无机纳米粒子/丁苯胶乳复合技术的研究

研究了无机纳米粒子／丁苯胶乳的复合材料，用脂肪酸对纳米粒子进行了表面改性，使之均匀分散在丁苯胶乳中，用红外、吸油性，润湿试验等方法对改性纳米微粒进行了表征，纸张涂布和老化试验证明，纳米碳酸钙和纳米氧化锌具有优良的隔热效果，纳米氧化锌还有很好的防紫外老化功能，对以纳米TiO2为核，包覆苯丙共聚物的乳液矣合也作了初步研究。     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

A New Kind of Void Soap-free P（MMA-EA-MAA） Latex Particles

Soap-flee P(MMA-EA-MAA) particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and methacrylic acid (MAA), and large voids inside the particles were generated by alkali posttreatment in the presence of 2-butanone. Results indicated that the size of void and theparticle volume were related with the amount of 2-butanone. The generation mechanism of voids was proposed.     

Determination of Size Distribution of Nano-particles by Capillary Zone Electrophoresis

A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied. This method for the determination of size distribution was statistical.     

Morphology of peroxide-prevulcanised natural rubber latex: effect of reaction time and deproteinisation

A non-uniform mesh structure, i.e. a dense network near the surface of peroxide-prevulcanised natural rubber latex particles, was observed under transmission electron microscopy. In the initial period of prevulcanisation, the swelling ratio of the latex sheet decreased with longer reaction time while an increase in crosslink density of rubber particles containing polystyrene, prepared using the phase transfer/bulk polymerisation process, was noticed. The modulus of the rubber sheet increased up to maximum crosslinking and thereafter decreased. After removal of proteins from the latex membrane layer, derived from protein-lipid originally existing at the rubber particle surface, could not be detected. The absence of proteins, which act as free radical scavengers, resulted in a rapid diffusion of alkoxy radicals into the rubber phase of deproteinised latex and, therefore, a uniform crosslink distribution inside each particle was obtained.     

Heterocyclization of 1,1-dicyano-2-(trifluoromethyl)ethylenes with 1,3,3-trimethyl-3,4-dihydroisoquinoline and its derivatives

1,3,3-Trimethyl-3,4-dihydroisoquinolines react with 1,1-dicyano-2,2-bis(trifluoromethyl)ethylene to give 4-amino-6,6-dimethyl-2,2-bis(trifluoromethyl)-3-cyano-6,7-dihydro-2H-benzo[a]quinolizines. The reaction of 3,3-dimethyl-1-cyanomethylidene-1,2,3,4-tetrahydroisoquinoline and the methyl ester of 3,3-dicyano-2-(trifluoromethyl)acrylic acid leads to 5,5-dimethyl-3-oxo-2-(trifluoromethyl)-2-(dicyanomethyl)-2,3,5,6-tetrahydropyrrolo[2,1-a]isoquinoline.A. N. Nesmeyanov Institute of Heteroorganic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1888–1892, August, 1992.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

Use of α‐diketones as visible photoinitiators for the photocrosslinking of waterborne latex paints

The efficiency of several α‐diketones as visible light photoinitiators for the crosslinking of waterborne latex dispersions in the presence of acrylic monomers was evaluated. Among the eight α‐diketones studied, camphorquinone allows the fastest curing speed, and the curing of the acrylic waterborne coating is not affected by the presence of oxygen. The properties of the sunlight‐cured volatile organic compound (VOC)‐free pigmented paints prepared from the waterborne latex are as good or better than the equivalent conventional paint containing VOCs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3171–3181, 2002     

混合溶剂对磺化聚苯乙烯水基微乳液体系形态的影响

利用相反转技术制备磺化聚苯乙烯(SPS)水基微乳液,研究发现,通过选择溶剂和控制混合溶剂的组成,可制备不同颗粒形态结构的SPS水基微乳液,并研究了相反转过程、乳液稳定性与混合溶剂组成之间的关系。     

聚苯乙烯乳胶球三维有序体的制备及其显微形貌表征

A three-dimensional (3D) ordered structure was achieved by self-organization of monodisperse polystyrene latex about 250nm in diameter after being ambient dried. The stacked morphology was investigated by scanning electron microscopy(SEM) observation. It is shown that the face-centered cubic(FCC) phase dominantly exists. This finding presents a potential template for preparing an inverse FCC structure as a photonic crystal of full band gap if the index contrast is higher than 2.8.