X-Ray Investigation of Chiral β-Hydroxyketone Derived From (+)-Isomenthone

X-ray analysis was carried out to study the molecular structure of β-hydroxyketone, which is one of the minor products of selective aldol condensation of (−)-menthone with 4-carbomethoxybenzaldehyde. The cyclohexanone ring of the compound has a practically undistorted chair conformation with an axial orientation of the 1-methyl group and the bulkiest 2-[1′-hydroxy-1′ -(4-carbomethoxyphenyl)]methyl substituent and the equatorial orientation of the isopropyl group in the 4 position. The stereochemical configuration was found to be (1R,2R,4 R, 1′ S), supporting that the compound belongs to the group of (+)-isomenthones; i.e., the starting (-)-menthone undergoes (to a certain extent) epimerization under the reaction conditions used. In crystal, there is intermolecular hydrogen bonding >C=O...HO- (the -O...H- bond length is 2.15 Å). The molecular conformation in hydroxyketone crystals differs from the one which prevails in solutions (according to previous NMR data) and which is characterized by an inverted cyclohexanone ring and intramolecular hydrogen bonding >C=O...HO.Original Russian Text Copyright © 2004 by S. V. Shishkina, T. G. Drushlyak, L. A. Kutulya, N. S. Pivnenko, and O. V. Shishkin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 933–940, September–October, 2004.     

Phenol O–H bond dissociation energy in water clusters

We are reporting ab initio and density functional theory (DFT) calculations for the phenol O–H bond dissociation energy in the gas phase and in phenol–water clusters. We have tested a series of recently proposed functionals and verified that DFT systematically underestimates the O–H bond dissociation energy of phenol. However, O–H bond dissociation energies in water clusters are in reasonable agreement with experimental data for phenol in solution. We have evaluated electronic difference densities in phenol–water, phenoxy–water, and water, and we are suggesting that the representation of this quantity gives an interesting picture of the electronic density rearrangement induced by hydrogen bond interactions in phenol–water clusters. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

A sequence and structural study of transmembrane helices

A comparison is made between the distribution of residue preferences, three dimensional nearest neighbour contacts, preferred rotamers, helix-helix crossover angles and peptide bond angles in three sets of proteins: a non-redundant set of accurately determined globular protein structures, a set of four-helix bundle structures and a set of membrane protein structures. Residue preferences for the latter two sets may reflect overall helix stabilising propensities but may also highlight differences arising out of the contrasting nature of the solvent environments in these two cases. The results bear out the expectation that there may be differences between residue type preferences in membrane proteins and in water soluble globular proteins. For example, the -branched residue types valine and isoleucine are considerably more frequently encountered in membrane helices. Likewise, glycine and proline, residue types normally associated with `helix-breaking' propensity are found to be relatively more common in membrane helices. Three dimensional nearest neighbour contacts along the helix, preferred rotamers, and peptide bond angles are very similar in the three sets of proteins as far as can be ascertained within the limits of the relatively low resolution of the membrane proteins dataset. Crossing angles for helices in the membrane protein set resemble the four helix bundle set more than the general non-redundant set, but in contrast to both sets they have smaller crossing angles consistent with the dual requirements for the helices to form a compact structure while having to span the membrane. In addition to the pairwise packing of helices we investigate their global packing and consider the question of helix supercoiling in helix bundle proteins.     

A computational study of the LiH dimer

A theoretical study of the properties of the linear LiH dimer was undertaken. In this dimer, an unusual type of hydrogen bonding (termed "inverse" hydrogen bonding by some authors), which involves the hydrogen bonded molecule acting as an electron donor (rather than as a proton donor), is exhibited. The optimized geometry, dipole moment, interaction energy, atomic charges, harmonic vibrational frequencies, and frequency shifts for the dimer are computed at the SCF, MP2, and QCISD levels of theory using mainly a 6-31++G(d,p) basis set. We also examined the relative stability of the mono-deuterated isotopomers of linear (LiH)(2), i.e., Li-H...Li-D and Li-D...Li-H. Analysis of the normal vibrational modes, changes in the partial atomic charges, and changes in the vibrational frequencies of LiH on complexation were used to gain insight into the bonding and properties of the linear LiH dimer and its isotopomers.     

The complexes of tetramethylresorc[4]arene with amines. Effect of the amine concentration on the complex composition

The complexation of tetramethylresorc[4]arene with primary and secondary amines in acetonitrile was investigated spectrophotometrically. The stoichiometry of the complexes formed was shown to depend on the amine concentration. Based on the proposed complexation models, the formation constants of the complexes as well as their thermodynamical parameters were determined and discussed. Depending on the amine concentration, two types of solid complexes of tetramethylresorc[4]arene with amines were obtained. The composition of these complexes was confirmed by ¹H NMR.     

铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

Diborane (4) derivatives via coupling of amine monobromocyanoboranes: Study of the bromination of amine cyanoborane and molecular structures of the amine dibromocyanoboranes

The first examples of diborane (4) compounds derived from amine cyanoboranes are described. A series of monobromo derivatives of amine cyanoboranes (A:BHBrCN), and dibromo derivatives (A:BBr₂CN), 1-7, were prepared. Lithiation of the monobromo derivative of trimethylamine cyanoborane, using n-BuLi, did not produce the C-lithiated intermediate Li⁺ [CH₂NMe₂BHBrCN]⁻, but instead the B-lithiated intermediate Li⁺ [Me₃NBHCN]⁻, was obtained. This intermediate, when allowed to react for 16 h, coupled with the un-lithiated trimethylamine monobromocyanoborane (Me₃NBHBrCN) and resulted in diborane (4) derivative formation as the 2LiBr complex. The same result was obtained when one equiv of the trimethylamine monobromocyanoborane was added to the reaction mixture 1 h after lithiation. Following the same procedure, novel diborane (4) derivatives of amine cyanoboranes were successfully obtained, 8-11, as their 2LiBr complexes from the monobromo derivatives of the corresponding amine cyanoboranes. Molecular structures of the trimethylamine dibromocyanoborane, 6, and the triethylamine dibromocyanoborane, 7, were determined using X-ray crystallography.     

Neighbouring group participation in formation of condensed azines. Formation of pyrazolo(3,4-b)pyrazines,isoxazolo(4,5-b)pyrazines and isothiazolo(5,4-b)pyridine

Pyrazine- and pyridinecarboxamidoximes with an amino, potentially tautomeric hydroxy or mercapto group inortho position could be transformed in the appropriate condensed azines. In this manner, representatives of pyrazolo(3,4-b)pyrazine, isoxazolo(4,5-b)pyrazine and isothiazolo(5,4-b)pyridine ring system were synthesized and some transformations investigated.Presented in part at the 8th International Congress of Heterocyclic Chemistry, Graz, 1981.     

Paraquat guest induced hydrogen-bonding modes of a hydrazide-derived bis(meta-phenylene)-32-crown-10 host in the solid state

A hydrazide-derived bis(meta-phenylene)-32-crown-10 host showed a dimeric structure via quadruple N-H?O hydrogen bonds, but a polymeric structure via two N-H?O hydrogen bonds and two C-H?O hydrogen bonds at each knot in the presence of paraquat in the solid state, which led to a novel poly(taco complex) and ordering arrangement of the guest molecules indirectly.     

Ruthenium-catalyzed reductive cyclization of nitroarenes with trialkylamines leading to quinolines

Nitroarenes react with trialkylamines in the presence of a catalytic amount of a ruthenium catalyst together with tin(II) chloride dihydrate at 180 °C in an aqueous medium (toluene–H₂O) to afford the corresponding quinolines in moderate to good yields. The catalytic pathway seems to be proceeded via a sequence involving initial reduction of nitroarenes to anilines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heterocyclization.