DIHALOCARBENE ADDITION TO ARYLSUBSTTTUTED VINYL PHOSPHATES UNDER PHASE TRANSFER CATALYTIC CONDITIONS

Abstract

Dihalocarbene addition to aryl-substituted vinyl phosphates was carried out both in solid-liquid and in liquid-liquid two phase systems. The dihalocyclopropane adducts of vinyl phosphates could be obtained in better yield using dihalocarbenes generated by the latter method and no hydrolysis of the vinyl phosphate and of the adduct occurred under these circumstances. Eighteen new vinyl phosphate-dihalocarbene adducts were synthetized and characterized.     

Promotion effect of adsorbed water/OH on the catalytic performance of Ag/activated carbon catalysts for CO preferential oxidation in excess H2

Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H₂ was evaluated. Ag/AC catalysts, after reduction in H₂ at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H₂ at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H₂00 treatment displayed similar PROX of CO reaction properties to Ag/SiO₂. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.     

Novel Cyanoketene N,S‐Acetals and Pyrazole Derivatives using Potassium 2‐Cyanoethylene‐1‐thiolates

Novel ketene N,S‐acetals 3 were readily prepared by the reaction of cyanoacetamide or cyanothioacetamide with phenylisothiocyanate in the presence of potassium hydroxide, followed by alkylation of the produced salts with methyl iodide. The reaction of compounds 3 with hydrazines afforded different substituted pyrazoles 6.     

Synthesis and Crystal Structure of a B-H Activated Compound Containing a Furan Ring and an ortho-Carborane Cage

A new compound [CpCo（Se2C2BIoH9）CH2C（O）C4H30] has been synthesized and characterized by elemental analysis, IR spectroscopy, NMR, MS and single-crystal X-ray diffraction. The complex crystallizes in the monoclinic system, space group P21/c with a = 10.9481（10）, b = 24.6600（12）, c = 25.7430（14） A, β = 100.863（3）°, C42H57B30Co306Se6＂CH2C12＂0.25H20, Mr = 1722.16, V = 6825.6（8） A3, Dc= 1.676 g/cm3, Z = 1 and F（000） = 3346. The molecular structure shows a 1：1 ratio product of the two reactants of 16e half-sandwich complex CpCo（Se2C2B10H10） and alkyne 1-（2-furyl）-2-propyn-l-one. The hydrogen atom in the B（3） position of CpCo（Se2C2B10HIo） has been activated and migrated to the terminal carbon of 1-（2-furyl）- 2-propyn-l-one to form the B-CH2 unit. The title compound molecules are linked and extended further into a one-dimensional chain through atypical hydrogen bonds.     

Conversion of biomass residual to acid-modified bio-chars for efficient adsorption of organic pollutants from industrial phosphoric acid: an experimental,kinetic and thermodynamic study

ABSTRACT

This study reports the removal of organic matters from phosphoric acid using waste-produced bio-charcoal structures. Particularly, the freshly made bio-char species via pyrolysis and two sub-driven acids activated charcoals were applied during the removal process. The treated charcoal with hydrochloric and nitric acids had attained a higher adsorption rate for organic matters than that of the non-treated one. Removal percentages of 70% and 60% were, respectively, attained by acid-modified chars. The kinetics of the adsorption process was fitted via pseudo-first/second-order and Morris–Weber models. The thermodynamic parameters of the presented sorption process indicate that organic matter removal has been endothermic, physical and spontaneous.     

Facile hydrothermal synthesis of zinc sulfide nanowires for high-performance asymmetric supercapacitor

A facile, single-step hydrothermal route is followed to prepare ZnS nanowires with large aspect ratios. The obtained ZnS nanowires deposited on nickel foam (ZnS/Ni-foam) exhibit a specific capacitance of 781 F/g at a current density of 0.5 A/g. An asymmetric supercapacitor fabricated from ZnS/Ni-foam as a positive electrode and jute derived activated carbon coated on Ni-foam (JAC/Ni-foam) as a negative electrode attains a high specific capacitance of 573 F/g at a current density of 0.5 A/g, with an accompanying high energy density of 51 Wh/kg at a power density of 200 W/kg in an extensive operating potential window of 1.2 V. In addition, the ZnS//JAC asymmetric supercapacitor reveals long-term cyclic stability, after 10,000 GCD cycles the device sustain around ～87 % of the initial specific capacitance. These results shed enlighten a new opportunity for promising electrode materials in supercapacitors.     

基于氮掺杂活性炭催化氧化合成氮甲基氧化吗啉的研究

以三聚氰胺为氮源,商用活性炭为研究对象,通过“浸渍吸附+高温热处理”的方式制得系列氮掺杂活性炭,并用于催化氧化合成氮甲基氧化吗啉（NMMO）。采用N₂吸附/脱附、Raman、XPS等对氮掺杂活性炭的孔结构和表面性质进行了表征。结果表明：随着三聚氰胺负载量的增大,氮掺杂活性炭的表面碱性含氮官能团含量增大,进而体现出更好的催化氧化合成NMMO活性。最佳催化剂（ACO850-20N）在催化剂加量为0.02 wt%,反应温度70 ℃和反应时间4 h的工艺条件下,氮甲基吗啉的转化率和NMMO收率可达99.76%和94.31%。      

The Protection of Lactic Acid Bacteria Fermented-Mango Peel against Neuronal Damage Induced by Amyloid-Beta

Mango peels are usually discarded as waste; however, they contain phytochemicals and could provide functional properties to food and promote human health. This study aimed to determine the optimal lactic acid bacteria for fermentation of mango peel and evaluate the effect of mango peel on neuronal protection in Neuron-2A cells against amyloid beta (Aβ) treatment (50 μM). Mango peel can be fermented by different lactic acid bacteria species. Lactobacillus acidophilus (BCRC14079)-fermented mango peel produced the highest concentration of lactic acid bacteria (exceeding 10⁸ CFU/mL). Mango peel and fermented mango peel extracts upregulated brain-derived neurotrophic factor (BDNF) expression for 1.74-fold in Neuron-2A cells. Furthermore, mango peel fermented products attenuated oxidative stress in Aβ-treated neural cells by 27%. Extracts of L. acidophilus (BCRC14079)-fermented mango peel treatment decreased Aβ accumulation and attenuated the increase of subG1 caused by Aβ induction in Neuron-2A cells. In conclusion, L. acidophilus (BCRC14079)-fermented mango peel acts as a novel neuronal protective product by inhibiting oxidative stress and increasing BDNF expression in neural cells.     

Physiological and Immunological Changes Associated with Oral Microbiota When Using a Thermoplastic Retainer

Background: The study examined the oral microbiota, physiological and immunological changes in patients using thermoplastic retainers during three months of use. Methods: The study included several steps. Firstly, 10 swabs were collected from the buccal and palatal surfaces of the teeth of the patients, approximately 2 mL of saliva was collected from the same patients and 2 mL of saliva was collected from 10 healthy people to measure the pH and secretory IgA level. This was followed by the isolation and identfication of the bacterial isolates in the patient samples. Then, isolate susceptibility toward chlorhexidine (CHX) and their adhesion ability to thermoplastic retainer surfaces was measured. In addition to that the study estimated the numbers of Lactobacillus and Streptooccus mutans colonies during three months and finally, a comparsion of pH acidity and IgA level between the patients and healthy people was performed. The results showed the predominant bacteria during the three months were Lactobacillus spp. and Streptococcus spp. followed by different rates of other bacteria. Raoultella ornithinolytica showed more resistance to CHX while Lactobacillus spp. showed more sensitivity. Streptococcus mutans colony levels were higher than Lactobacillus spp. colonies during the three months, also S. mutans had the highest value in adherence to retainer thermoplastic. Finally, pH acidity showed a highly significant difference (p ≤ 0.05) in the third month, like IgA levels (p ≤ 0.05). Conclusions: According to the results obtained from the current study, the researchers noted that the thermoplastic retainers helped change the oral cavity environment.     

A New Approach for Controlling Mesoporosity in Activated Carbon by the Consecutive Process of Air Oxidation,Thermal Destruction of Surface Functional Groups,and Carbon Activation (the OTA Method)

A new and simple method, based entirely on a physical approach, was proposed to produce activated carbon from longan fruit seed with controlled mesoporosity. This method, referred to as the OTA, consisted of three consecutive steps of (1) air oxidation of initial microporous activated carbon of about 30% char burn-off to introduce oxygen surface functional groups, (2) the thermal destruction of the functional groups by heating the oxidized carbon in a nitrogen atmosphere at a high temperature to increase the surface reactivity due to increased surface defects by bond disruption, and (3) the final reactivation of the resulting carbon in carbon dioxide. The formation of mesopores was achieved through the enlargement of the original micropores after heat treatment via the CO₂ gasification, and at the same time new micropores were also produced, resulting in a larger increase in the percentage of mesopore volume and the total specific surface area, in comparison with the production of activated carbon by the conventional two-step activation method using the same activation time and temperature. For the activation temperatures of 850 and 900 °C and the activation time of up to 240 min, it was found that the porous properties of activated carbon increased with the increase in activation time and temperature for both preparation methods. A maximum volume of mesopores of 0.474 cm³/g, which accounts for 44.1% of the total pore volume, and a maximum BET surface area of 1773 m²/g was achieved using three cycles of the OTA method at the activation temperature of 850 °C and 60 min activation time for each preparation cycle. The two-step activation method yielded activated carbon with a maximum mesopore volume of 0.270 cm³/g (33.0% of total pore volume) and surface area of 1499 m²/g when the activation temperature of 900 °C and a comparable activation time of 240 min were employed. Production of activated carbon by the OTA method is superior to the two-step activation method for better and more precise control of mesopore development.