Resolution of lymphocyte subpopulations derived from rat spleen by polyamine-graft-PHEMA copolymer

The retention behavior of lymphocyte subpopulations, B cell, T cell and null cell, derived from rat spleen to polyamine-graft-poly(2-hydroxyethyl methacrylate) copolymer (HA) surface was investigated, focusing on the conformational transition of the polyamine side chain as well as the protonation of amino groups in the polyamine grafts. Furthermore, the availability of HA was discussed as a column adsorbent for separation of lymphocyte subpopulations derived from spleen. The conformational transition of polyamine grafts significantly influenced the mode of retention of lymphocyte subpopulations. When polyamine grafts existed in an aggregated conformation (protonatin degree α < 0.5), the retention of lymphocyte subpopulations was decreased in the order B cell> null cell> T cell. On the other hand, when polyamine existed in an extended conformation into the aqueous interior from the matrix interface (α > 0.5), T cell retention became greater than null cell retention, resulting in a decreased B cell> T cell> null cell order. These results indicate that the differential retention of spleen lymphocyte subpopulations is attributed to their differential responses to the change in matrix interface accompanied by the protonation of amino groups. Furthermore, spleen lymphocytes were compared with lymph node lymphocytes in terms of resolution efficacy by an HA copolymer column.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

Ageing of Conductive Polyaniline/Poly(Ethylene-co-Vinylacetate) Composites Studied by Thermal Methods

The long-term environmental ageing of conductive composite films containing ethylene-co-vinyl-acetate (EVA) copolymer and a complex of polyaniline (PANI) and dodecylbenzenesulfonic acid (DBSA) was studied by using differential scanning calorimetry (DSC). We assume that both phase separation and crosslinking of PANI main chains occur in the systems. On the other hand, the competition between PANI–DBSA complex self-organization and crystallization of EVA matrix result in structural changes and formation of continuous conductive network, responsible for significantly increased (ca five orders of magnitude) electrical conductivity of the aged films. This revised version was published online in August 2006 with corrections to the Cover Date.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Further studies of M3(μ3-O)(μ-X)3(μ-O2CCH3)3L3 (M=Mo,W) type clusters with nine core electrons

Four new compounds having nine cluster electrons and cores of the types Mo₃OCl₃, Mo₃OBr₃, and W₃OCl₃ are reported. Compound (1) prepared by reduction of [Bu₄N][Mo₃OCl₆(OAc)₃] in THF with metallic zinc, was shown by X-ray crystallography to be Mo₃OCl₄(OAc)₃ (THF)₂ (1). It forms crystals in space groupP2₁ with unit cell dimensionsa=9.472(2) Å,b=13.546(4) Å,c=9.652(2) Å, =101.70(2)°,V=1201(1) Å₃,Z=2. The [Mo₃(₃-O)(-Cl)₃]⁴⁺ core is surrounded by three -O₂CCH₃ anions, one Cl^–, and two THF and has Mo-Mo distances of 2.620(1) Å, 2.613(1) Å, and 2.530(1) Å, with the shortest bond between the two Mo atoms to which the THF molecules are coordinated. Compounds [Bu₄N]₂ [Mo₃OBr₆(O₂CCH₃)₃] · Me₂CO, (2) and [Mo₃OBr₃(O₂CCH₃)₃(PMe₃)₃]₃ · BF₄, (3) are the first two nine-electron Mo₃ species with a [Mo₃(₃-O) Br₃]⁴⁺ core. Both were obtained by zinc reduction of [Mo₃OBr₆(O₂CCH₃)₃]^– in the presence of (NBu₄) Br (2) or PMe₃ and NaBF₄ (3), and each was characterized crystallographically. Compound (2) crystallized in space group Cc with unit cell dimensionsa=25.037(5) Å,b=12.827(2) Å,c=21.484(4) Å, =122.96(1)⁰,V=5790(3) ų,Z=4. While the anion has no crystallographically required symmetry, its virtual symmetry is C_3v . The Mo-Mo distances are 2.619(2) Å, 2.610(3) Å, 2.644(2) Å, with a mean value of 2.624[14] Å. Compound (3) crystallized in space groupP2₁/c with unit cell dimensionsa=10.846(2) Å,b=25.033(5) Å,c=12.641(5) Å, =94.74(2)⁰,V=3420(2) ų,Z=4. The cation occupies a general position but has virtual C_3v symmetry, with Mo-Mo distances of 2.601(2) Å, 2.610(2) Å, 2.627(2) Å, with a mean value of 2.613[14] Å. Thus the anionic and cationic Mo₃ clusters in (2) and (3), respectively, have average Mo-Mo distances that are equal within experimental error. Compound (4), [NEt₄]₂ [W₃OCl₆(O₂CCH₃)₃] is the first 9-electron compound of this type containing tungsten. It was prepared by reduction of [Et₄N][W₃OCl₆(OAc)₃] in benzene with Na/Hg. It crystallized in space groupP2₁2₁2₁ with unit cell dimensionsa=11.076(2) Å,b=14.345(2) Å,c=21.026(3) Å,V=3574(1) ų,Z=4. The anion resides on a general position but has virtual C_3v symmetry, with W-W distances of 2.577(1) Å, 2.612(1) Å, 2.584(1) Å and a mean value of 2.591[15] Å.     

IMPACT PROPERTIES OF METALLOCENE - CATALYZED ETHYLENE-α-OLEFIN COPOLYMERS

The impact properties of two selected metallocene-catalyzed ethylene-butene copolymers and one conventionalcopolymer were evaluated using Izod impact test. It is found that the metallocene-catalyzed copolymer shows superior impactproperties. This result was explained on the basis of the more homogeneous inter-molecular composition distribution andnarrower molecular weight distribution, which leads to more homogeneous morphology with fewer defects. Stepwisecrystallization improves the impact properties, especially in the crack propagation process, to a large extent. This is due to thedecrease of entanglements by stepwise crystallization, which is advantageous for the chain slip and shear. The polymer withheterogeneous intra-molecular composition distribution exhibits a more evident improvement of impact properties understepwise crystallization.     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

尼龙1010／尼龙6共聚物的表观相图研究

采用显微熔点法和ＤＳＣ测定了尼龙１０１０／尼龙６共聚物的表观相图；分析了投料比与链节结构单元含量的关系。最低熔点时尼龙１０１０／尼龙６的理论重量投料比为６０／４０，摩尔比为３３．３／６６．７，实验结果与此相近。     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

EVA-g-VC的结构和动态粘弹性

本文研究了聚乙烯-醋酸乙烯酯(EVA,VAc:14％)与氯乙烯(VC)接枝共聚物(EVA-g-VC)的相结构和分子结构。接枝物EVA-g-VC由游离EVA、均聚PVC和EVA-VC接枝高分子三者组成,EVA呈连续相,PVC呈分散微粒。EVA-g-VC中EVA的含量越高,PVC粒子体积越小。实验结果表明,接枝物中“凝胶”的EVA玻璃化温度,随投料比(VC/EVA)的减小而升高;另外随VC/EVA减小,凝胶中PVC的含量和PVC的分子量也减小。这些结果说明,VC/EVA较小时得到的接枝物中,EVA上VC接枝点的数目较多,而PVC接枝链的长度较短。EVA-VC是不相容两相——EVA和PVC的“粘着剂”,其作用表现在:VC/EVA越小,接枝物中EVA和PVC的玻璃化温度越靠近。