Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

反相悬浮聚合法合成超强吸水剂

以两性高分子作悬浮稳定剂，用反相悬浮聚合法合成了聚（丙烯酸盐－丙烯酰胺）类超强吸水剂．研究了交联剂、稳定剂、引发剂等用量、中和程度、单体组成及链转移剂等聚合条件对吸水剂吸水性能的影响．得到了吸蒸馏水１０５０ｍＬ／ｇ及吸０．９％ＮａＣｌ溶液８６ｍＬ／ｇ的超强吸水剂．此外，还比较了含不同反离子的聚丙烯酸类吸水剂的吸水性能     

Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.     

硅氧烷乳液聚合过程中大颗粒形成机理的研究：Ⅱ.聚硅氧烷乳液的耐酸碱…

研究了阴离子型与阳离子型聚硅氧烷乳液的耐酸碱稳定性，发现阴离子型乳液对酸碱都相当稳定，在乳液制备过程中，酸性催化剂不会引起乳液颗粒的凝聚；而阳离子型乳液的耐酸三稳定性性差，尤其是引起乳液颗粒慢速凝聚的碱浓度下限值很低，碱是制备阳离子型乳液的化剂，碱引起乳液颗粒的慢速凝聚是阳离子型乳液中大颗粒形成的主要原因，在乳液聚合过程中所发生的相当部分的乳化剂从水相向有机硅相的转移也是影响阳离子型乳液稳定性的一     

Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

Friction coefficients of spheres having sticky or hairy surfaces

The theoretical equations for friction coefficients of spheres having sticky or hairy surfaces are presented. In the present treatment, the sticky surface is represented by a higher viscosity of fluid in the surface layer and the hairy surface is assumed to have a porous structure. The friction coefficients are given as functions of the thickness of the surface layer, the fluid viscosity in the surface layer and the segmental density of hairy chains.     

自交联型丙烯酸酯共聚物乳液的研究

以羟甲基丙烯酰胺、丙烯酸作为活性单体，采用种子乳液聚合法制得四元体系自交联型丙烯酸酯共聚物乳液。用透射电镜观察了乳胶粒的微观形态，并对共聚物乳液的流变性，稳定性等进行了测试，考察了羟甲基丙烯酰胺和丙烯酸的含量、聚合方式对共聚物乳液性能的影响。     

含苯环亲水共聚物形态及溶液荧光

研究含芳环（生色团）的亲水性高分子对于了解高分子结构和性质之间的关系，开发新型发光材料很有意义[1.2]．前文[3.4]借报道了N-乙烯基咋冷丙烯酸共聚物（NVC－AA）的合成及发光性能研究，本文报道含苯环亲水高分子苯乙烯一丙烯酸共聚物（ST－AA）的微观结构与荧光特性?..     

Photogeneration of Silver Particles in PVA Fibers and Films

Fibers and films prepared from blends of poly(vinyl alcohol) and poly(acrylic acid) were found to be suitable matrices for the solid-state photoreduction of silver ions in the presence of air. Fast generation of nanometer-sized silver crystallites was observed when fibers of polymer blends crosslinked with dimethyl sulfoxide were irradiated with 350nm light. Optical determinations of the formation kinetics were carried out using thin films of noncrosslinked as well as lightly and heavily crosslinked polymer blends. Small Ag clusters were detected initially, which were stable in the dark but transformed into larger metal particles upon further illumination. Both formation processes occurred only under high light intensity illumination and the kinetic data were inconsistent with monophotonic mechanisms.     

Synthesis and characterization of SPE membrane based on sulfonated FEP‐g‐acrylic acid by radiation induced graft copolymerization for PEM fuel cell

A Novel solid polymer electrolyte (SPE) membrane containing both ? COOH and ? SO₃H group has been prepared by simultaneous method of radiation grafting of acrylic acid onto FEP followed by sulfonation. The presence of weakly acidic acrylic acid controls the swelling in water while ? SO₃H group provides conductivity due to its strongly ionic characteristic. FEP‐g‐acrylic acid and its sulfonated derivatives were characterized by their properties. While the mechanical properties decreased, other properties such as ion exchange capacity (IEC), water uptake and ionic conductivity increased with increase in graft content. These properties further changed on sulfonation. Acrylic acid being weakly acidic in nature, conductivity values of the grafted membrane were quite low. However, introduction of strong ? SO₃H group resulted in conductivity closer to Nafion 117. Few sulfonated membranes have been tested with respect to H₂/O₂ fuel cell performance. Short‐term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. Copyright © 2004 John Wiley & Sons, Ltd.