Isothermal titration calorimetric studies of surfactant interactions with negatively charged, ‘hairy’ latex nanoparticles

Isothermal titration calorimetry (ITC) measurements of the mixture of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) with negatively charged, hairy copolymer latices (poly-(2,3-epoxypropylmethacrylate-co-methacrylic acid) in different ratio) at high water excess indicate a monomer adsorption mechanism of CTAB by the polymer particles. The number of adsorbed CTAB molecules at saturation corresponds approximately to the number of negative elementary charges bound at the surface of the latices. The mixing enthalpy is the sum of demicellization and sorption enthalpies. At 25 °C for CTAB the demicellization enthalpy amounts to 10 kJ/mol, whereas the adsorption enthalpy varies from –7 kJ/mol (surface charge density of the latices =–0.37 C/m²) to +3 kJ/mol (=–0.085 C/m²). The hydrodynamic radius R_H of the latex particles upon titration of cationic detergent and salt (NaBr) decreases by about 2 nm until the onset of aggregation near the isoelectric point. Titration of nonionic or anionic detergents has much less influence on the hydrodynamic radius and produces no measurable adsorption heat. The results are consistent within a model of latex particles with extended negatively charged polymer chains interacting predominantly via Coulombic forces with detergents.     

Calorimetric and Thermal Investigation of Metal Derivatives of 6-aminopicolinic Acid

The comparison of thermal and calorimetric properties of metal derivatives of 6-aminopicolinic acid (APH) is presented. The salts and complexes of APH with Cr(III), Cd(II), Cu(II), Ni(II), Pb(II), Co(II)and Ag(I) have been studied by TG-DTA and DSC methods up to 1200°C in a nitrogen atmosphere. Decomposition processes are proposed. The decarboxylation, deamination and carbonation of the organic fragments of molecules take place. The compounds decompose to metal or to metal oxides. The values of the transition enthalpy were determinated. This revised version was published online in August 2006 with corrections to the Cover Date.     

硅胶键联MPc的制备及其在氧活化中的作用

过渡金属酞等配合物（MPC）用手均相液相氧化中作催化剂已有不少报导，象许多均相催化剂一样，MPC用于均相反应存在着难于从反应体系中分离出来的问题．把均相配合物催化剂固载在无机氧化物如硅股或有机高分子载体上是解决这一问题的一种方法．我们曾尝试把MP。固载在分子筛载体和硅胶载体上，并用ESR研究其对O2的活化作用[1，2]．本文报导MPc通过共价键键联固载在SiO2上，并研究其对O2的活化作用．1实验部分1．1试剂HSIC13为日本东京化成株式会社产品，二级试剂·发烟硫酸（SO。质量分数大于20％）为分析纯试剂．PCl5为化学纯试…     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Theoretical prediction of the contact distance dependence of the electron transfer reactivity of the ClO/ClO− coupling system

On the basis of the structures and properties of the ClO/ClO^? system obtained at the density functional theory (DFT) (UB3LYP) level, employing the 6‐311+G(3df) standard basis set, the electron transfer reactivity of this system is investigated. The results indicate that there are five possible stable coupling complexes that correspond to the generous minima on the global potential energy surfaces (PES). The most stable coupling complex is planar EC4, in which there is a O? O linkage with two trans‐Cl atoms. Their stabilization energies are calculated to be 20.57 (EC1: C₁), 20.54 (EC2: C₂, ²B), 20.69 (EC3: C₁), 20.70 (EC4: C_s, ²A′), and 20.69 (EC.5: C_2h, ²B_u) kcal/mol at the B3LYP/6‐311+G(3df) level; with the correction of the basis set superposition error (BSSE), the stability order of these encounter complexes is EC4 > EC.5 > EC3 > EC1 > EC2. Based on the five encounter complexes, five coupling modes are designed for the study of the electron transfer reactivity of this system. The dissociation energy curves at the activated states and the corresponding activation energies of these five coupling modes are obtained and are compared at the B3LYP/6‐311+G(3df) and MP2/6‐311+G* levels. The inapplicability of DFT methods has also been discussed in this article in predicting the energy curves, especially with a long contact distance, in which DFT methods give the abnormal behavior for the dissociations of the complexes caused by the “inverse symmetry breaking” problem. On the basis of the golden rule of the time‐dependent perturbation theory, the electron transfer reactivity and the contact distance dependence of the various electron transfer kinetics parameters (e.g., activation energy, coupling matrix element) have been analyzed at the UMP2(full)/6‐311+G* level. The electron transfer can take place over a range of contact distances, but the most effective coupling distance corresponds to only a small range. The coupling orientation analyses also indicate that the most favorable coupling mode to the electron transfer does not always correspond to the most stable encounter complex mechanism. Some highly energetic coupling modes are more favorable for the electron transfer. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

The thermodynamics of proton dissociation of adenine

The thermodynamic quantities associated with ionization of the N₁ and N₉ protons of adenine have been calorimetrically determined as a function of temperature. The H values for proton dissociation of these groups, with pK values of 4.19 and 9.92, were found to be 5.1 and 9.1 kcal/mole, respectively, at 25°C, =0.025. The C _p values for proton dissociation of these groups were estimated to be –11 and –17 cal/mole-deg. These results indicate that the large heat capacity changes observed during conformational transitions of polynucleotides are not the result of ionization of the bases.     

Heating rate effect on the DSC kinetics of oil shales

This research was aimed to investigate the combustion and kinetics of oil shale samples (Mengen and Himmetoğlu) by differential scanning calorimetry (DSC). Experiments were performed in air atmosphere up to 600°C at five different heating rates. The DSC curves clearly demonstrate distinct reaction regions in the oil shale samples studied. Reaction intervals, peak and burn-out temperatures of the oil shale samples are also determined. Arrhenius kinetic method was used to analyze the DSC data and it was observed that the activation energies of the samples are varied in the range of 22.4–127.3 kJ mol⁻¹ depending on the oil shale type and heating rate.     

Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.     

H2CCF自由基与HNCO反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋＋G(d,p)基组水平上研究了H₂CCF自由基与HNCO的微观反应机理, 优化了反应过程中的反应物、中间体、过渡态和产物, 为了获得更精确的能量信息, 还在QCISD(T)/6-311＋＋G(d,p)基组水平上计算了各物质的能量．振动分析结果和IRC分析结果证实了中间体和过渡态的真实性, 计算所得的成键临界点电荷密度的变化也确认了反应过程．对于H₂CCF自由基与HNCO反应, 我们找到了六条可行的反应通道, 结果分析表明通道H₂CCF＋HNCO→IM3→TS5→H₂CCFH＋NCO控制步骤活化能最低, 是该反应的主要通道, 在此反应过程中有稳定的氢键复合物IM3生成, 还表现出氢原子迁移的反应特征．