低压下酞菁裂解法制备定向碳纳米管阵列

在低压条件下以酞菁铁为原料, 采用独立双温控加热系统在石英玻璃基底上气相沉积制备了大面积准直性好和管径均匀的碳纳米管. 利用扫描电子显微镜(SEM/FESEM)和透射电子显微镜(TEM)研究了定向碳纳米管的生长形态和结构. 详细讨论了系统真空度、反应温度、气体流速及氢气和氩气的体积比例等参数对碳纳米管生长的影响, 并测试了该碳纳米管的场发射性能及超电容性能.     

Development of Disposable Carbon Nanofibers Electrodes Supported on Filters

The purpose of this work is to develop simple and reproducible ways to fabricate carbon nanofibers (CNFs) electrodes. Disposable CNFs electrodes were fabricated after filtering CNFs through polytetrafluoroethylene filters (PTFE), using directly as electrodes these filters with the CNFs film. The electrochemical behaviour of CNFs/PTFE electrodes were tested with ferrocenemethanol and tris(2,2′‐bypyridyl)dichlororuthenium(II) (Ru(bipy)₃²⁺). As a proof of concept of the analytical usefulness of the CNFs/PFTE electrodes, the study of vitamin B₁₂ was carried out. Multivariate calibrate has been successfully used to determine vitamin B₁₂ in a complex medium with vitamins B₁ and B₆ as interferents.     

The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing

l ‐lactide monomers were grafted onto cellulose nanofibers (CNFs) via ring‐opening polymerization, forming poly(lactic acid) grafted cellulose nanofibers (PLA‐g‐CNFs). PLA‐g‐CNFs and pristine PLA were then blended in chloroform and dried to prepare a master batch. PLA‐g‐CNFs/PLA composite filaments targeted for 3D printing were produced by compounding the master batch in PLA matrix and melt extrusion. The as‐extruded composite filaments were subsequently thermal annealed in a conventional oven, and their morphological, thermal, and mechanical properties were evaluated. PLA was successfully grafted on the surface of CNFs as demonstrated by elemental analysis, and the concentration of grafted PLA was estimated to be 33 wt %. The grafted PLA were highly crystallized, contributing to the growth of crystalline regions of PLA matrix. The incorporation of PLA‐g‐CNFs improved storage modulus of the composite filaments in both low temperature glassy state and high temperature rubbery state. Postextrusion annealing treatment led to 28 and 63% increases for tensile modulus and strength of the filaments, respectively. Simulated Young's moduli from the Halpin‐Tsai and Krenchel models were found comparable with the experimental values. The formed composite filaments are suitable for use in 3D printing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 847–855     

Preparation and characterization of Pt-supported porous graphite nanofibers

In this work, porous graphite nanofibers (PGNFs) were manufactured as promising catalyst supporter by a physical activation method for direct methanol fuel cells, and Pt nanoparticles were loaded on the PGNFs in order to prepare electrode materials by a chemical reduction method. The pore structures of the Pt/PGNFs were analyzed by N₂ adsorption isotherms at 77 K. Electrocatalytic activities of final products were investigated by voltammetry and conductivity measurements in a 1.0 M CH₃OH/0.5 M H₂SO₄. As a result, electrocatalytic activities of Pt/PGNFs were increased in the presence of Pt particles on the PGNFs and with increasing the specific surface area of the carbons.     

Atmospheric plasma treatment of pre‐electrospinning polymer solution: A feasible method to improve electrospinnability

The electrospinnability of polyethylene oxide (PEO) was manipulated by atmospheric plasma treatment of pre‐electrospinning solutions. Conductivity, viscosity, and surface tension of PEO solutions increased after plasma treatment, and the plasma effect remained longer when the solution concentrate increased. Both untreated and treated solutions were then electrospun, and the morphology of the resultant nanofibers was observed by SEM. Atmospheric plasma treatment improved the electrospinnability of PEO solutions and led to less beads and finer diameter distribution in the resultant nanofibers. Additionally, plasma treatment of the pre‐electrospinning solutions affected the crystal structure of resultant nanofibers. These results suggest that atmospheric plasma treatment is a feasible approach to improve the electrospinnability of polymer solutions and can used to control the structure of electrospun nanofibers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Straightness Measurement Using Laser Diode and CCD Camera

１ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｍａｎｕｆａｃｔｕｒｅａｎｄａｓｅｍｂｌｅｏｆｍｏｄｅｒｎｍａｃｈｉｎｅｓａｎｄｉｎｓｔｒｕｍｅｎｔｓ，ａｎｉｎｄｉｓｐｅｎｓａｂｌｅｒｅｑｕｉｒｅｍｅｎｔｉｓｔｈｅｃｏｎｔｒｏｌｏｆｆｏｒｍａｎｄｐｏｓｉｔｉｏｎｅｒｏ...     

Phase morphology and mechanical properties of the electrospun polyoxymethylene/polyurethane blend fiber mats

Polyoxymethylene/thermoplastic polyurethane (POM/TPU) blends containing 10–30 wt % of TPU were electrospun using hexafluoroisopropanol as the solvent. The average fiber diameter increases with the increase in TPU content from 0.68 μm for neat POM fibers to 0.92 μm for POM/TPU 7:3 blend fibers due to the increase in solution viscosity. Core/sheath structure with the major component POM as the core and the minor component TPU as the sheath was observed by transmission electron microscopy and further confirmed by surface N contents of the blend fiber mats. The crystalline melting point and the degree of crystallinity of POM have no obvious change by coelectrospinning with TPU due to lack of interaction between POM and TPU as revealed by Fourier transform infrared spectroscopy. Tensile tests showed that the unusual high ductility of POM fiber mat could be further increased by coelectrospinning with 10 or 20 wt % TPU without significantly decreasing the stiffness and strength. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1853–1859, 2009     

Well Oriented ZnO Nanorods Array: Negative Resistance and Optical Switching

Well‐oriented ZnO nanorods (NRs) arrays were grown on Si, alumina, quartz, and FTO substrates through a ZnO seed layer followed by low temperature wet chemical process. The influence of sputtered ZnO seed layer thickness (100, 50, 32, and 16 nm), annealing temperature and CuO_x coverage on the characteristics of ZnO NRs were investigated in this study. The crystalline structural, chemical, morphological, optical, and electrical properties of ZnO NRs arrays were studied by X‐ray diffraction (XRD), field emission‐ scanning electron microscopy equipped by energy dispersive X‐ray spectroscopy (FE‐SEM/EDX), Raman scattering, UV/Vis ‐ near IR absorption spectroscopy and current‐voltage characteristic. XRD and Raman spectra measurement revealed that the synthesize ZnO displayed hexagonal wurtzite structure. The individual rod diameter, density, and orientation can be controlled by varying the seed layer thickness. The mean diameter and maximum length of ZnO NRs are around 55–66 nm and 282 nm, respectively. ZnO NRs/ ZnO thin film structure shows optical switching and negative differential resistance behavior as applicable to ON/OFF gate and memory devices.     

Electrospun recycled PET-based mats: Tuning the properties by addition of cellulose and/or lignin

The aim of this study was to evaluate the influence of cellulose and/or lignin on the properties of mats prepared from dissolution (for 48 h or 72 h, solvent: trifluoroacetic acid) of recycled poly (ethylene terephthalate) (PET). Briefly, the presence of cellulose led to a tendency of higher average fiber diameter and average pore area as well as lower average porosity compared to the neat mat (PET_ref, 242 ± 59 nm, 9.6 ± 1.1 10⁴ nm² and 19.0 ± 1.1%, respectively). The T_g values for electrospun PET combined with cellulose and/or lignin were higher than that of PET_ref (92.5 ± 0.1 °C), and the tensile strength increased with the cellulose and/or lignin loading. In addition, the presence of lignin (72 h of dissolution) led to a mat with an elongation at break of 149 ± 9% compared to 14 ± 2% for PET_ref. The results indicated that the properties of mats based on PET can be tuned by adding cellulose and/or lignin to solutions posteriorly electrospun as well as by varying the dissolution time.