d,h-m̈-Alkoxoalkylphosphonato-e-m̈-alkoxo-f-m̈-oxo-bis[trichloroantimon(V)]-Verbindungen

d,h-m?-Alkoxoalkylphosphonato-e-m?-alkoxo-f-m?-oxo-bis[trichloroantimony(V)] Compounds The binuclear antimony(V) complexes Cl₃Sb(O)[R³(R¹O)PO₂](OR²)SbCl₃ 1 to 7 with R¹, R² and R³ = Me or Et in solution slowly exchanges the R² groups between the equatorial oxygen atoms of the Sb₂O₂ ring. The SbO(3)PO(3)Sb ringsystem makes rapid pseudorotation. The resulting isomeres are detected by nmr spectroscopy.     

Effect of N2O pretreatment on fresh and regenerated Pd-Ag/α-Al2O3 catalysts during selective hydrogenation of acetylene

N₂O pretreatment has shown to result in enhancement of the performance of fresh commercial Pd-Ag/α-Al₂O₃ catalyst during selective acetylene hydrogenation. However, it showed no effect for the used and regenerated catalysts probably due to changes int he metal arrangement on the catalyst surface after regeneration.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

富氧条件下乙炔选择催化还原NOx

Acetylene as a reducing agent of metal exchanged HY catalysts, for selective catalytic reduction of NO in the reaction system of 0.16% NO, 0 （C2H2-SCR） was investigated over a series 08% C2H2, and 9.95% O2 （volume percent） in He. 75% of NO conversion to N2 with hydrocarbon efficiency about 1.5 was achieved over a Ce-HY catalyst around 300 ℃. The NO removal level was comparable with that of selective catalytic reduction of NOx by C3H6 reported in literatures, although only one third of the reducing agent in carbon moles was used in the C2H2-SCR of NO. The protons in zeolite were crucial to the C2H2-SCR of NO, and the performance of HY in the reaction was significantly promoted by cerium incorporation into the zeolite. NO2 was proposed to be the intermediate of NO reduction to N2, and the oxidation of NO to NO2 was rate-determining step of the C2H2-SCR of NO over Ce-HY. The suggestion was well supported by the results of the NO oxidation with O2, and the C2H2 consumption under the conditions in the presence or absence of NO.     

Synthesis and structural characterization of ferrocene-based bis(pyrazol-1-yl)borate ligands: FcB(Me)pz2K, Fc2Bpz2K, and 1,1′-fc[B(Me)pz2]2K2 (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl)

Reaction of the ferrocenyl(dimethylamino)boranes FcB(Me)NMe₂, Fc₂BNMe₂, and 1,1′-fc[B(Me)NMe₂]₂ with 1:1 mixtures of pyrazole and potassium pyrazolide in refluxing THF gave the potassium salts of the ferrocene-based bis(pyrazol-1-yl)borate ligands FcB(Me)pz₂K, Fc₂Bpz₂K, and 1,1′-fc[B(Me)pz₂]₂K₂ in good yield (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl). In the solid state, FcB(Me)pz₂K and Fc₂Bpz₂K form centrosymmetric dimers with short K?Cp contacts suggesting an η⁵ coordination mode of the potassium ion. The crystal lattice of the ditopic ligand 1,1′-fc[B(Me)pz₂]₂K₂ consists of coordination polymer strands featuring essentially the same structural motif that has been observed for the monotopic derivatives. All three scorpionate ligands are thus promising building blocks for the preparation of ferrocene-containing multiple-decker sandwich complexes.     

溶剂对钯催化的叔丁基乙炔低聚反应化学选择性的调控作用

报道了溶剂对钯催化的叔丁基乙炔低聚反应化学选择性的调控作用. 反应可在苯-正丁醇双组分溶剂体系中顺利进行, 当双组分溶剂体系中苯占优势比例时, 反应发生递次的三分子炔烃顺式插入, 经由顺式s-烯钯中间体生成环三聚产物1,3,5-三叔丁基苯; 而当双组分溶剂中正丁醇组分上升至一定比例, 反应选择性生成(3Z,5Z)-2,2,7,7-四甲基- 3,6-二氯-3,5-辛二烯或(3Z,5Z)-2,2,7,7-四甲基-3,6-二溴-3,5-辛二烯, 这是由于正丁醇可显著加快C—Pd σ键的断裂, 并与叔丁基乙炔、σ-烯钯中间体形成弱氢键作用力, 同时也与Pd(II)和Cu(II)等离子存在配位效应. 在强极性质子溶剂H₂O中, 反应生成偶联双炔: 2,2,7,7-四甲基-3,5-辛二炔. 文中就反应溶剂体系、钯铜催化剂及反应可能机理等分别进行了探讨.     

Surface diffusion in reversed-phase liquid chromatography using silica gels bonded with C1 and C18 ligands of different densities

Surface diffusion in reversed-phase liquid chromatography (RPLC) using silica gels bonded with C₁ and C₁₈ alkyl ligands of different densities was studied from the viewpoints of two extrathermodynamic relationships, i.e., enthalpy-entropy compensation (EEC) and linear free energy relationship (LFER). First, according to the four methods proposed by Krug et al., the values of surface diffusion coefficient (D_s) were analyzed to confirm that an actual EEC resulting from substantial physico-chemical effects takes place for surface diffusion. Then, it was also demonstrated that a LFER is observed between surface diffusion and the retention equilibrium. The establishment of EEC and LFER suggests a mechanistic similarity of molecular migration by surface diffusion, irrespective of the alkyl chain length and the densities of C₁ and C₁₈ ligands. Finally, a thermodynamic model for the LFER based on the real EEC was used to estimate D_s values under various RPLC conditions. The D_s values can be estimated with a mean square deviation of about 25–30%. The agreement between the D_s values estimated and those experimentally measured suggests that the total mass flux by surface diffusion consists of the two contributions due to C₁ and C₁₈ ligands and that the contribution of each ligand is proportional to the ligand density.     

Synthesis and Characterization of a [Mn12O12(O2CR)16(H2O)4] Complex Bearing Paramagnetic Carboxylate Ligands. Use of a Modified Acid Replacement Synthetic Approach

Summary.  A new modified approach for the synthesis of Mn₁₂ clusters, based on the use of complex [Mn₁₂O₁₂(O₂C ^t Bu)₁₆(H₂O)₄] (2) as starting material to promote the acidic ligand replacement, is presented here. This new synthetic approach allowed us to obtain complex [Mn₁₂O₁₂(O₂CC₆H₄N(O^•) ^t Bu)₁₆(H₂O)₄] (3), whose preparation remained elusive by direct replacement of the acetate groups of Mn₁₂Ac (1). Complex 3 bearing open-shell radical units, was prepared to increase the total spin number of its ground state, and consequently, to increase T _B , with the expectation that the radical ligands may couple ferromagnetically with the Mn₁₂ core. Unfortunately, magnetic measurements of complex 3 revealed that the sixteen radical carboxylate ligands interact antiferromagnetically with the Mn₁₂ core to yield a S = 2 magnetic ground state. Corresponding author. E-mail: vecianaj@icmab.es Received March 27, 2002; accepted May 2, 2002     

Scoring functions: A view from the bench

Computational approaches to drug design are presently hindered by the complexity of the physical chemistry which underlies weak, non- covalent interactions between protein targets and small molecule ligands. Although a number of programs are now available for the design of novel potential ligands, it remains a key problem to rank these rapidly and reliably by estimated binding affinity. Such a step is necessary to select only the most promising candidates for synthesis and experimental characterisation. To calculate ligand affinity quickly and reliably is an extremely difficult problem, but it may well prove possible to estimate sufficiently accurately given an appropriate set of parameters to score individual protein–ligand interactions. Improvements in the situation will require a wider set of thermodynamically characterised systems than is currently available.