Enthalpy of Adsorption and Isotherms for Adsorption of Naphthenic Acid onto Clays

The enthalpies of adsorption and the isotherms for adsorption of naphthenic acid onto Na-montmorillonite, Na-kaolinite, and Na-illite were studied by means of calorimetry and the static method at 298.15 K. The results show that the enthalpies of adsorption and saturated adsorption amounts of naphthenic acid on different clays change in the order Na-montmorillonite > Na-illite > Na-kaolinite. The interaction between naphthenic acid and clays is discussed.     

New method for calculating the adsorption of noble gases on amorphous surfaces

A new approach to calculating the equilibrium characteristics of the adsorption of noble gases on the amorphous surfaces of adsorbents was developed and applied to the Ar−TiO₂(rutile) system. Intermolecular adsorbate-adsorbate interactions are taken into account for the nearest neighbors in the quasi-chemical approximation. The lattice energy parameters of all interactions of the model are determined from the Lennard-Jones potential (12-6). The formation of amorphous TiO₂(rutile) surface includes completion of the surface layers and partial removal of the surface oxygen ions. The quality of the amorphization procedure was confirmed by the experimentally measured heats and isotherms of adsorption of the system under study. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1109–1118, June, 1997.     

Cr(VI)在Mg-Al型类水滑石上的吸附-脱附性研究I.吸附性

研究了Cr(VI)在带结构正电荷的Mg-Al型类水滑石(HTlc)上的吸附性能,考察了pH、无机电解质添加剂NaCl,NaNO3,Na2SO4和Na3PO4及有机添加剂EDTA和柠檬酸等因素的影响,并结合红外光谱和XRD实验结果探讨了吸附机理.研究表明,Mg-Al型HTlc对Cr(VI)有很强的吸附能力,其吸附动力学和吸附等温线分别符合准二级速率方程和Langmuir方程,饱和吸附量达105mg/g,有望成为一种优良的含Cr(VI)污水处理剂和Cr(VI)污染土壤修复剂.初始pH增大,吸附量降低.无机电解质和有机添加剂均能明显抑制Cr(VI)在HTlc上的吸附,其抑制吸附作用的强弱顺序分别为Na3PO4≥Na2SO4≥NaCl>>NaNO3和柠檬酸>EDTA.Cr(VI)在HTlc上的吸附可分为层间的离子交换吸附和外表面的吸附,其中外表面的吸附层在微观上又可分为因化学键合作用而形成的内络合层和因静电作用而形成的外络合层.     

Prediction of adsorption of organic component and water vapour mixture onto activated carbon

A simple isotherm equation is derived for the adsorption of an organic component onto activated carbon in presence of water vapour. The theoretical results are compared with experimental data for toluene-water vapour-activated carbon, which were published byRipperger andGermerdonk [10].

---

Vorhersage der Adsorption einer organischen Komponente und Wasserdampf an Aktivkohle

Zusammenfassung Es wird eine einfache Adsorptionsisotherme abgeleitet, welche die gleichzeitige Adsorption eines organischen Stoffes und Wasser an Aktivkohle beschreibt. Die theoretischen Ergebnisse werden mit experimentellen Resultaten vonRipperger undGermerdonk [10] für Toluol-Wasser-Aktivkohle verglichen.

---

Symbols a _i adsorbate concentration in adsorbent, kg/kg of carbon - a _0i monolayer capacity, kg/kg of carbon - b _i kinetic parameter of theLangmuir equation - E _j adsorption energy in thej-th layer - i i-th component (1 — water vapour, 2 — organic compound) - j j-th layer - m number of layers - n number of adsorbed components - p partial pressure, Pa - p* saturation partial pressure, Pa - p _C water vapour partial pressure at begining of capillary condensation, Pa - surface coverage     

MSINDO study of water adsorption on NiO surfaces

The dissociation of water adsorbed on the surface of NiO was investigated by using the semi-empirical SCF MO method MSINDO. Simulations were based on embedded cluster models representing the (100) surface, with and without a monatomic step. The angle formed between the metal adsorption site and the O–H bond associated with water has been found to be critical to the energetics of the dissociation process. Based on this criterion, it was shown that water dissociation is favorable on the stepped surface, but highly unlikely on the planar surface. In addition, the activation energy required for water dissociation in a monatomic NiO step was considerably lower than for dissociation at the planar surface. The high activation energy associated with water dissociation on the planar surface is attributed to the rigidity of the NiO lattice. Dedicated to Prof. K. Jug in honor of his 65th birthday     

Influence of particle diameter distribution on protein recovery in the expanded bed adsorption process

The General Rate model has been developed and solved to describe protein adsorption in an expanded bed. The model takes into account axial and local variation of particle size distribution (PSD), external and intra-particle mass transfer resistances, and dispersion in liquid phase. The influence of PSD on breakthrough profiles has been analysed. The simulation results show that for a significantly high expanded bed the lower part of the breakthrough curve profiles, calculated for local particle size distribution (LPSD) and for axial average particle size distribution (APSD) are very similar. However, the upper part of breakthrough profiles calculated for LPSD approaches inlet concentration much more slowly than those calculated for APSD. The retention times of the lower part of uptake curves calculated with average particle diameter are constantly shorter than those obtained from LPSD. For the calculation of the dynamic capacity (DC), the LPSD can be replaced by APSD for large expanded bed heights. Using breakthrough profiles calculated for average particle size, DC values are constantly underestimated.     

Dependence of Elution Curve and Adsorption Isotherms of Insulin on composition of Mobile Phase of Frontal Analysis in Reversed Phase Liquid Chromatography

With frontal analysis(FA),the dependence of adsorption isotherms of insulin on the composition of mobile phase in reversed phase liquid chromatography (RPLC) has been investigated,This is also a good example to employ the stoichiometric displacement theory (SDT) for ivestigating solute adsorption in physical chemistry.Six kinds of mobile phase in RPLC were employed to study the effects on the elution curves and adsorption isotherms of insulin.the key points of this paper are:(1) the stability of insulin due to delay time after preparing,the organic solvent concentration,the kind and the concentration of ion-pairing agent in mobile phase were found to affect both elution curve and adsorption isotherm very seriously.(2)To obtain a valid and comparable result,the composition of the mobile phase employed in FA must be as same as possible to that in usual RPLC of either analytical scale or preparative purpose.(3)Langmuir Equation and the SDT were employed to imitate these obtained adsorption isotherms.The expression for solute adsorption from solution of the SDT was found to have a better elucidation to the insulin adsorption from mobile phase in RPLC.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

Kinetics of underpotential deposition and nucleation of copper on the Pt(111) face in the presence of acetonitrile

The kinetics of underpotential deposition, three-dimensional nucleation, and growth of copper deposits at cathodic overpotentials on a Pt(111) electrode in solutions containing 0.5 M H₂SO₄, 10 mM CuSO₄, and 0–200 mM acetonitrile (AcN) is studied by the cyclic voltammetry, potentiostatic current transients, and scanning probe microscopy methods. At low volume concentrations of acetonitrile ([AcN] ≤ 4 mM), adsorbed acetonitrile molecules accelerate the formation of a co-adsorption lattice of copper adatoms with anions due to local electrostatic effects at the charged interface. At higher concentrations, the underpotential deposition process is hampered, but the desorption of copper adatoms occurs at potentials more positive than those at low acetonitrile concentrations. This effect is attributed to a stabilizing action of acetonitrile molecules situated on the layer of copper adatoms and, in part, on platinum. At [AcN] = 0.4–40 mM, adsorbed acetonitrile molecules accelerate the growth of the bulk copper deposit, but the nucleation stage is hindered. The dependence of the copper amount on the deposition potential at [AcN] = 40 mM exhibits a maximum at 0.15–0.17 V. This effect was previously observed in weakly acid solutions (pH 1.7–3.0) containing no acetonitrile. The maximum rate of the deposit growth corresponds to an optimum number of crystallites (which is not too great) and an optimum distance between the growing centers in conditions of mixed kinetics “diffusion + electron transfer.” A substantial number of complexes Cu(I)-AcN forms at high acetonitrile concentrations.     

Adsorption of the fluoride ion on the surface of various faces of a single crystal of silver: a quantum-chemical study

The fluoride ion adsorption from a gas phase on various faces of a single crystal of silver is studied by a density functional method within a cluster model for metal. The adsorption bond energy is found to increase in the series Ag(100) < Ag(111) < Ag(311) < Ag(110). A substantial structural and energetic heterogeneity of various adsorption sites is revealed. The results are utilized to simulate the electrochemical interface between individual faces of a single crystal of silver and aqueous solutions containing the fluoride ion. It is assumed that the adsorption potential may be represented as the sum of two contributions, one of which describes the metal–ion interaction and the other, the ion solvation energy. The plotted adsorption terms take into account partial degradation of the fluoride ion when adsorbed from an aqueous solution. Estimates of discreteness of the electrical double layer are presented. A conclusion on the maximum manifestation of specific adsorption of the fluoride ion for the Ag(100) face is made.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 232–238.Original Russian Text Copyright © 2005 by Nazmutdinov, Zinkicheva.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.