Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: Synthesis,characterization and gas permeation study

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430?g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10% weight loss temperatures and glass transition temperatures of polyesters were in the range 453–485?°C and 201–267?°C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H₂ and N₂ by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.     

The synthesis and copolymerization of 4-hydroxybenzylglycolide: experimental and theoretical aspects

Based on tyrosine, 4-hydroxybenzylglycolide was synthesized. Its study in ring-opening copolymerization with lactides in view of the ability of the phenolic hydroxy group to initiate polymerization was performed experimentally and with DFT modeling.     

热致型液晶聚合物的近晶相结构研究

本文借助于不同热处理样品的WAXD研究和变温FTIR分析,从液晶态与结晶态面间距的变化,晶态、液晶态和各向同性液态下结构构象的差异出发,研究了聚合物液晶态下的近晶相结构模型。     

Synthesis and Characterization of New Unsaturated Polyesters Containing 4‐Phenylcyclohexanone Moiety in the Main Chain

Two series of new unsaturated polyesters were prepared from 2,6‐bis(p‐hydroxidebenzylidene)‐4‐phenylcyclohexanone (I) and 2,6‐divanillyidene‐4‐phenylcyclohexanone (II) with adipoyl, isophthaloyl, sebacoyl and terephthaloyl dichlorides utilizing the interfacial polycondensation technique at ambient temperature. In addition to that, the model compounds were synthesized by reacting (I) and (II) with benzoyl chloride. The model compound and polyester samples have been characterized by elemental and spectral analyses. The unsaturated polyesters have inherent viscosities of 0.96–1.63 dl/g. All the polyesters are amorphous and most of them are partially soluble in most common organic solvents, but easily soluble in concentrated sulfuric acid. Their glass transition temperatures (T_g) range from190.15 to 245.28°C, and the temperatures of 10% weight loss as high as 180 to 220°C in air, indicating that these aromatic polyesters have high T_g and excellent thermal stability.     

Synthesis and characterization of poly(L-lactide-co-ε- caprolactone) copolymers: influence of sequential monomer addition on chain microstructure

A series of copolymers with various compositions were synthesized by one-step and two-step bulk ring-opening polymerizations of L -lactide (LA) and ε-caprolactone (CL) using stannous octoate [Sn(Oct)₂] and 1-hexanol as the initiating system. For the sequential two-step polymerization, a poly(ε-caprolactone) (PCL) prepolymer was polymerized first to a percent conversion of approximately 70% and LA then added in order to produce a copolymer with a chain microstructure different from that obtained from the corresponding one-step reaction. The resulting copolymers were characterized using a combination of nuclear magnetic resonance spectroscopy (¹H- and ¹³C-NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC). The average sequence lengths of the lactidyl ( ) and caproyl ( ) units, the degree of randomness (R) and the transesterification coefficient (T_(II)) were calculated from the ¹³C-NMR spectra. The appearance of a signal due to CapLCap sequences was directly attributable to transesterification of lactidyl (LL) units. It was found that both and values from the two-step syntheses were significantly longer than from the corresponding one-step syntheses, leading to different semi-crystalline morphologies and chain microstructures. The copolymers all showed at least some blocky chain structure as a result of the significant difference in monomer reactivity (LA > CL) between LA and CL. Thermal properties including stability depended on both composition and chain microstructure which could be controlled by the method of synthesis. From their DSC curves, the two-step copolymers were seen to be semi-crystalline whereas the one-step copolymers were mainly amorphous. A more blocky microstructure, as obtained from the two-step method, appeared to result in a lower thermal stability. Copyright © 2007 John Wiley & Sons, Ltd.     

带有端烷烃链的超支化聚酯的受限结晶及动态黏弹行为

以三羟甲基丙烷(TMP)为核,二羟甲基丙酸(DMPA)为支化单体,通过熔融缩聚法合成了第3代端羟基脂肪族超支化聚酯,并用十八酸对其进行端基改性,采用广角X射线衍射(WAXD)、示差扫描量热分析(DSC)及红外光谱(FTIR)研究了不同端基改性程度的超支化聚酯的结晶熔融行为及端烷烃链的构象和堆积结构随温度的变化,采用旋转流变仪研究了端烷烃链对脂肪族超支化聚酯熔体动态黏弹行为的影响.结果表明,这类改性超支化聚酯的结晶归因于长链端烷烃的有序排列,改性程度越高,衍射峰强度越大.受限结晶的端烷烃链在升温后并不能完全转变为无序的结构状态,改性超支化聚酯在"熔点"以上仍有部分有序结构存在.超支化聚酯的线性黏弹区随着端基改性程度的增大而逐渐变短,超支化聚酯的弹性逐渐增大,剪切变稀越明显.动态流变测试中所出现的现象与改性超支化聚酯中端烷烃链的受限密切相关.     

Study of Glow Wire Ignition Temperature (GWIT) and Comparative Tracking Index (CTI) performances of engineering thermoplastics and correlation with material properties

Recent regulation IEC 60335-1 ed.4 (2008) was introduced for materials used in electric appliance, establishing new limits in Glow Wire Ignition Temperature (GWIT) performance for materials used for electric connectors. Development of new products with high GWIT is possible, but the main issue is to keep good mechanical properties and processability, as well as tracking resistance (Comparative Tracking Index-CTI). Only a few patents and scientific publications exist about glow wire test performance of polymers. In this work we report GWIT and CTI properties for three engineering thermoplastic polymers (PBT, PET and PC). We have also studied the phenomena involved in this test, treating the phenomena with the parameterisation approach already used in the studies of the fire behaviour of polymers. PC, PBT and PET filled with 30% w/w glass fibres have been tested, and material properties that can be related to GWIT and CTI performance have been measured by TGA, Laser Flash Thermal Diffusivity (LFTD), Pyrolysis-GC/MS. CTI seems to be correlated with the char formation tendency of the materials, so PBT show a higher tracking resistance than PET and PC. Polycarbonate was the only material that passed the glow wire test (GWIT higher than 775 °C) but generally GWIT performance is not directly related with degradation temperature, since PET is thermally more stable compared with PBT, but less stable in glow wire test. The ignition process, together with the unsteady heat and mass transfer process characteristic of glow wire testing, are affected by many parameters at the same time. That’s why it is not easy to relate results of TGA, Laser flash, Pyrolysis-GC/MS with the glow wire ignition temperature of the materials tested, but the whole of these properties can give useful indication.     

Waterborne polyesters partially based on renewable resources

A new experimental approach for preparing biobased, water‐soluble polyesters (PEs) via titanium(IV) n‐butoxide‐catalyzed bulk polycondensation is presented. In the described method polymers were obtained from isosorbide, maleic anhydride and poly(ethylene glycol) (PEG). The chemical structure of the synthesized PEs was confirmed using 2D NMR spectroscopy and by titration methods. Careful analysis of 2D NMR spectra viz. correlation spectra (COSY), heteronuclear single quantum correlation spectra (HSQC) and heteronuclear multiple‐bond correlation spectra (HMBC) allowed to accomplish the complete proton assignment of isosorbide, PEG, and unsaturated acid residues in the PEs. Moreover, by using NMR spectroscopy the transformation of maleic anhydride into fumaric acid ester and the absence of maleic acid ester units in the final polymer were proven. However, during polycondensation part of the unsaturated bonds has reacted in a Michael addition with isosorbide or PEG. Gel permeation chromatography measurements revealed that the unsaturated PEs have M_n values in the range 3000–5000 g/mol. These PEs, with a low content of carboxylic acid end groups, exhibited sufficient thermal resistance for practical applications, for example, as free radical curable coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Magnesium complexes incorporated by sulfonate phenoxide ligands as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and trimethylene carbonate

Two novel sulfonate phenol ligands—3,3′‐di‐tert‐butyl‐2′‐hydroxy‐5,5′,6,6′‐tetramethyl‐biphenyl‐2‐yl 4‐X‐benzenesulfonate (X?CF₃, L^CF3 ‐H, and X?OCH₃, L^OMe ‐H)—were prepared through the sulfonylation of 3,3′‐di‐tert‐butyl‐5,5′,6,6′‐tetramethylbiphenyl‐2,2′‐diol with the corresponding 4‐substituted benzenesulfonyl chloride (1 equiv.) in the presence of excess triethylamine. Magnesium (Mg) complexes supported by sulfonate phenoxide ligands were synthesized and characterized structurally. The reaction of MgⁿBu₂ with L‐H (2 equiv.) produces the four‐coordinated monomeric complexes ( L^CF3 )₂Mg ( 1 ) and ( L^OMe )₂Mg ( 2 ). Complexes 1 and 2 are efficient catalysts for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and trimethylene carbonate (TMC) in the presence of 9‐anthracenemethanol; complex 1 catalyzes the polymerization of ε‐CL and TMC in a controlled manner, yielding polymers with the expected molecular weights and narrow polydispersity indices (PDIs). In ε‐CL polymerization, the activity of complex 1 is greater than that of complex 2 , likely because of the greater Lewis acidity of Mg²⁺ metal caused by the electron‐withdrawing substitute trifluoromethyl (? CF₃) at the 4‐position of the benzenesulfonate group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3564–3572, 2010     

Synthesis and characterization of tercopolymers derived from ε‐caprolactone,trimethylene carbonate,and lactide

A series of tri‐components copolymers with different molar ratios were synthesized via bulk ring‐opening copolymerization of trimethylene carbonate (TMC), L ‐lactide (LLA), and ε‐caprolactone (ε‐CL), using stannous octoate as catalyst. The sequence structure of the tercopolymer chain was characterized by ¹H and ¹³C nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The results showed that although block sequence of the corresponding monomers still existed in the tercopolymer chain, the random tercopolymers were ultimately obtained due to the transesterification during polymerization. For the samples TP1 and TP2, longer sequence of LLA existed in the molecular chains. The thermal properties of tercopolymers were investigated by differential scanning calorimetry (DSC) and the mechanical properties of the resulting copolymers were studied by using a tensile tester. The results indicated that the properties of these copolymers could be adjusted by changing the compositions of the copolymers. The resulting tercopolymers are expected to have potential uses as nerve regeneration and other biomedicine materials. Copyright © 2007 John Wiley & Sons, Ltd.