MICROWAVE ACCELERATED TETRAHYDROPYRANYLATION AND DETETRAHYDROPYRANYLATION OF ALCOHOLS,PHENOLS, AND THIOLS CATALYZED BY HYDRATED ZIRCONIA

ABSTRACT

A solvent free and expeditious method for tetrahydropyranylation and detetrahydropyranylation of alcohols, phenols and thiols is described using hydrated zirconia and 3,4-dihydro-2H-pyran (DHP). A comparison of this microwave-accelerated reaction with conventional heating condition is also presented.     

Perylene-based profluorescent nitroxides for the rapid monitoring of polyester degradation upon weathering: An assessment

A profluorescent nitroxide possessing an isoindoline nitroxide moiety linked to a perylene fluorophore was developed to monitor radical mediated degradation of melamine-formaldehyde crosslinked polyester coil coatings in an industry standard accelerated weathering tester. Trapping of polyester-derived radicals (most likely C-radicals) that are generated during polymer degradation leads to fluorescent closed-shell alkoxy amines, which was used to obtain time-dependent degradation profiles to assess the relative stability of different polyesters towards weathering. The nitroxide probe couples excellent thermal stability and satisfactory photostability with high sensitivity and enables detection of free radical damage in polyesters under conditions that mimic exposure to the environment on a time scale of hours rather than months or years required by other testing methods. There are indications that the profluorescent nitroxide undergoes partial photo-degradation in the absence of polymer-derived radicals. Unexpectedly, it was also found that UV-induced fragmentation of the NO–C bond in closed-shell alkoxy amines leads to regeneration of the profluorescent nitroxide and the respective C-radical. The maximum fluorescence intensity that could be achieved with a given probe concentration is therefore not only determined by the amount of polyester radicals formed during accelerated weathering, but also by the light-driven side reactions of the profluorescent nitroxide and the corresponding alkoxy amine radical trapping products. Studies to determine the optimum probe concentration in the polymer matrix revealed that aggregation and re-absorption effects lowered the fluorescence intensity at higher concentrations of the profluorescent nitroxide, but too low probe concentrations, where these effects would be avoided, were not sufficient to trap the amount of polyester radicals formed upon weathering. The optimized experimental conditions were used to assess the impact of temperature and UV irradiance on polymer degradation during accelerated weathering.     

Determination of synthetic musks in the sediment of the Taihu lake by using accelerated solvent extraction (ASE) and GC/MS

Synthetic musks, substitutes for natural musks, are widely distributed in environment. They have been detected in water, sludge, fish, shrimp, mussels and other aquatic animals, and even in human's adipose tissue, blood and breast milk. In this study, a new extraction procedure, based on the accelerated solvent extraction (ASE) and in cell clean-up technique was developed and successfully coupled with gas chromatography-mass spectrometry (GC/MS) for the analysis of musks in sediment samples. With this method, the limits of detection as low as 0.03–0.05?ng?g^?1 and the recovery rate of 86.0%–104% are achieved. When compared with soxhlet extraction (SE) and ultrasonic extraction (USE), ASE not only has the best extraction efficiency but also has advantage in extraction time and solvent consumption. Eight synthetic musks, including six polycyclic musks (Tonalide (AHTN), Galaxolide (HHCB), Phantolide (AHDI), Traseolide (ATII), Cashmeran (DPMI) and Celestolide (ADBI)) and two nitro musks (musk xylene (MX) and musk ketone (MK)), were evaluated in sediment samples collected from 15 selected locations of the Taihu lake, one of the largest freshwater lakes in China. The contents of synthetic musks in sediment samples range from 0.336 to 3.10?ng?g^?1 for HHCB, 0.184 to 1.21?ng?g^?1 for AHTN, below detection limit (BDL) to 0.349?ng?g^?1 for MX, and BDL to 0.0786?ng?g^?1 for MK. The contents of DPMI, ADBI, AHMI and ATII are below detection limit in all samples. The results reflect current status of fragrance compound pollution in this area, and provide basic data for environmental policy making.     

加速溶剂提取-同位素稀释-高分辨气相色谱-高分辨质谱法测定生物样品中82种多氯联苯

我国水产品中多氯联苯(PCBs)的检测方法,主要以6种指示性PCBs和12种二噁英类共平面PCBs为主,仅涵盖有限的PCBs。为更全面地获得生物体中PCBs的浓度水平,深入探讨PCBs在生物体内的代谢和富集特征,进而准确评价PCBs对人类的暴露水平及风险,以鱼和贝类作为生物样品代表,建立了加速溶剂提取-同位素稀释-高分辨气相色谱-高分辨质谱(ASE-ID-HRGC-HRMS)测定生物样品中82种PCBs的方法。比较了振荡提取和加速溶剂提取两种提取方式的回收率和重复性,最终采用正己烷-二氯甲烷(1∶1, v/v)对PCBs进行加速溶剂提取。考察了各流分淋洗液对PCBs的回收率,确定了样品提取液经8 g 44%酸性硅胶层析柱(内径15 mm), 90 mL正己烷洗脱的净化方式。样品提取液净化浓缩后进行HRGC-HRMS分析,色谱柱采用DB-5MS超低流失石英毛细管柱(60 m×0.25 mm×0.25 μm)。通过优化后的升温程序对化合物进行分离,以保留时间和两个特征离子精准定性,采用同位素内标法定量。结果表明,在0.1~200 μg/L范围内,平均相对响应因子(RRF)的相对标准偏差值(RSD, n=7)均≤20%,相关系数(r²)>0.99。生物样品中PCBs的方法检出限为0.02~3 pg/g;鱼类中PCBs平均加标回收率为71.3%~141%, RSD(n=7)为2.1%~14%;贝类中PCBs平均加标回收率为76.9%~143%, RSD为1.4%~11%。该方法灵敏、准确、可靠,可以更加全面具体地分析鱼和贝类等水产品受PCBs的污染情况,为国内外开展生物监测提供有效的技术支持,从而服务于相关生态环境管理及履行《斯德哥尔摩公约》。     

Accelerated Landweber iteration with convex penalty for linear inverse problems in Banach spaces

In recent years, Landweber iteration has been extended to solve linear inverse problems in Banach spaces by incorporating non-smooth convex penalty functionals to capture features of solutions. This method is known to be slowly convergent. However, because it is simple to implement, it still receives a lot of attention. By making use of the subspace optimization technique, we propose an accelerated version of Landweber iteration with non-smooth convex penalty which significantly speeds up the method. Numerical simulations are given to test the efficiency.     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.     

Mercury forms and their transformation in pyrite under weathering

Pyrite is considered to be the major carrier of mercury in coal. Here, the chemical characteristics of two natural pyrite samples of different weathering degrees were characterized by time-of-flight secondary ion mass spectrometry (TOF-SIMS). Thermal stability of Hg was also analyzed via temperature programmed desorption experiment (TPD). Characteristic ions such as S⁻, Fe⁺, FeS⁻, and FeS₂⁻ were detected on the surface of fresh pyrite. The release temperature of Hg ranged between 180°C and 300°C, and the characteristic peak of black HgS was recorded. In addition, abundant Fe₂O₃⁻, FeSO⁻, SO₄⁻, and HSO₄⁻ were detected on the surface of weathered pyrite, and the release temperature of Hg therein was mainly distributed at 260°C to 380°C and 520°C to 600°C, corresponding to the characteristic peaks of red HgS and HgSO₄, respectively. The results show that pyrite is acidified during weathering and that Hg forms in pyrite are transformed from the original state (HgS) to HgSO₄.     

G-Protein-Coupled Receptor–Membrane Interactions Depend on the Receptor Activation State

G-protein-coupled receptors (GPCRs) are the largest family of human membrane proteins and serve as primary targets of approximately one-third of currently marketed drugs. In particular, adenosine A₁ receptor (A₁AR) is an important therapeutic target for treating cardiac ischemia–reperfusion injuries, neuropathic pain, and renal diseases. As a prototypical GPCR, the A₁AR is located within a phospholipid membrane bilayer and transmits cellular signals by changing between different conformational states. It is important to elucidate the lipid–protein interactions in order to understand the functional mechanism of GPCRs. Here, all-atom simulations using a robust Gaussian accelerated molecular dynamics (GaMD) method were performed on both the inactive (antagonist bound) and active (agonist and G-protein bound) A₁AR, which was embedded in a 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) lipid bilayer. In the GaMD simulations, the membrane lipids played a key role in stabilizing different conformational states of the A₁AR. Our simulations further identified important regions of the receptor that interacted distinctly with the lipids in highly correlated manner. Activation of the A₁AR led to differential dynamics in the upper and lower leaflets of the lipid bilayer. In summary, GaMD enhanced simulations have revealed strongly coupled dynamics of the GPCR and lipids that depend on the receptor activation state. © 2019 Wiley Periodicals, Inc.     

液相色谱-质谱联用法测定血液中全氟化合物

研究了快速溶剂萃取-液相色谱/质谱联用技术测定血液中PFAAs的方法。血液样品经过冷冻干燥,利用加速溶剂萃取的方法,最后使用液相色谱-质谱仪分析检测PFAAs成分。方法的回收率为74.6%~128.8%,检出限为1.10~25.1 ng/L。通过对珠江三角洲地区人群血液样本的分析,发现∑9PFAAs的浓度为26.8~557 ng/g,平均值为176±90.1 ng/g。血液中PFAAs的主要成分以PFHxA和PFOS为主,分别占血液中PFAAs浓度的20.97%和66.98%。人群血液中最常见和浓度最高的PFAAs是PFOS,而PFOA浓度相对较低。     

加速溶剂萃取-磁固相萃取-高效液相色谱-串联质谱法测定水产品中10种氟喹诺酮类药物残留

养殖过程中的不合理使用和滥用使得水产品中氟喹诺酮抗生素残留累积量呈递增趋势,对人类的健康造成潜在的风险。建立高效、灵敏和可靠的水产品中氟喹诺酮类药物的同时分析方法十分重要。该研究建立了加速溶剂萃取-磁固相萃取-高效液相色谱-串联质谱法(ASE-MSPE-HPLC-MS/MS)测定水产品中沙拉沙星、氧氟沙星、恩诺沙星、丹氟沙星、洛美沙星、培氟沙星、环丙沙星、依诺沙星、诺氟沙星和双氟沙星残留的检测方法。采用室温自组装法,即在室温(25 ℃)下,将氧化石墨烯和零价纳米铁储备液快速涡旋混合,磁性分离收集沉淀物,得到GO@nZVI磁性复合材料。以扫描电镜、傅里叶变换红外光谱和X-射线衍射对磁性复合材料进行表征,结果显示GO@nZVI成功制备。该材料应用于MSPE净化中,ASE萃取温度为70 ℃,萃取溶剂为甲醇,萃取压力为10.34 MPa,静态萃取时间为5 min,循环萃取3次。萃取液浓缩后经MSPE有效净化后,采用Agilent ZORBAX Eclipse Plus C18色谱柱(100 mm×3.0 mm, 1.8 μm)梯度洗脱分离,MS/MS电喷雾正离子(ESI⁺)扫描、多反应监测(MRM)模式进行定量分析。氟喹诺酮的线性范围为1~100 μg/kg,线性相关系数(r²)均大于0.9995;目标物的检出限(S/N=3)为0.02~0.29 μg/kg,定量限(S/N=10)为0.07~0.98 μg/kg。所建方法成功用于黄鱼、草鱼、黑鱼、明虾和沼虾中氟喹诺酮的测定,在1倍、2倍、10倍定量限加标水平下得到的加标回收率为81.6%~105.8%,相对标准偏差(RSD)为4.2%~13.6%。研究表明,将ASE与MSPE有机结合,利用外部磁场实现萃取液的净化,无需离心和过滤操作,溶剂用量少,并且该方法所使用磁性萃取材料制备方法简单,具有自动化程度高、简便快速、方法灵敏度高、准确度高、重复性好等特点,可满足对水产品中FQs残留限量检测要求,具有实际应用前景。