Synthesis, conformation and PKC isozyme surrogate binding of indolinelactam-Vs, new conformationally restricted analogues of (−)-indolactam-V

New conformationally restricted analogues of tumor promoter (−)-indolactam-V (1), indolinelactam-Vs (8, 11) and their hexyl derivatives at position 1 or 7 (9, 10, 12, 13), were synthesized from 1. (3R)-Indolinelactam-V (8) adopted a conformation similar to the twist form of 1 with a cis amide, while the conformation of (3S)-indolinelactam-V (11) was close to that of the sofa form of 1 with a trans amide. 7-Hexyl derivatives of 8 and 11 (10, 13) showed binding affinities for C1 domains of protein kinase C (PKC) isozymes compared to 1, but exhibited little selectivity among these PKC isozymes. However, introduction of the hexyl group at position 1 of 8 and 11 significantly enhanced their binding selectivity for novel PKC isozymes. The best selectivity for novel PKC isozymes was observed in (3S)-1-hexylindolinelactam-V (12) with a sofa-like conformation. These results suggest that a sofa-restricted analogue of 1 with a hydrophobic chain at an appropriate position would be a promising lead for designing agents with a high selectivity for novel PKC isozymes.     

A novel method for asymmetric synthesis of both enantiomers of α-substituted carboxylic acid derivatives from optically active 1-chlorovinyl p-tolyl sulfoxides and lithium ester enolates with 1,4-chiral induction from the sulfur chiral center

Treatment of optically active 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from symmetrical ketones and (R)-(−)-chloromethyl p-tolyl sulfoxide in three steps, with lithium enolate of carboxylic acid tert-butyl esters gave optically active adducts having a substituent at the α-position with high 1,4-chiral induction from the sulfur chiral center in high yields. The adducts were converted to optically active esters and carboxylic acids having a chiral center at the α-position. When this addition reaction was carried out with the ester enolate generated from excess carboxylic acid tert-butyl ester with LDA in the presence of HMPA, the diastereomer of the adduct was obtained. By using the two reaction conditions for the generation of the ester enolates, a new method for asymmetric synthesis of both enantiomers of carboxylic acid derivatives having a substituent at the α-position from the one chiral source, (R)-(−)-chloromethyl p-tolyl sulfoxide, was realized.     

动态单滴法研究乳状液液膜的稳定性

乳状液液膜作为化学分离的一种手段,自七十年代发现以来已有了许多进展,但是如何将其工业化还有许多课题有待于进一步研究.目前,除了乳状液液膜的水静态渗透性质以外,对乳状液液膜的稳定性和溶胀性质的研究主要采用搅拌法.虽然得到较好的规律性,但是搅拌法具有乳状液滴粒径分布广的弱点,对于不同的搅拌方式及条件,乳状液液膜的有效面积不同,对液膜作用的机械强度不同,因此结果会有很大差别.我们自行设计的动态单滴法实验装置,可定量地研究乳状液液膜的溶胀、稳定性及水渗透性质.     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

A stannylene strategy for regioselective acylation and phosphorylation of 1,2-cyclohexylidene-myo-inositol. Its convenient resolution and phosphatidylinositol synthesis

The bis(dibutylstannylene) derivative of 1,2-cyclohexylidene-myo-inositol reacted with (S)-O-acetylmandeloyl chloride and diphosphate tetraesters to give 3,6-dimandelate and 3-phosphate, respectively. Using the stannylene methodology for the optical resolution and regioselective phosphorylation of the ketal, a concise synthesis of phosphatidylinositol with the natural configuration was accomplished.     

反相悬浮聚合法合成超强吸水剂

以两性高分子作悬浮稳定剂，用反相悬浮聚合法合成了聚（丙烯酸盐－丙烯酰胺）类超强吸水剂．研究了交联剂、稳定剂、引发剂等用量、中和程度、单体组成及链转移剂等聚合条件对吸水剂吸水性能的影响．得到了吸蒸馏水１０５０ｍＬ／ｇ及吸０．９％ＮａＣｌ溶液８６ｍＬ／ｇ的超强吸水剂．此外，还比较了含不同反离子的聚丙烯酸类吸水剂的吸水性能     

Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.     

Kinetics study of thermal decomposition of epoxy resins containing flame retardant components

Hyperbranched polyphosphate ester (HPPE) and phenolic melamine (PM) were blended in different ratios with a commercial epoxy resin to obtain a series of flame retardant resins. The thermal decomposition mechanism of their cured products in air was studied by thermogravimetric analysis and in situ Fourier-transform infrared spectroscopy. The degradation behaviours of epoxy resins containing various flame retardant components were found to be greatly changed. The incorporation of phosphorus and nitrogen compounds improved the thermal stability at elevated temperature. The kinetics of thermal decomposition was evaluated by Kissinger method, Flynn-Wall-Ozawa method and Horowitz-Metzger method. The results showed that the activation energy at lower degree of the degradation decreased by the incorporation of flame retardant components, while increased at higher degree of the degradation.     

Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

酚醛型氰酸酯与双酚A型环氧共固化反应的FTIR研究

在恒温固化条件下,通过FTIR跟踪方法,研究了酚醛型氰酸酯与双酚A型环氧共固化反应的路径及其反应机理.共固化体系的反应过程包括在150℃及其以下温度,主要发生的是氰酸酯的三嗪环化固化反应,其中三嗪环化固化反应由于环氧的加入,反应速率被极大地提高了;同时,酚醛型氰酸酯中的氨基甲酸酯类杂质与环氧发生开环聚合反应,引起环氧官能团产生弱而持续的消耗.但在此阶段,酚醛型氰酸酯与环氧之间没有化学反应发生;在180℃及其以上温度,三嗪环和环氧发生反应,异构为异氰脲酸环结构,并进一步反应生成唑啉酮环结构,由于该反应的发生,促进了环氧官能团的消耗速度,在环氧官能团的转化率-时间图中,出现倒S曲线;在三嗪环的转化率图中,出现一个极大值后再降落的曲线.反应温度的提高有利于促进酚醛型氰酸酯与环氧之间的共固化反应,特别是当反应温度为220℃时,氰酸酯官能团和环氧官能团的消耗、三嗪环和唑啉酮环的生成均以较快的速率进行,—OCN生成三嗪环的转化率可以较容易地达到1,而唑啉酮环的转化率不超过0.5.