Molybdenum(VI)-complexes with chiral N,O-ligands derived from carbohydrates: synthesis, structure and catalytic properties in asymmetric olefin epoxidation

Novel chiral 2′-pyridinyl alcohols derived from isopropylidene-protected carbohydrates are reported. They show different characteristics at the hydroxy group, but are all suitable ligands for chiral molybdenum(VI) complexes of the type MoO₂L₂ (L = chiral 2′-pyridinyl alcoholate). MoO₂(acac)₂ served as starting material in the complex syntheses. The structure of one ligand and one dioxo complex were exemplary established by X-ray crystallography. For catalytic runs in the enantioselective epoxidation catalysis trans-methylstyrene was used as model substrate, tert-butylhydroperoxide and cumolhydroperoxide, resp., as the oxidant.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

新型糠醛加氢制糠醇催化剂研究

新型糠醛加氢制糠醇催化剂研究林培滋，黄世煜，周焕文，赵彤彤，刘崇早，罗洪原，梁东白（中国科学院大连化学物理研究所，大连１１６０２３）关键词铜催化剂，糠醛，加氢，糠醇糠醇是重要的化工原料，糖醇树脂是耐酸、碱腐蚀的材料，在工业发达的国家中，铸造工业广泛采...     

贵金属对钴基催化剂上肉桂醛选择加氢反应的影响

 研究了贵金属改性的Co／γ－Al2O3催化剂上的肉桂醛选择加氢反应．结果表明，通过Pt，Pd和Ru贵金属改性，提高了催化剂的活性，但只有Pt改性的催化剂具有较高的选择性．w（Pt）＜0．5％时，催化剂的活性随着Pt含量的增加呈直线升高，当w（Pt）＝0．5％时，催化剂活性可提高近5倍，但催化剂的选择性变化很小．XRD结果表明，催化剂经还原后，γ－Al2O3上的钴主要为α－Co0．TPR结果表明，Pt的加入提高了Co3O4的还原性能，且Pt含量越高，Co3O4的还原温度越低．XPS结果表明，Pt改性的催化剂样品，其Co3O4大部分被还原为Co0．由于Pt与Co具有协同效应，故Pt改性的Co／γ－Al2O3催化剂既具有较高的活性，又具有很高的选择性．     

Cu2+与烟草多酚氧化酶相互作用研究

本文通过酶活性测定，荧光光谱和紫外光谱研究了外加Cu²⁺与烟草多酚氧化酶(简称PPO)的相互作用。结果表明，微量铜的加入能增加酶的活性，[Cu²⁺]/[PPO]为0.20左右时酶活性最大，[Cu²⁺]/[PPO]为0.91时，Cu²⁺开始表现出对PPO活性的抑制;Cu²⁺对PPO内源荧光的猝灭机制属于形成络合物所引起的静态猝灭，猝灭常数K_sv为8.0375×10³L·mol^-1;Cu²⁺的加入使PPO蛋白质分子构象发生变化，α-螺旋含量增加，多肽链及Trp和Tyr残基的芳杂环进一步向分子内收缩，疏水基团之间的疏水作用增强。     

高含水聚乙烯醇弹性体

本文介绍了用反复冻结～融溶过程制备高含水聚乙烯醇弹性体的方法,并测定了该弹性体的机械、溶解和溶胀性能。结果表明,该弹性体可同时具有很高的含水率(85—90％)和较高的抗张强度(10~5—10~6Pa),且在37℃的水中有良好的稳定性能。     

Direct catalytic asymmetric Mannich-type reactions of isomerizable aliphatic imines: chemoselective enolate formation from a hydroxyketone by a Zn-catalyst

A direct catalytic asymmetric Mannich-type reaction of isomerizable aliphatic imines is described. A Et₂Zn/(S,S)-linked-BINOL complex was suitable for chemoselective enolate formation from a hydroxyketone in the presence of isomerizable aliphatic N-diphenylphosphinoyl imines. The reaction proceeds smoothly and β-alkyl-β-amino-α-hydroxyketones were obtained in good yield and high enantioselectivity (up to 99% ee), albeit in modest to low diastereoselectivity.     

Reaction kinetics of the selective liquid phase hydrogenation of styrene oxide to β-phenethyl alcohol

Liquid phase hydrogenation of styrene oxide using 1% Pd/C and NaOH as a promoter was found to give selectively β-phenethyl alcohol (PEA) under very mild conditions (313–333 K; 0.68–5.5 MPa). The kinetics of this system was investigated by collecting initial rate data in a batch slurry reactor. Rate of hydrogenation was found to decrease beyond a certain concentration of both hydrogen (>3 MPa) and styrene oxide (>0.5 kmol/m³). A Langmuir–Hinshelwood type rate equation has been proposed based on the initial rate data in the kinetic regime. The model predictions agree very well with the experimentally observed concentration–time data indicating the applicability of the proposed rate model.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

冻干保护剂溶液低温退火特性的研究

利用差示扫描量热仪(DSC)研究了10%叔丁醇/10%蔗糖/水溶液的冻结特性, 退火温度及退火时间, 分析了溶液的退火行为. 实验结果表明, 溶液降温时, 蔗糖的存在阻碍了叔丁醇析出, 最大冻结浓缩溶液玻璃化转变温度Tg′由－32.5 ℃降低到－42.0 ℃, 升温时在－30 ℃叔丁醇发生反玻璃化. 在反玻璃化峰附近的温度进行退火可使叔丁醇充分析出, Tg′由－42.0 ℃上升到－34.9 ℃. 所需的退火时间与退火温度有关, 退火温度越接近Tg′, 所需的退火时间越长. 在－37 ℃时, 退火20 min可完全消除反玻璃化.