Lipophilic counterion effect on aggregation and adsorption behavior of quaternary ammonium surfactants

The obvious different aggregation and adsorption behavior of six newly quaternary ammonium surfactants with different lipophilic counterions has been discoverd by measurements of equilibrium and dynamic surface tension, fluorescence and conductivity. Interestingly, the critical micelle concentration (CMC) and its surface tension γ_CMC decrease with the increasing counterion chain length. However, three methods have confirmed that an exception of CMC increases slightly from C₁₆NC₁ to C₁₆NC₂. According to experimental results, a balanced mechanism between hydrophobicity and electrostatic of counterion is proposed. Besides, the dynamic surface tension results show the diffusion coefficient increases with the increasing counterion length both at a short time (D_t?→?0) and long time (D_t?→?∞), which indicates a faster adsorption process. Unlike the inorganic counterion, the diffusion coefficient decreases with the increase of hydrophobic chain length. This is attributed to the strong electrostatic interactions between counterions and cationic headgroups.     

An adsorption study of Sr2+ from saline sources by coconut shell charcoal

The adsorption potential of charcoal for the removal of heavy metal ions is well documented in the literature. However, its exploration for uptake of technologically valuable metal ions such as Sr²⁺ is poorly known. In this work, the batch adsorption study of Sr²⁺ ion from aqueous solution as well as from saline matrix (>3% of NaCl) onto charcoal has been carried out. The experiments were conducted with two charcoals, i.e., our prepared charcoal (coconut shell charcoal) and commercial charcoal. Strontium adsorption has been investigated as a function of its initial concentration, contact time, and varied mass of adsorbent. Equilibrium adsorption data were evaluated for Langmuir and Freundlich isotherm models. The adsorption capacities (mg/g) of Sr²⁺ present in the salt matrix onto coconut shell charcoal and commercial charcoal was found to be 18.4 and 22.2, respectively. Uptake of Sr²⁺ from subsoil brine onto coconut shell charcoal has been successfully demonstrated in this work.     

Kinetic and equilibrium studies of urea adsorption onto activated carbon: Adsorption mechanism

We found that activated carbon effectively removed urea from solution and that urea adsorption onto activated carbon followed a pseudo-second-order kinetic model. We classified the urea adsorption on activated carbon as physical adsorption and found that it was best described by the Halsey adsorption isotherm, suggesting that the multilayer adsorption of urea molecules on the adsorption sites of activated carbon best characterized the adsorption system. The mechanism of adsorption of urea by activated carbon involved two steps. First, an amino (–NH₂) group of urea interacted with a carbonyl (–C?O) group and a hydroxyl (?OH) group on the surface of activated carbon via dipole–dipole interactions. Next, the –C?O group of the urea molecule adsorbed to the activated carbon interacted with another –NH₂ group from a second urea molecule, leading to multilayer adsorption.     

Ce-Co/KIT-6介孔材料的制备及其脱汞性能的研究

以P123表面活性剂为模板,采用硬模板法制备了有序介孔材料KIT-6,以KIT-6为载体,Ce(NO_3)_2·6H_2O和Co(NO_3)_2·6H_2O为Ce和Co源,采用溶液浸渍法制备了负载型Ce-Co/KIT-6介孔材料。在模拟烟气条件下,利用固定床实验台架研究了Ce-Co/KIT-6材料对烟气中的单质汞(Hg0)的脱除性能。采用扫描电镜(SEM)、N_2吸附-脱附(BET)、X射线衍射分析(XRD)、傅里叶红外光谱分析(FT-IR)、氢气程序升温还原(H_2-TPR)以及热重分析(TGA)等方法对材料进行表征。结果表明,Ce和Co在KIT-6孔道内部高度分散,同时材料保持高度有序的孔道结构、比表面积高达495.2 m~2/g,孔径4.6 nm。脱汞实验结果表明,Ce-Co/KIT-6对Hg0的氧化吸附去除效率很高,250℃下对Hg0的氧化吸附去除效率高达95%以上,在这个过程中,O_2的存在明显促进了催化剂的脱汞能力。氧通过Ce-Co价态的变化进入金属结构中,再与汞发生反应是这个过程的主要机理。     

改性Y型分子筛对硫醇硫醚的吸附脱除研究

通过液相离子交换法制备了Cu(I)Y、Ni Y、Ce Y分子筛,以XRD、低温N2吸附-脱附、NH3-TPD、吡啶红外Py-FTIR等方法对其进行物性表征。利用固定床技术、WK-2D微库伦仪及硫化学发光检测GC-SCD色谱评价了改性分子筛对于硫含量300μg/g模拟油(含硫化合物二丙硫醚、环己硫醇和1-庚硫醇与壬烷配制)及HDS汽油的吸附脱硫性能。结果表明,吸附剂对模拟油和HDS燃料油品中硫醇硫醚具有吸附效果,且改性后的分子筛在吸附脱硫过程中,强的B酸对于吸附脱硫有负作用,会使油品中硫醇硫醚发生催化反应,聚合的大分子硫化物遮盖及阻塞吸附活性位点,从而使吸附剂不能够完全地吸附硫化物,造成吸附硫容较小,而弱L酸无催化活性对吸附脱硫有正面影响。     

硫氰根选择性吸附在g-C_3N_4/Ag表面增强其光催化制氢性能(英文)

作为一种无金属的新型半导体材料,g-C_3N_4因具有稳定的物理化学性质及合适的能带结构而引起人们的关注.理论上g-C_3N_4完全满足水分解的电势条件.然而研究发现,g-C_3N_4材料本身的光催化性能并不好,这主要是由于半导体材料被光激发后生成的自由电子和空穴还没来得及到达材料表面参与反应,就在材料体相内发生复合,导致电子参与有效光催化制氢反应的几率大大降低.同时还发现,将少量的贵金属,如Pt,Au,Pd作助催化剂修饰在该半导体表面,其光催化性能明显提高.但由于这些贵金属储量非常稀少,价格昂贵,导致它们的使用受到一定限制.而Ag作为一种价格远低于Pt,Au,Pd的贵金属,也得到了广泛的研究.研究表明,金属Ag储存电子的能力很好,因此可以有效地将半导体上生成的光生电子快速转移到Ag上面去,从而达到电子空穴快速分离的目的.但是在光催化制氢过程中,Ag吸附H~+的能力较弱,致使电子与H~+反应的诱导力较弱,使得Ag释放电子的能力较差.因此可以通过提高Ag表面对H~+的吸附强度,以加速Ag的电子释放,通过表面修饰来提高Ag助剂的光催化活性.研究发现,Ag纳米粒子表面与含硫化合物之间存在很强的亲和力.硫氰根离子(SCN~–)具有很强的电负性,容易吸附溶液中H~+离子,并且也易吸附在Ag纳米粒子的表面.因此可以利用Ag与SCN~–的作用来增强Ag释放电子的能力.本文采用光还原法将Ag沉积在g-C_3N_4半导体材料表面,然后通过在制氢牺牲剂中加入KSCN溶液,利用SCN~-与Ag的亲和力来提高光生电子参与光催化反应的效率.结果表明,在SCN~-存在的情况下,g-C_3N_4/Ag的光催化制氢性能显著提高.当制氢溶液中SCN~–浓度为0.3 mmol L~(–1)时,材料的光催化制氢性能达最大,为3.89μmol h~(–1),比g-C_3N_4/Ag性能提高5.5倍.基于少量的SCN~–就能明显提高g-C_3N_4/Ag材料的光催化性能,我们提出了一个可能性的作用机理:金属银和SCN~-协同作用,即银纳米粒子作为光生电子的捕获和传输的一种有效的电子传递介质,而选择性吸附在银表面的SCN~-作为界面活性位点有效地吸附溶液中的质子以促进产氢反应,二者协同作用,加速了g-C_3N_4-Ag–SCN~-三物种界面之间电荷的传输、分离及界面催化反应速率,有效抑制了g-C_3N_4主体材料光生电子和空穴的复合,因而g-C_3N_4/Ag–SCN复合材料的光催化制氢性能提高.考虑到其成本低、效率高,SCN~–助催化剂有很大的潜力广泛应用于制备高性能的银修饰光催化材料.     

Director configurations in nematic droplets with tilted surface anchoring

The polymer dispersed nematic liquid crystal (LC) with the tilted surface anchoring has been studied. The droplet orientational structures with two point surface defects – boojums and the surface ring defect – are formed within the films. The director tilt angle α = 40° ± 4° at the droplet interface and LC surface anchoring strength W_s ~ 10^–6 (J m^?2) have been estimated. The bipolar axes within the studied droplets of oblate ellipsoidal form can be randomly oriented are oriented randomly relatively to the ellipsoid axes as opposed to the droplets with homeotropic and tangential anchoring.     

用有限解析差分格式数值求解化学输运方程

本文用有限解析差分格式研究在多孔介质中化学输运问题的数值模型,系统地计算结果表明:1.有限解析差分格式能够消除数值弥散和伪振荡; 2.随着弥散数(Peclct数)的减小(增加),浓度突破曲线将延迟到达和形状变陡,最终趋近浓度对流曲线;3.当流速数增加后,非稳态吸附对浓度分布的影响趋近稳态吸附的影响。     

Special and extreme triple shock-wave configurations

Triple shock-wave configurations in steady supersonic flows of an inviscid perfect gas are considered. Triple configurations with special intensities of shock waves and extreme ratios of various flow parameters behind these configurations are determined. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 4, pp. 39–53, July–August, 2006.