PMMA/定向碳纳米管复合材料导电与导热性能的研究

Methyl Methacrylate(MMA) has been filled in the apertures of aligned carbon nanotubes(ACNTs). Then PMMA/ACNTs composites have been synthesized by in-situ polymerization. The SEM results show that carbon nanotubes are well dispersed and directionally arranged in the composites. The electrical conductivities of the parallel direction (parallel with ACNTs) and perpendicular direction (perpendicular with ACNTs) of composites were respectively tested to be 15 S·cm^-1 and 4 S·cm^-1, so the composites were conductivity anisotropic. Compared with PMMA, the thermal stable temperature of composites in air was improved by 100 ℃,and the thermal conductivity of composites was 13.64 times of PMMA.     

静电纺丝法制备硫酸化的二氧化锆/二氧化硅复合纤维

将电纺丝技术与溶胶-凝胶技术相结合, 制备了SZ粒子分布于SiO2纤维外壁的硫酸化的二氧化锆/二氧化硅复合纤维. 与常见的SZ复合催化剂相比, 采用SiO2纤维负载SZ不仅可以解决粉体材料带来的难以与反应体系分离等弊病, 同时功能粒子SZ分布与纤维外壁的结构也提高了功能粒子的利用率.     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

碳纤维表面原位SiC纳米纤维的合成与生长

基于化学气相反应法,以高纯Si和SiO₂为反应源材料,在碳纤维表面原位生长β-SiC纳米纤维。采用XRD、SEM和TEM 等分析测试手段对SiC纳米纤维进行了表征分析,研究了不同反应温度和时间对生成β-SiC纳米纤维微观形貌和结构的影响,并探讨了β-SiC纳米纤维的生长机制。研究结果表明：采取化学气相反应法能够制备高质量、高纯度的β-SiC纳米纤维,纳米纤维的直径约为100~300 nm。随着反应温度的提高和时间的延长,纳米纤维的产额增加,且微观组织形貌发生了变化。结合制备过程和纳米纤维微观结构的观察分析,表明气-固(VS)机制是SiC纳米纤维生长的主要机理。     

碳纳米纤维负载Co3S4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴（Co₃S₄）催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co²⁺/Co³⁺用于染料敏化太阳电池（dye-sensitized solar cells,简称DSCs）来研究其光电性能。测试结果显示,基于Co₃S₄对电极,DSCs的能量转化效率（power conversion efficiency,简称PCE）只有6.06%,远远低于Pt对电极（8.05%）。为了提高Co₃S₄的催化能力,采用静电纺丝技术制备碳纳米纤维（electrospun carbon nanofibers,简称ECs）,结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴（Co₃S₄/ECs）复合催化材料用于对电极,结果表明,Co₃S₄/ECs的PCE最高可达（8.22±0.08）%,优于Pt对电极。     

丝素纤维/硫酸钙抗感染骨材料的制备及性能

通过控制丝素蛋白自组装过程制备了溶液状态下的丝素纳米纤维（silk fibroin nanofibers,SFFs）,与硫酸钙、万古霉素（vancomycin,VCM）复合,制备了VCM/CS/SFFs抗菌骨材料。通过SEM、XRD、紫外分光光度计、万能力学试验机、抑菌圈、MTT等手段分别研究了复合材料的微观形貌与结构、药物释放、力学、抑菌及细胞相容性等性能。结果显示,与水作为固化液相比,随着SFFs溶液（0.017 5~2.1 mg·mL^-1）的加入,复合材料凝固时间可控,降解率逐渐降低,抗水性增强,韧性提高;同时随丝素纳米纤维含量的增加骨材料抗压强度表现为先增加后减小的趋势,一周内药物释放速率降低;材料同时具有抑菌作用;MTT实验结果显示,加入丝素纳米纤维后与纯的硫酸钙相比MC3T3细胞增殖明显。     

载气气氛对Co/MgMoO4催化剂CVD法高效合成碳纳米材料的影响

High yield and quality mutli-walled carbon nanotube (MWNT) bundles and carbon nanofibers were synthesized by catalytic decomposition of methane over Co/MgMoO₄ catalyst at 1 000 ℃. TEM studies showed that the products were mainly carbon nanofibers without carrier gas and were all MWNT bundles with hydrogen or nitrogen as carrier gas. Thermal gravimetric analyses (TGA) on the raw product indicated that the purity of MWNT was higher than 95wt%. The growth mechanism of carbon nanofibers and MWNTs was also discussed.     

丝素纤维/硫酸钙抗感染骨材料的制备及性能

通过控制丝素蛋白自组装过程制备了溶液状态下的丝素纳米纤维(silk fibroin nanofibers,SFFs),与硫酸钙、万古霉素(vancomycin,VCM)复合,制备了VCM/CS/SFFs抗菌骨材料。通过SEM、XRD、紫外分光光度计、万能力学试验机、抑菌圈、MTT等手段分别研究了复合材料的微观形貌与结构、药物释放、力学、抑菌及细胞相容性等性能。结果显示,与水作为固化液相比,随着SFFs溶液(0.017 5~2.1 mg·m L~(-1))的加入,复合材料凝固时间可控,降解率逐渐降低,抗水性增强,韧性提高;同时随丝素纳米纤维含量的增加骨材料抗压强度表现为先增加后减小的趋势,一周内药物释放速率降低;材料同时具有抑菌作用;MTT实验结果显示,加入丝素纳米纤维后与纯的硫酸钙相比MC3T3细胞增殖明显。     

多孔碳纳米纤维负载Pd纳米颗粒用于增强电催化氧还原性能

采用溶剂热法合成了以锆为金属核心、2-氨基为配体的锆基金属有机骨架(UiO-66)纳米材料,通过静电纺丝技术制备出UiO-66自由分散的聚丙烯腈(PAN/UiO-66)纤维,可控热解得到多孔碳纳米纤维(porous carbon nanofibers,PCNFs),结合湿化学还原法在PCNFs表面沉积Pd纳米颗粒,得到PCNFs@Pd复合材料。通过扫描电子显微镜、透射电子显微镜、X射线衍射技术对其形貌、组成、结构进行表征;采用电化学工作站分别测试了PCNFs@Pd在0.1 mol·L^-1KOH和0.1 mol·L^-1HClO₄电解质中氧还原性能(oxygen reduction reaction,ORR)。结果表明,在PAN纤维中添加UiO-66显著提高了PCNFs@Pd(Pd负载量为0.34%)复合材料的ORR性能。相比40%Pt/C,在碱性电解质中,PCNFs@Pd复合材料展示出更低的Tafel斜率、更优异的循环稳定性和耐甲醇中毒性。在酸性电解质中也表现出类似20%Pt/C的催化活性和循环稳定性。     

Bruch’s-Mimetic Nanofibrous Membranes Functionalized with the Integrin-Binding Peptides as a Promising Approach for Human Retinal Pigment Epithelium Cell Transplantation

Background: This study aimed to develop an ultrathin nanofibrous membrane able to, firstly, mimic the natural fibrous architecture of human Bruch’s membrane (BM) and, secondly, promote survival of retinal pigment epithelial (RPE) cells after surface functionalization of fibrous membranes. Methods: Integrin-binding peptides (IBPs) that specifically interact with appropriate adhesion receptors on RPEs were immobilized on Bruch’s-mimetic membranes to promote coverage of RPEs. Surface morphologies, Fourier-transform infrared spectroscopy spectra, contact angle analysis, Alamar Blue assay, live/dead assay, immunofluorescence staining, and scanning electron microscopy were used to evaluate the outcome. Results: Results showed that coated membranes maintained the original morphology of nanofibers. After coating with IBPs, the water contact angle of the membrane surfaces varied from 92.38 ± 0.67 degrees to 20.16 ± 0.81 degrees. RPE cells seeded on IBP-coated membranes showed the highest viability at all time points (Day 1, p < 0.05; Day 3, p < 0.01; Days 7 and 14, p < 0.001). The proliferation rate of RPE cells on uncoated poly(ε-caprolactone) (PCL) membranes was significantly lower than that of IBP-coated membranes (p < 0.001). SEM images showed a well-organized hexa/polygonal monolayer of RPE cells on IBP-coated membranes. RPE cells proliferated rapidly, contacted, and became confluent. RPE cells formed a tight adhesion with nanofibers under high-magnification SEM. Our findings confirmed that the IBP-coated PCL membrane improved the attachment, proliferation, and viability of RPE cells. In addition, in this study, we used serum-free culture for RPE cells and short IBPs without immunogenicity to prevent graft rejection and immunogenicity during transplantation. Conclusions: These results indicated that the biomimic BM-IBP-RPE nanofibrous graft might be a new, practicable approach to increase the success rate of RPE cell transplantation.