Effects of organic solvents on the structure stability of TS-1 for the ammoximation of cyclohexanone

The effects of organic solvents on the ammoximation of cyclohexanone to cyclohexanone oxime with H₂O₂and NH₃ over TS-1 were studied. To investigate the effects of ammonia and organic solvents on the structure stability of the catalyst, TS-1 samples were pretreated under severe conditions in ammonia solution or ammonia solution plus methanol, toluene or t-butanol, respectively, and then characterized bySEM, XRD, FTIR, etc. The results revealed that t-butanol is the best solvent for the ammoximation reaction; ammonia tends to destroy the active sites, -Ti-O-Si- structure in TS-1, but the presence of organic solvents remarkably limits this damaging effect of ammonia.     

5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮的合成

用1-芳酰基-5-苯基-2-硫代双脲与溴进行氧化成环反应制备了九个新的5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮, 相应的1-芳酰基-5-苯基-2-硫代双脲可以通过苯基脲与酰基异硫氰酸酯加成制得。     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Transformed steroids

The approaches to the synthesis of various 16,17-disubstituted pregna-4,9-dien-3,20-diones from the corresponding 9-derivatives with labile epoxide, dioxolane, and oxathiolane ringsD have been studied. The transformation has been found to proceed efficiently when the 9-sulfinic esters are used at the intermediate stage and then elimination of sulfinic acid by TsOH/SiO₂ is carried out.For part 193, see ref. 7.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 983–986, May, 1993.     

An approach to estimate the energy and strength of the intramolecular hydrogen bond in different conformers of 4‐methylamino‐3‐penten‐2‐one

The molecular structure and intramolecular hydrogen bond energy of 32 conformers of 4‐methylamino‐3‐penten‐2‐one were investigated at MP2 and B3LYP levels of theory using the standard 6–31G** basis set and AIM analyses. Furthermore, calculations for all the possible conformations of 4‐methylamino‐3‐penten‐2‐one in water solution were also carried out at B3LYP/6–31G** level of theory. The calculated geometrical parameters and conformational analyses in gas phase and water solution show that the ketoamine conformers of this compound are more stable than the other conformers (i.e., enolimine and ketoimine). This stability is mainly due to the formation of a strong N? H···O intramolecular hydrogen bond, which is assisted by π‐electrons resonance. Hydrogen bond energies for all conformers of 4‐methylamino‐3‐penten‐2‐one were obtained from the related rotamers method. The nature of intramolecular hydrogen bond existing within 4‐methylamino‐3‐penten‐2‐one has been investigated by means of the Bader theory of atoms in molecules, which is based on topological properties of the electron density. The results of these calculations support the results which obtained by related rotamers method. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Deoxypegan-1-one derivatives. synthesis and borohydride reduction of 3-[(E)-arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolin-1(2H)-ones

3-[(E)-Arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolin-1(2H)-ones were prepared by reaction of quinazolyl-2-propionic acid hydrochloride with aromatic aldehydes in acetic anhydride in the presence of Et₃N. 3-[(E)-Arylmethylidene]-1,2,3,9-tetrahydropyrrolo[2,1-b]quinazolin-1-ols were formed by reduction of the 3-arylidene derivatives with sodium borohydride in methanol, readily lost water when heated with acids, and were converted into 3-[(E)-arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolines. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 463–467, September–October, 2006.     

3-苯基-1-丁炔-3-醇质谱碎裂中[C8H7]^+的结构及分子内质子迁移反应

报道了3-苯基-1-丁炔-3-醇的常规电子轰击质谱(EIMS)。利用碰撞诱导解离(CID)技术研究了质谱碎裂过程中产生的[C8H7]^+的气相离子结构。同时, 氘代同位素交换、亚稳(MI)和CID实验进一步证实了m/z 103离子的形成并不是分子离子的质谱碎裂中顺次失去甲基自由基和中性CO分子的直接氢迁移的协同反应, 而是在失去CO分子前后发生了二次质子迁移反应的逐步过程。在此基础上提出了一种独特的双分子质子键合复合物中间体的碎裂机理。     

UHF-AM1 studies on 1,4 and 1,5 intramolecular H-atom transfer reactions in alkenyl radicals

The transition states of intramolecular 1,4 and 1,5 H-atom transfers, from/to primary (p), secondary (s) or tertiary alkyl (t) and primary (p _a), secondary (s _a) or tertiary (t _a) allyl carbon atoms, have been studied at the level of the semiempirical quantum-chemical method AM1 with the UHF approximation. The activation and reaction enthalpies were calculated and compared with experimental data available in the literature and the calculated data obtained for analogous reactions in alkyl radicals. Correlations were found between the activation enthalpies and the dissociation enthalpies of the bonds broken and formed.     

Studies on Molecular Recongnition of (a)-Cyclodextrin with Diphenyl compounds

The cyclodextrins(CDs) are a class of cyclic oligosaccharides made up of six(a), seven(a)or more [a-(1,4)-linked] D-glucopyranose units, and shaped like truncated cones with primary and secondary hydroxyl groups crowning the narrower rim and wider rim respectively. As they have a hydrophobic cavity of appropriate dimension, they can bind with various guest moleculars, such as hydrocarbon, cyclohexane, aromatic compounds, to form inclusion complexes. The cyclodextins inclusion complexation has been considered an ideal model mimicking the enzyme-substrate interaction and a lot of effect has been devoted to it. In this paper, we report our investigation on the inclusion complexation behavior of a-cyclodextrin(a-CD) with diphenyl compounds in order to further explore the molecular recongnition mechanism of 2:1 inclusion complexation of a-CD with aromatic compounds.Figure 1: Possible structures of the inclusion compounds.The inclusion complexation behavior of a-CD with sym-diphenyl-urea, sym-diphenyl-thiourea and diphenyl kotone as respective guest moleclars was studied by ultraviolet spectrometric titrations.The absorption spectral changes observed for the compounds in the absence and presence of a-CD are used to draw the corresponding Benesi-Hildebrand plots and caculate the complex stability constant value (Ks) for the inclusion compounds.The 2:1 inclusion complexations show higher binding constants by cooperative binding of one guest molecular in the closely two hydrophobic cyclodextrin cavites as compared with 1:1 inclusion complexations.The highest value observed for sym-diphenyl-urea could be due to the formation of a hydrogen bond between the carbonyl group and the hydrogen in the hydroxyl group of CD and this is not possible with sym-tiphenyl-thiourea. The lowest value observed for diphenyl kotone indicate the hydrophobic interaction is one of the binding force of cyclodextrin inclusion complex.     

Use of epoxidation and epoxide opening reactions for the synthesis of highly functionalized 1-oxaspiro[4.5]decan-2-ones and related compounds

Epoxidation of ethyl 3-(6-hydroxycyclohex-1-en-1-yl)propanoate (11) provided the syn epoxide 12. By invoking chelation controlled epoxide opening the triol derivatives 13 and 14 or the spiro lactone 25 could be obtained. Elimination of HBr from the bromides 26 and 27 produced the spiro cyclohexenones 28 and 29. Epoxidation of the double bond occurred in a diastereoselective manner to give epoxides 30 and 31, respectively. Treatment of the epoxide 31 with LiBr/AcOH gave the bromo hydrin 38. In a ‘merry go round’ fashion 38 was further functionalized on the cyclohexane ring by elimination, epoxidation, and epoxide opening resulting in the bromo hydrin 43. Other cyclohexane derivatives that were produced during these studies include the cyclohexenone 19 and the cyclohexanediol 23. In addition, enolate azidation of the spiro lactone 29 proceeded in a diastereoselective manner providing the α-azido lactone 32.