Storage Stability of LiFePO4/C in Humid‐hot Air

Storage stabilities of LiFePO₄/C composite at different conditions are investigated in terms of structural and electrochemical evolutions. The results from different aging tests indicate that moisture and temperature are the key factors that have the most profound effects on the structure homogeneity which in turn influences the electrochemical performance of LiFePO₄/C. Although the storage in a humid‐hot environment, such as saturated humidity air at 50°C, does not greatly influence the discharging capacity of LiFePO₄/C, it does reduce the initial charging capacity, thus the amount of reversible Li⁺ ions in a practical LiFePO₄/graphite cell decreases. This impact is explained by the lithium extraction during the storage, forming olivine FePO₄ and associated Li₃PO₄. Elevated storage temperature also favors the delithiation process. The degree of delithiation increases from about 6% at 50°C to 18% at 80°C. It is also found that re‐calcination at 650°C effectively resolves the problem of the structural heterogeneity of the stored LiFePO₄/C. Therefore both the initial charging capacity and coulombic efficiency of the stored sample in the first cycle revert to the original value of the fresh one.     

聚硅氧烷热稳定性研究进展

综述了聚硅氧烷的热老化机理、影响其热稳定性的因素和提高其热稳定性的途径。聚硅氧烷的热老化反应主要包括热解聚和热氧化两个反应。氧气、水或醇、酸、碱或残留催化剂、硅油、机械外力、填料、聚硅氧烷的链端基等都会影响聚硅氧烷的热稳定性。提高聚硅氧烷热稳定性的途径主要有改变聚硅氧烷的分子结构以及在体系中添加热稳定剂。     

Enthalpy relaxation in an epoxy-cycloaliphatic amine resin

Enthalpy relaxation in a system containing the diglycidyl ether of bisphenol A (DGEBA) resin and a diamine, 1,3-bisaminomethylcyclohexane (1,3-BAC) as curing agent, has been investigated by differential scanning calorimetry (DSC). Samples fully cured were annealed at temperature T_g–15 °C for periods of time from 1 h to a maximum of 168 h. The enthalpy relaxation is analyzed by the peak shift method, in which the sample is heated at 10 °C/min following cooling at various rates through the glass transition region. The key parameters of structural relaxation determined were the non-linearity parameter x=0.47 ± 0.02, the apparent activation energy Δh*=1264 ± 48 kJ/mol or Δh*/R=152 ± 6 kK and the non-exponentiality parameter β ≈ 0.3. The results, obtained by the same method, were compared with those for other systems based on fully cured DGEBA. The correlations among these parameters with the peak shift model should be considered with caution. However, the results show that a correlation between crosslink lengths and the value of Δh* can be considered. The relaxation process for DGEBA/1,3-BAC proves to be highly cooperative. Received: 28 June 2000 Accepted: 6 September 2000     

Estimation of oxyhydroxide specific surface area using the amounts of OH groups adsorbed

A procedure for pH-metric determination of the limiting adsorption of OH groups (A _OH) by Fe^III, Zr^IV, Cr^III, and In^III oxyhydroxide hydrogels from 0.1 and 1.0 M solutions of NaCl is described. Data on the molecular area occupied by a single OH group on the hydrogel surface (S _OH) and the S _spec values, which were calculated from A _OH and S _OH, are presented. The S _spec value does not depend on the pH of hydrogel precipitation; the true S _spec value can be determined only from sorption of the OH groups at the actual point of zero charge of the hydrogel. The A _OH values for hydrogels were found to change only slightly during aging of hydrogels in electrolyte solutions.     

Comparison of the chromatographic fingerprint,multicomponent quantitation and antioxidant activity of Salvia miltiorrhiza Bge. between sweating and nonsweating

Salvia miltiorrhiza Bge. is a traditional Chinese medicine applied in the treatment of various diseases in clinical practice. In the course of its processing, S. miltiorrhiza Bge. is usually processed by sweating. This study employed 10‐component contents determination coupled with high‐performance liquid chromatography (HPLC) fingerprint and antioxidant activity to investigate the effect of sweating on S. miltiorrhiza Bge. so as to evaluate the quality of S. miltiorrhiza Bge. The HPLC method was performed using C₁₈ and 0.05% phosphoric acid aqueous solution–acetonitrile with a gradient elution system. It was validated for linearity, precision, repeatability, stability and recovery. Similarity analysis, principal components analysis and antioxidant activity assays were used to compare sweated S. miltiorrhiza Bge. (SSM) and nonsweated S. miltiorrhiza Bge. (NSSM). SSM and NSSM showed good similarities in HPLC fingerprint (>0.9), but principal components analysis could classify the HPLC fingerprint and 10‐component quantitation analysis. Meanwhile, the antioxidant activity of SSM was significantly higher than that of NSSM (p < 0.01). The results of this study indicated that sweating could alter the content of chemical constituents in S. miltiorrhiza Bge., and could also improve its antioxidant activity. In addition, the method not only affords a viable strategy for comparing SSM and NSSM and assessing the quality of S. miltiorrhiza Bge., but also provides a reference for other herbal medicine that suffers from sweating.     

Aging effect on the mechanical properties of hybrid gels

Sol-gel derived unsupported films and thin rods have been obtained from co-hydrolysis of triethoxysilane and methyldiethoxysilane. The materials are flexible, dense and transparent. Films and rods have been aged for different periods of time in air at room temperature. The elastic modulus has been measured by means of tensile or flexural tests. Measurements showed an increase of elastic modulus with aging time and showed different values for films and rods. The observed evolution of mechanical properties has been related to a corresponding structural modification as highlighted mainly by MAS-NMR studies. Analyses pointed out the crucial role of condensation processes and showed that the stiffness increase arises from the formation of relatively few bonds which link and constrain pre-existing mobile network regions.     

气相色谱-质谱法对当归及其炮制品挥发油的指纹图谱和潜在标志物研究

建立了一种基于气相色谱-质谱技术(GC-MS)的化学指纹图谱,以发现当归及其不同炮制品潜在标志物的方法.利用GC-MS获得当归及其不同炮制品挥发油化学指纹图谱,对产生的75样本×259变量数据进行归一化、修正80％规则和数据缩放等方法预处理,通过正交校正偏最小二乘法(OPLS)模式识别方法对样品进行模式识别,根据模型的变量重要性因子(VIP)和非参数检验结果筛选出12个潜在标志物.经相关分析和结构鉴定,其中11个化合物分别被鉴定为丁内酯、萜烯醇、6-丁基-1,4环庚二烯、2-壬酮、6-十一烷酮、2-甲氧基苯酚、δ-榄香烯、4,5,6,7-四甲基苯酞、Z-丁烯基酞内酯、亚油酸甲酯、1,7-异丙基-4-甲基-1,4,5,6,7,7a-六氢-2H-茚-2-酮.     

Co-Treatment of Purified Annatto Oil (Bixa orellana L.) and Its Granules (Chronic®) Improves the Blood Lipid Profile and Bone Protective Effects of Testosterone in the Orchiectomy-Induced Osteoporosis in Wistar Rats

This study aimed to evaluate and compare the effects of co-treatment with purified annatto oil (PAO) or its granules (GRA, Chronic^®) with that of testosterone on the orchiectomy-induced osteoporosis in Wistar rats. After surgery, rats were treated from day 7 until day 45 with testosterone only (TES, 7 mg/kg, IM) or TES + PAO or GRA (200 mg/kg, p.o.). The following parameters were evaluated: food/water intake, weight, HDL, LDL, glucose, triglycerides (TG), total cholesterol (TC), alkaline phosphatase levels, blood phosphorus and calcium contents, femur weight, structure (through scanning electron microscopy), and calcium content (through atomic absorption spectrophotometry). Our results show that orchiectomy could significantly change the blood lipid profile and decrease bone integrity parameters. Testosterone reposition alone could improve some endpoints, including LDL, TC, bone weight, and bone calcium concentration. However, other parameters were not significantly improved. Co-treatment with PAO or GRA improved the blood lipid profile and bone integrity more significantly and improved some endpoints not affected by testosterone reposition alone (such as TG levels and trabeculae sizes). The results suggest that co-treatment with annatto products improved the blood lipid profile and the anti-osteoporosis effects of testosterone. Overall, GRA had better results than PAO.     

A Chemical Test for Determining Biological Availability of Aged Chemicals in Soil

Abstract

Aging is one of several processes that are known to affect exposure of chemicals to organisms by decreasing the available fraction of chemical contaminants in soil. This phenomenon has important implications in the assessment of the hazards of chemicals and regulations for soil cleanup. Passive sampling devices (PSDs) are potentially direct chemical indicators for assessing bioavailability of pesticides (and other chemicals). PSDs consist of lipophilic material within a semi-permeable membrane, similar to biological systems. In this study, a pesticide mixture was aged in soil for up to eight months. Earthworms and PSDs were placed in soil and chemical uptake into both was determined over time. Uptake rates into PSDs and maximum concentrations were observed to positively correlate with uptake rates and maximum concentrations in earthworms for both of the soil types studied (sandy loam, silt loam). These results indicate that PSDs may be used as a surrogate for earthworms and provide a chemical technique for assessing the availability of aged chemical residues in soil.