Synthesis,characterization and properties of methylaminocellulose

Homogeneously prepared tosylcelluloses (TC) with degrees of substitution (DS) of DS_Tos 0.1–1.8 were used as intermediates for the synthesis of methylaminocelluloses (MAC) by nucleophilic substitution with methylamine. TC with DS_Tos up to 1.1 were shown to be valuable intermediates for selective synthesis of MAC with DS_MA varying from 0.1 to approximately 1. No nucleophilic substitution was observed at higher DS_Tos. At the chosen reaction conditions (60 °C, 48 h) residual tosyl moieties remained unchanged and little hydrolysis took place. The samples obtained were characterized by means of elemental analysis, FTIR and ¹³C CP/MAS NMR spectroscopy. ¹³C CP/MAS NMR spectroscopy was found to be an efficient tool for quantification of DS_MA. Furthermore, the swelling behaviour in water was investigated and preliminary tests concerning the bilirubin adsorption capacity of MAC were carried out.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

吸附溶出伏安法测定毗喳酮的研究

本文报道了用吸附溶出伏安法测定毗喳酮.以悬汞电极为工作电极，在Na}B,O,-NaOH介质(pH=10)中，毗喳酮产生一尖锐的吸附还原峰,E，二一1. 29V (vs. SCE )，峰电流与毗喳酮浓度在2. 0 X 10-'-8. 0 X 10-smol " L-’范围内呈良好的线性关系.检测限为2. 0 X 10-0mol " L-'(富集90s).本文对毗喳酮在悬汞电极上的电化学行为进行了探讨，对测定毗喳酮的最佳条件进行了详细的选择，利用本法测定了片剂中毗喳酮含量，结果满意.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Enzymes immobilized on montmorillonite: comparison of performance in batch and packed-bed reactors

Summary The enzymes a-amylase, invertase and glucoamylase were immobilized on acid activated montmorillonite using two techniques, viz. adsorption and covalent binding, and their activities were tested in a batch and packed-bed reactor and were compared. The packed-bed reactor showed an improved performance for all immobilized enzymes, which was attributed to lowering of diffusional restrictions to mass transfer. Lower activity in case of batch reactor for immobilized invertase was due to a combined effect of loss of native conformation of enzyme on account of immobilization and mass transfer resistances due to improper diffusion of substrate to the active site of enzyme. For immobilized glucoamylase, the packed-bed reactor demonstrated exceptionally high activity that was very close to the free enzyme. Covalently bound glucoamylase showed higher activity than the free enzyme.     

武器系统生存能力模型分析

对抗过程中，武器系统的生存概率包括以下的四个方面，即：被发现的可能性、被命中的可能性、易毁性和可修理性。武器系统生存能力的动态描述主要划分为四个阶段：被发现阶段、被命中阶段、被毁伤和修复阶段。本文从这四个阶段给出了对抗过程中武器系统生存能力的动态描述，并分析了各个阶段的计算模型。     

因子分析在企业竞争力评价中的应用

根据因子分析原理,建立了企业竞争力的规模因子、效益因子和成长因子得分模型。通过现实竞争力和潜在竞争力分析,实现了企业竞争力和可持续发展的评价。     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Enthalpies of sorption of linear hydrocarbons (C2–C8) and chloroderivatives of methane and ethylene on the surface of hydrotalcite

Differential molar adsorption enthalpies (DMAE) were determined by gas chromatographic measurements of specific retention volume of vapors on the surface of two forms of Mg–Al hydrotalcite. A linear dependence of the DMAE on the number of the carbon atoms in hydrocarbons was observed for both form of hydrotalcite. The dependence of the differential molar adsorption enthalpies on the number of chlorine atoms in organic molecules is discussed. A linear dependence of DMAE on the molecular weight of chloroderivatives of methane and ethylene on the basic form in an order monochloromethane < dichloromethane < trichloromethane or vinylidene chloride < 1,1-dichloroethylene < trichloroethylene was found.