Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

Separation of phytosterol oxidation products by combination of different polarity gas chromatography capillary columns

The number of characterized phytosterol oxidation products (POPs) from both ring- and side-chain structures has increased during recent decades, resulting in difficulties in the separation of POPs on different gas chromatography (GC) capillary columns. The main objective of this study was to separate a mixture of 29 purified and characterized oxidation products from sito-, campe- and stigmasterol using GC capillary columns with different polarity. For the first time in the area of POPs analysis, the separation efficiency of the combination of two capillary GC columns with different polarities was investigated. A non-polar 5% phenyl coated (DB5-MS) and a mid-polar 35% phenyl coated (DB35-MS) column was combined with a pressfit connector. The main improvement was enhanced base line separation for many of the analyzed POPs, compared with the separations achieved using the individual columns. However, three pairs of POPs co-eluted: 24-hydroxysitosterol/campesterol-5beta,6beta-epoxide, stigmasterol-5beta,6beta-epoxide/campesterol-5alpha,6alpha-epoxide and stigmasterol-5alpha,6alpha-epoxide/campestanetriol.     

Reactions of 5-dialkylamino-1,2,3-thiadiazole-4-carbaldehydes with amines as a method for the synthesis of 1,2,3-triazole-4-carbothioamides

A method for the synthesis of previously inaccessible 5-dialkylamino-substituted 1,2,3-thiadiazole-4-carbaldehydes was developed. Ring transformation in these compounds induced by primary aliphatic and aromatic amines, hydroxylamines, and N-substituted hydrazines resulted in the synthesis of a broad range of 1,2,3-triazole-4-carbothioamide.     

A novel reaction of allylic alcohols with hexafluoropropene-diethylamine adduct (PPDA) to form 2-fluoro-2-trifluoromethyl-4-alkenamide

Treatment of allylic alcohols with hexafluoropropene-diethylamine adduct (PPDA) afforded N,N-diethyl-2-fluoro-2-trifluoromethyl-4-alkenamides which were formed by the Claisen rearrangement of intermediary 2-alkenyl-1-diethylamino-2,3,3,3-tetrafluoro-1-propenyl ethers. Although (E)-allylic alcohols gave two diastereomeric products in about 1:1 ratio, (Z)-allylic alcohols gave the corresponding product as a single diastereomer.     

Synthesis, structure, and electrochemical properties of 12,42-dioxo-21,31-diphenyl-7,10,13-trioxa-1,4(3,1)-diquinoxalina-2(2,3),3(3,2)-diindolizinacyclopentadecaphane

The oxidative dehydrocyclization of the 3-(indolizin-2′-yl)-2-oxoquinoxaline monopodand performed either electrochemically or under the action of molecular iodine affords new redox-active heterocyclophane consisting of the redox-switchable biindolizine fragment combined with the polyether-bridged π-deficient quinoxaline systems. The single-crystal X-ray diffraction study showed that the trioxaundecane chain of heterocyclophane adopts an extended conformation, and one of the phenyl substituents of the molecule closes the pseudocavity formed by the spacer from one of the sides. The cyclic voltammetric study of heterocyclophane in MeCN and DMF showed the three-step oxidation of the indolizine fragments accompanied by the single-electron transfer in each step. The first and third steps are reversible, and the second step is irreversible. The oxidation at potentials of the first peak gives rise to stable radical cations detected by the ESR method (g = 2.0024, a _2N = 0.26 mT). Dedicated to Professor E. A. Berdnikov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1991–2003, October, 2007.     

正丁烷氧化制顺酐流化床催化剂的性能

 考察了前驱体制备过程中水合肼／五氧化二钒摩尔比（以下简记\r\n为n（N2H4）／n（V2O5））对催化剂性能的影响．由较高的n（N2H4）\r\n／n（V2O5）比制得的催化剂，其（VO）2P2O7相含量较多，正丁烷转化\r\n率较高．随着n（N2H4）／n（V2O5）比的减小，δ－VOPO4相的含量逐\r\n渐增多，正丁烷转化率随之升高；而顺酐选择性开始时升高，达到最大\r\n值后逐渐降低．在n（N2H4）／n（V2O5）＝0．34时制备的催化剂最佳\r\n，在丁烷浓度为4．0％、空速为500h－1及反应温度为420℃的反应条件\r\n下，顺酐收率可达49．74％．本文中细粒床催化剂有较大的操作弹性．     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

Redox thermochemistry of SrFe1-xCoxO3-d

The enthalpy of oxidation of SrFe_1-xCo_xO_3-d with x=0.33 and 0.67 has been determined by adiabatic calorimetry; average values for x=0.33 and 0.67 are -67±11 and -49.5±9 kJ (mol O₂)^-1. These data and the previously reported value for SrFeO_3-d suggest that the enthalpy of oxidation for pure (perovskite-type) SrCoO_3-d is close to zero. Earlier reported composition - partial pressure data for SrFe_0.67Co_0.33O_3-d are reproduced when preferential oxidation of iron is assumed for low partial pressures of oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

锌和锡参与下末端环氧化物的选择性烯丙基化反应

烯丙基溴和金属辛或锡成功地将末端环氧化合物1一锅法合成高烯丙基醇2和双高烯丙基醇3. 还研究了环氧化合物取代基的影响, 并提出了此烯丙基化的反应途径 .     

One-electron oxidation of the iron(II) complex of 1,10-phenanthroline-5,6-quinone A pulse radiolysis study

One-electron oxidation of the ferrous tris-PQ complex, a model for lipoxygenase, was attempted using oxidants such as •OH, N^•₃, Br^•-₂, Tl²⁺ and TlOH⁺. •OH was found to react with the complex with a bimolecular rate constant of (3.9±0.6)x10⁹dm³mol^-1s^-1, a rate which is not very dissimilar to that for the reaction with the ligand PQ. However the product of the reaction was found to be a OH-adduct rather than a cation radical. No reaction was found to occur with N^•₃ or Br^•-₂. Both Tl²⁺ and TlOH⁺ reacted with the complex to form its oxidised species with rate constants of (7.0±1)x10⁸dm³mol^-1s^-1 and (4.0±0.8)x10⁸dm³mol^-1s^-1, respectively. From a comparison of the rate constants and the transient spectra it was concluded that the centre of oxidation is the ligand rather than the metal.