The band alignment at CdS/Cu2ZnSnSe4 heterojunction interface

Band alignment at CdS/Cu₂ZnSnSe₄ heterojunction interface is studied by X‐ray photoemission spectroscopy. The Cu₂ZnSnSe₄ thin films are prepared by selenization of electrodeposited Cu‐Zn‐Sn precursors. CdS overlayers with different thickness are sequentially grown on the Cu₂ZnSnSe₄ substrate by pulsed laser deposition process. Photoemission spectra are obtained before and after each growth to study the conduction and valence band offsets at the heterojunction interface. The determined conduction band offset of 0.34 eV indicates a spike‐like ‘type I’ band alignment at CdS/Cu₂ZnSnSe₄ interface. The spike will avoid interface recombination, and it is low enough that electron could transfer from the Cu₂ZnSnSe₄ layer to the buffer layer which is suitable for solar cell's fabrication. Copyright © 2012 John Wiley & Sons, Ltd.     

A quick and green ionic liquid-mediated approach for the synthesis of high-performance, organosoluble and thermally stable polyimides

Three diamine monomers with different derivatives of imidazole heterocyclic ring and meta-linked aryl ethers were synthesized and used in polycodensation reaction with various commercial dianhydrides for preparation of a series of novel poly(ether-imide) (PEI)s. The polycodensation reactions were carried out by using conventional method and in a green medium of ionic liquid (IL) without using NMP-pyridine-acetic anhydride. The PEIs were obtained in good yields (80% 96%) with moderate viscosity (0.48 0.66 dL/g) in a shorter reaction time (10 h) in IL as compared with the conventional method (36 h). All of the polymers were amorphous in nature, showed excellent solubility in amide-type polar aprotic solvents with ability to form tough and flexible films, and excellent thermal stability with Tgs in the range of 212 340 ℃ and 10% weight loss temperature (T10) up to 570℃ in N 2 and 528 ℃ in air.     

Synthesis and properties of new materials with banana-shaped achiral cores and chiral end groups

New chiral bent-core mesogens, derivatives of 1,3-phenylene bis[4-(alkanyloxyphenyliminomethyl)benzoate], were synthesized with variation of a substituent (X=F, Cl); their antiferroelectric properties are described. The mesomorphic and switching properties were characterized by differential scanning calorimetry, polarizing optical microscopy, triangular wave method, and X-ray diffractometry in the small and wide angle regions. The presence of chiral tails at the terminals of side wings in the bent-core molecules induced a decrease in transition temperature and formation of the switchable SmC* phase in the melt. In addition, the introduction of a lateral halogen substituent in the Schiff's base moiety prevented the regular stacking of the molecules, resulting in the formation of very complex optical textures. The smectic phase with F-substituted PBFDOB and Cl-substituted PBCDOB showed layer spacings of 39 and 38.5?Å, respectively, corresponding to the end-to-end distance of molecules with a bent conformation. Significantly, the smectic phases of PBFDOB and PBCDOB exhibited a period of 179.5 and 131?Å, respectively, compatible with a helical structure with periodicity about 4.6 and 3.4 times the layer spacings.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Synthesis and properties of novel 1,1‐difluoropropoxy‐linked liquid crystalline compounds of negative dielectric anisotropy

A series of liquid crystalline compounds having the difluoropropyleneoxy moiety (–OCF₂C₂H₄–) as a linking group has been synthesized. The physical properties, i.e. dielectric anisotropy, birefringence, viscosity and phase transition temperatures, have been measured. This novel class of compounds shows a larger negative dielectric anisotropy than the corresponding compounds having a propyleneoxy (–OC₃H₆–) linking group. Their dielectric properties may be explained by the combined effect of fluorine atoms with large electron negativities and the electron donating feature of an oxygen atom substituted on the same carbon atom. The semi‐empirical quantum calculation method (AM1) also confirmed this dielectric behaviour of the difluoropropyleneoxy linkage group.     

A small-angle X-ray scattering study of nanoparticle assembly in an aligned nematic liquid crystal

The assembly of colloidal particles in a nematic liquid crystal has been investigated using small-angle X-ray scattering. The structure and orientation of nanoparticle assemblies in bulk samples of aligned nematic liquid crystal have been determined. The method offers some advantages over optical microscopy, which is usually restricted to investigations of thin cells and micron-sized particles. The scattering from chains of particles has been calculated, and comparison with experimental results has shown that suspensions of 48 and 105 nm diameter silica nanoparticles formed highly ordered structures perpendicular to the liquid crystal director, consistent with quadrupolar defect-induced assembly.     

A study of the transition of liquid-crystal alignment from homeotropic to planar on a polyimide layer

The alignment of nematic liquid crystals by rubbed polyimide surfaces has been well-studied and developed. A novel polyimide film which induced a homeotropic alignment of the nematic liquid crystal without rubbing or with weak rubbing strength was presented. However, there was a transition from homeotropic to planar alignment of the nematic liquid crystal after strong rubbing. In order to study the transition, the polyimide surface was investigated by atomic force microscopy, surface free energy measurement and angle-resolved analysis X-ray photo-electron spectroscopy before and after rubbing with a velvet fabric. It was found that both the change of surface polarity and surface morphology were not the reasons for the transition. The droop of the side chain on the polyimide surface after the rubbing treatment was detected by angle-resolved analysis X-ray photo-electron spectroscopy. Owing to the special structure of the novel polyimide, the X-ray photo-electron spectroscopy was successfully used for the first time to analyse the conformational change of the side chain of a polymer. In conclusion, the transition of nematic liquid crystal alignment from homeotropic to planar after rubbing was influenced by the side chain conformation of the polyimide.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Ferroelectric liquid crystals from banana-shaped achiral molecules with vinyl end groups

Banana-shaped achiral compounds, the 1,3-phenylene bis[4-(alkenyloxyphenyliminomethyl)benzoate]s, were synthesized with varying length of the alkenyl group; their ferroelectric properties are described. The smectic mesophases, including a switchable chiral smectic C (SmC*) phase, were characterized by differential scanning calorimetry, polarizing optical microscopy and the triangular wave method. The presence of vinyl groups at the ends of the linear side-wings in the banana-shaped achiral molecules, containing a Schiff's base mesogen, induced a decrease in melting temperature and formation of the switchable SmC* phase in the melt. The compound having the octenyloxy group exhibited a spontaneous polarization of 120 nC cm^?2 on reversal of an applied electric field.