温敏性嵌段共聚物纳米胶束的制备及其稳定性

通过N-异丙基丙烯酰胺(NIPAAm)和N,N-二甲基丙烯酰胺(DMAAm)在链转移剂巯基乙醇存在下的自由基共聚,制备了具有端羟基的共聚物P(NIPAAm-co-DMAAm).利用其端羟基在异辛酸亚锡催化下引发己内酯开环聚合,得到了两亲性嵌段共聚物P(NIPAAm-co-DMAAm)-b-PCL,并在聚己内酯(PCL)链末端引入可光催化反应的不饱和双键.通过1H-NMR、GPC和相转变温度(LCST)等方法对聚合物进行了结构表征,测定了嵌段共聚物形成胶束的临界胶束浓度和胶束粒径,比较了核交联前后胶束的粒径和稳定性.结果表明:通过调节共聚物的组成,可获得LCST在40℃附近的胶束,胶束经核交联后,粒径有所减小,但稳定性明显提高,可用于对药物的温敏控制释放.     

Preparation of monodispersed vinylpyridine–divinylbenzene porous copolymer resins and their application to high-performance liquid chromatographic separation of aromatic amines

For the separation of aromatic amines, two types of monodispersed porous polymer resins were prepared by the copolymerization of 2-vinylpyridine and 4-vinylpyridine with divinylbenzene in the presence of template silica gel particles (particle size 5 μm), followed by dissolution of the template silica gel in an alkaline solution. The transmission electron micrographs and the scanning electron micrograph revealed that these templated polymer resins have a spherical morphology with a good monodispersity and porous structure. Using these monodispersed polymer resins, the high-performance liquid chromatographic separation of aromatic amines in the mobile phases of pHs 2.0, 2.9, 4.1, 7.2 and 11.7 were carried out. The 2-vinylpyridine–divinylbenzene copolymer resins showed slightly stronger retentions for aromatic amines than the 4-vinylpyridine–divinylbenzene copolymer resins. Under acidic conditions (around pH 2.0), aniline and the toluidines showed no retention on these copolymer resins due to the repulsion between the cationic forms of these amines and pyridinium cations in the stationary phase, whereas less basic aromatic amines or non-basic acetanilide showed slight retentions. Above pH 4.1, the separation of aromatic amines with these polymer resins showed a typical reversed-phase mode separation. Therefore, the separation patterns of aromatic amines are effectively tunable by changing the pH value of the mobile phases. A good separation of eight aromatic amines was achieved at pH 2.9 using the 2-vinylpyridine–divinylbenzene copolymer resins.     

STRUCTURAL CHARACTERIZATION OF POLY(ϵ-CAPROLACTONE) AND POLY(ϵ-CAPROLACTONE-b-ISOBUTYLENE-b-ϵ-CAPROLACTONE) BLOCK COPOLYMERS BY MALDI-TOF MASS SPECTROMETRY

Poly(?-caprolactone)(PC1) and PC1-polyisobutylene-PC1 (PC1-PIB-PC1) block copolymers were synthesized in anhydrous toluene by in situ conversion of 2-methyl-1-propanol (2M1P) and α,ω-dihydroxy PIB, respectively, to the corresponding aluminum alkoxide by reaction with a stoichiometric amount of triethylaluminum (TEA) followed by the addition of e-caprolactone. Structural characterization of 2M1P-initiated PCl by gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry (MS) demonstrated the presence of cyclic oligomers, which are produced by intramolecular transesterification reactions that become significant at high monomer conversions. A minor fraction of chains bearing carboxylic acid termini was also observed in the MALDI-TOF mass spectrum; however, carboxylic acid chain ends could not be detected by ¹³C NMR analysis. Thus, the likely origin of the carboxylic acid termini is fragmentation of the initiator residue from the chain end during MALDI-TOF analysis. For PCl-PIB-PCl block copolymers, two different α,ω-telechelic PIB diols were used as macroinitiators, one derived from allyl and one from isopropenyl terminated PIB. Terminal olefins were converted to primary alcohols via regioselective hydroboration followed by alkaline hydrogen peroxide oxidation. After reaction with ?-caprolactone, formation of a block copolymer was evidenced by a shift of the polymer peak to lower elution volume in GPC analysis. Block copolymers possessed molecular weight distributions ≤1.4, and molecular weights of the PCl blocks calculated from GPC were in excellent agreement with those found using MALDI-TOF MS. Structural analysis indicated that the PCl end blocks were severed from the crude block copolymer during MS analysis, for both allyl- and isopropenyl-derived materials. For allyl-derived materials the PCl blocks were found to predominantly carry a C₂ residue at the point of detachment of the PIB block; however, the isopropenyl-derived block copolymers showed a complex mixture of different residues suggesting a complex fragmentation mechanism during loss of the PIB block.     

Novel perfluoropolyethers containing 2,2,4-trifluoro-5-trifluoromethoxy-1,3-dioxole blocks: synthesis and characterization

Peroxidic perfluoropolyethers (PFPEs) are industrial intermediates used by Solvay Solexis for the preparation of different classes of (per)fluoropolyethers (Fomblin^®, Galden^®, Solvera^®, Fluorolink^®). The chemistry of these peroxidic compounds has been recently exploited for the synthesis of novel PFPE block copolymers. In the present work we report the synthesis, the structural and physical-chemical characterization of block copolymers obtained by the reaction of peroxidic PFPEs with 2,2,4-trifluoro-5-trifluoromethoxy-1,3-dioxole, a cyclic homopolymerizable perfluoroolefin. These block copolymers combine the most attractive properties of the PFPEs, like the excellent lubrication, the high thermal stability and the optical transparency, with new specific properties which are related to the perfluorodioxolenic blocks.     

聚环氧乙烷-g-聚己内酯两亲性接枝共聚物的合成及药物释放行为

通过环氧丙醇(GL)与环氧乙烷(EO)的阴离子顺序开环聚合制备了水溶性嵌段共聚物PEO-b-PGL, 以PGL嵌段每个重复单元的侧羟基为引发点进一步引发ε-己内酯(CL)的开环聚合, 合成了结构规整的以聚环氧乙烷(PEO)为主链的两亲性接枝共聚物(PEO-b-PGL-g-PCL). 研究了PEO-b-PGL-g-PCL在水相中的自组装行为, 采用稳态荧光探针法测定了胶束的临界胶束浓度(cmc). 以疏水性药物阿霉素(DOX)为模型药物, 研究了两亲性接枝共聚物的化学组成对药物的扩散释放以及降解释放行为的影响.     

Preparation of Antimicrobial Ultrafine Cellulose Acetate Fibers with Silver Nanoparticles

Summary: A feasible method for the preparation of antimicrobial ultrafine fibers with silver nanoparticles was developed by direct electrospinning of a cellulose acetate (CA) solution with small amounts of silver nitrate followed by photoreduction. Silver nanoparticles in ultrafine CA fibers were stabilized by interactions with carbonyl oxygen atoms in CA. Ultrafine CA fibers with silver nanoparticles showed very strong antimicrobial activity.

TEM image of an ultrafine CA fiber electrospun from 10 wt.‐% CA solution with 0.5 wt.‐% AgNO₃.     

A new, efficient, and simple method for the synthesis of thiiranes from epoxides under solvent-free conditions

A simple, efficient, and new method has been developed for the synthesis of thiiranes from epoxides through a one-pot reaction of epoxides with diethyl phosphite in the presence of ammonium acetate or ammonium hydrogen carbonate/sulfur/ and acidic alumina under solvent-free conditions using microwave irradiation.     

Synthesis and MALDI-TOF-MS of PS-PMA and PMA-PS block copolymers

The synthesis of well-defined block copolymers from styrene and methyl acrylate via ATRP is discussed in this contribution. Kinetic studies on these block copolymerizations as well as characterization studies were performed to investigate the monomer composition in the respective PS and PMA blocks. MALDI-TOF-MS was performed to clarify the exact number of repeating units of each block and the total number of units in the block copolymer. Block copolymers up to 22 kDa could be analyzed by MALDI-TOF-MS, whereby polymers with PMA as first block showed a large second distribution corresponding to PMA homopolymers. However, SEC demonstrated that only a small amount of homopolymer was present indicating that care needs to be taken with interpreting MALDI-TOF-MS data, which is a qualitative rather than a quantitative technique.     

Di-block copolymer stabilized methyl methacrylate based polyHIPEs: Influence of hydrophilic and hydrophobic co-monomers on morphology,wettability and thermal properties

Due to intermediate hydrophobicity of methyl methacrylate (MMA) monomer in water, it is difficult to prepare its stable water in oil high internal phase emulsion (HIPE). Moreover, the addition of fully hydrophilic co-monomer such as 2-hydroxyethyl methacrylate (HEMA) in MMA monomer makes it further troublesome to stabilize these emulsions. This paper addresses the preparation of such type of difficult to prepare emulsions via addition of an amphiphilic fluorinated di-block copolymer (FDB), poly(2-dimethylamino)ethylmethacrylate-b-poly(trifluoroethyl methacrylate) (PDMAEMA-b-PTFEMA) as stabilizer. Interestingly, HEMA and/or HFBA (hexa fluorobutyl acrylate) as co-monomers were successfully added to impart some special properties such as thermodynamic stability, desired amphiphilicity to the final polyHIPEs. Fluorinated blocks in FDB anchored well at oil/water interface of HIPE, offering enough hydrophobicity to the comparatively hydrophilic monomers and in turn providing resistance against coalescence. MMA polyHIPEs were found to be fully hydrophobic just by replacing HEMA co-monomer with HFBA. Due to superb inherent hydrophobic nature of fluorine atoms, MMA-HFBA polyHIPEs showed remarkable water contact angle of 139°. Furthermore, the addition of fluorinated co-monomer in MMA based HIPEs significantly improved thermal stabilities of these materials with improvement in degradation temperature from 305 °C to 360 °C.     

含有三氟乙烯基芳基醚侧基的聚丙烯酸酯的合成与表征

研究了聚丙烯酸酯侧基上引入三氟乙烯基芳基醚结构单元的方法. 首先, 合成了含有三氟乙烯基芳基醚侧基的丙烯酸酯单体, 然后通过原子转移自由基聚合实现了该单体的均聚和无规共聚, 得到了含有三氟乙烯基芳基醚侧基的聚丙烯酸酯聚合物, 聚合物的分子量分布较窄. 通过控制共聚投料比, 可以得到具有不同含量三氟乙烯基芳基醚侧基的无规共聚物.