_0.2MnSe₂的比容量达到1 404.0 F·g^-1。掺杂Mo显著降低了NiMnSe₂的电荷转移电阻和扩散电阻。组装的混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC (活性炭)比容量达到81.6 F·g^-1,且倍率性能优异。在2 A·g^-1下连续充放电10 000周,容量保持率为95.8%,表现出超高的循环稳定性。混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC在376.6 W·kg^-1的功率密度下,能量密度达25.5 Wh·kg^-1,高于NiMnSe₂//AC (17.3 Wh·kg^-1)。     

便携式X射线荧光光谱仪在污染场地中重金属检测的应用

为探究便携式X射线荧光光谱法(Portable X-ray fluorescence spectrometry method, PXRF)测定结果的不确定度, 应用PXRF法和传统实验室方法对湖南某典型有色金属污染场地及周边土壤中的重金属进行测定,通过建立线性回归模型对比分析两种方法的测定数据,探究了PXRF法测定数据的准确程度和置信区间。结果表明,PXRF法原位、异位测定值与传统实验室方法测定值均能呈现较好的线性相关性,As、Cu、Pb、Cd等元素的决定性系数(R2)均大于0.70,其检测数据质量均能达到定量水平;PXRF法与实验室方法测定值间比率的置信区间结果显示,Cd元素的准确性最好,其次为Pb、Cu、As,比率置信区间分别为(0.57, 1.89)、(0.38, 2.22)、(0.31, 2.25)、(0.20, 4.53)。由此可见,PXRF法是一种方便快捷且相对准确的土壤重金属现场检测方法,可广泛地应用于污染场地调查和土壤修复工程实践中。     

Alkali metal cation doping of metal-organic framework for enhancing carbon dioxide adsorption capacity

Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was chemically reduced by doping it with alkali metals （Li, Na and K） and they were further used to investigate their CO2 adsorption capacities. The structural information, surface chemistry and thermal behavior of the prepared adsorbent samples were characterized by X-ray powder diffraction （XRD）, thermo-gravimetric analysis （TGA） and nitrogen adsorption-desorption isotherm analysis. The results showed that the CO2 storage capacity of HKUST-1 doped with moderate quantities of Li＋, Na＋ and K＋, individually, was greater than that of unmodified HKUST-1. The highest CO2 adsorption uptake of 8.64 mmol/g was obtained with 1K-HKUST-1, and it was ca. 11% increase in adsorption capacity at 298 K and 18 bar as compared with HKUST- 1. Moreover, adsorption tests showed that HKUST-1 and 1K-HKUST-1 displayed much higher adsorption capacities of CO2 than those of N2. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of 1K-HKUST-1 was fairly stable, without obvious deterioration in the adsorption capacity of CO2 after 10 cycles.     

二维TiC层表面H2的化学吸附与物理吸附

第一性原理计算研究发现由于二维TiC单原子层具有高的比表面积与大量的暴露在表面的Ti原子,其是一种非常有潜力的储氢材料.计算结果显示H2可以在二维TiC单原子层表面进行物理吸附与化学吸附.其中化学吸附能为每个氢分子0.36 eV,物理吸附能是每个氢分子0.09 eV.覆盖度为1和1/4层(ML)时,H2分子在二维TiC单原子层表面的离解势垒分别为1.12和0.33 eV.因此,除了物理吸附与化学吸附,TiC表面还存在H单原子吸附.最大的H2储存率可以达到7.69％(质量分数).其中,离解的H原子、化学吸附的H2、物理吸附的H2的储存率分别为1.54％、3.07％、3.07％.符合Kubas吸附特征的储存率为3.07％.化学吸附能随覆盖度的变化非常小,这有利于H2分子的吸附与释放.     

过渡金属/氮掺杂石墨的制备及电催化氧还原

用简单的化学方法制备了过渡金属(TM)壳聚糖水杨醛席夫碱配合物,然后以此配合物为金属源和N源、以硝酸预处理石墨为载体,经热处理后制备了过渡金属/氮掺杂石墨催化剂TM-N-C-t(TM=Co,Ni,Cu;t=200,400,600,800,1 000℃).以此催化剂为修饰剂制备了玻碳修饰电极,并用循环伏安法(CV)和旋转圆盘电极(RDE)伏安法研究了催化剂TM-N-C-t的电化学行为和电催化氧还原(ORR)的催化性能,催化剂的组成和结构采用TG,FT-IR,XRD,XPS等技术进行了表征.研究结果表明,催化剂TM-N-C-t对ORR均显示不同程度的催化活性,其中以1 000℃热处理的钴基催化剂Co-N-C-1000的催化活性最好,其活性已接近相同条件下的商用催化剂JM 20%Pt/C,催化活性位主要为Co—N—C.根据扩散控制的不可逆反应的循环伏安行为,计算得到了TM-N-C-t催化剂电催化ORR的动力学参数,并以此提出了氧还原催化反应的机理,在活性最好的催化剂Co-N-C-1000修饰电极上,氧气以4e转移途径被还原为水.     

金属纳米复合催化剂合成与应用的最新进展

随着纳米技术的发展,金属纳米复合材料由于其特殊的物理化学性质和潜在的催化应用受到越来越多的关注。本文系统地介绍了金属纳米复合催化剂最新的研究进展。首先,我们介绍了一些金属纳米复合催化剂的合成方法。其次,为了更好的优化催化剂的结构与催化活性的关系,并深入理解催化反应机理,我们讨论了金属纳米复合催化剂一些重要因素(包括粒子粒径、形貌、组成、载体或配体)对催化活性和选择性的影响。最后,我们进一步介绍了金属纳米复合催化剂在还原不饱和化学键中的应用(N=O,N≡C和C=O),同时还对金属纳米复合催化剂的发展方向进行了展望。     

金属氯化物-苯并噻唑有机-无机杂化化合物的合成、表征及荧光性质

金属卤化物MCl₂（M=Pb²⁺,Cd²⁺,Co²⁺）分别与苯并噻唑（btz）在浓盐酸中、80 ℃下反应,合成了3种有机-无机杂化化合物：（btzH）[（PbCl₃）] （1）,（btzH）₂[CdCl₄]·2H₂O （2）和（btzH）₂[CoCl₄]·2H₂O （3）,其中化合物2和3结构相似。对化合物1~3进行了粉末衍射、红外和紫外光谱、元素分析、热重分析以及X射线单晶衍射表征。荧光测试发现：化合物1~3在393 nm处有发射峰,该荧光来源于苯并噻唑环中电子的π…π跃迁。     

Computational study of fluoroquinolone binding to and its applicability to future drug design

Fluoroquinolones are an important therapeutic class in the targeting of new and resistant bacterial infections. Fluoroquinolones bind to bacterial type II topoisomerase via a water‐Mg²⁺ bridge. However, binding to magnesium‐containing molecules outside of the target cells increases the minimum inhibitory concentration (MIC) and promotes drug resistance. As a result, fluoroquinolones are counter‐indicated with magnesium and multivalent metal cation containing drugs, such as antacids. The antibiotic efficacy of fluoroquinolones has also been shown to be pH dependent, as we show the effect of protonation state on magnesium binding. This work presents a systematic computational study of fluoroquinolones' magnesium‐binding properties. We use B3LYP density functional theory and triple‐zeta basis sets, to evaluate binding affinities. Complexation is predicted to be thermodynamically favorable at neutral and basic compared to acidic pH. The calculated complexation energies broadly capture experimental binding affinities, suggesting this is a valid approach for designing new fluoroquinolones with a target magnesium binding affinity. We also investigate the effect of chemical substitution at the carboxylic acid to help in the identification of potential new antibiotics based on the fluoroquinolone pharmacophore.     

Growth and characterization of ultrathin carbon films on electrodeposited Cu and Ni

Ultrathin carbon films were grown on different types of metallic substrates. Free‐standing foils of Cu and Ni were prepared by electroforming, and a pure Ni film was obtained by galvanic displacement on a Si wafer. Commercial foil of Ni 99.95% was used as a reference substrate. Carbon films were grown on these substrates by chemical vapour deposition in a CH₄‐H₂ atmosphere. Obtained films were characterized by Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), Auger electron spectroscopy, and ultraviolet photoemission spectroscopy. The XPS at grazing collection angle was used to determine the thickness of carbon films. Depending on the deposition parameters, the films of graphene or graphite were obtained on the different substrates. The uniformity of graphene and its distribution over the sample area were investigated from Raman data, optical images, and XPS chemical maps. The presence of graphene or graphite in the films was determined from the Raman spectra and Auger peak of C KVV. For this purpose, the D parameter, which is a fingerprint of carbon allotropes, was determined from C KVV spectra acquired by using X‐rays and electron beam. A formation of an intermediate layer of metal hydroxide was revealed in the samples with graphene overlayer.     

金属有机框架CPL-1填充柱气相色谱分析氢同位素

金属有机框架(MOFs)材料CPL-1的比表面积大、孔径均一,在低温条件下对氢同位素具有良好的量子筛分效应,是气相色谱固定相潜在的应用材料。采用CPL-1填充制备了长0.5 m、内径1 mm的微孔填充柱,借助单晶Al_2O_3颗粒间隙构建了色谱载气流通路径,在低温条件下探索研究了CPL-1填充柱的氢同位素分析性能。结果表明,在77 K时CPL-1对H_2和D_2的吸附量接近4 mmol/g,优于MnCl2/γ-Al_2O_3和γ-Al_2O_3,CPL-1填充柱在取样量0.25~2 mL范围内对低浓度氢同位素样品的检测具有良好的线性关系,检测的相对误差小于4%。CPL-1填充柱具有线性范围宽、重复性好、准确度高等优点,在氢同位素色谱分析中具有潜在的应用价值。