二氧化硫的电化学氧化过程：Ⅲ.SO2在聚钴卟啉电极上的氧化机理

采用循环伏安法，稳态法，计时电位法等研究了ＳＯ２在聚钴卟啉膜电极上的电化学氧化过程，并和ＳＯ２在贵金属电极上的行为进行了比较。     

负载型贵金属催化剂的硫中毒机理——载体的酸碱性与催化剂抗硫性能的关系

以H_2S为毒物,H_2-O_2反应为催化模型反应,制备并考察了一系列不同酸碱性的负载型钯催化剂。以NH_3和吡啶为探针分子,用程序升温脱附(TPD)或红外光谱法测定了催化剂的酸碱性。用交替脉冲微反色谱技术评价了催化剂的活性和耐硫中毒性,并对催化剂的耐硫性能和载体酸碱性进行关联和解释。在以上研究基础上,指出了提高催化剂抗硫性能的途径。     

Catalytic Asymmetric[2,3]-Sigmatropic Rearrangement of Sulfur Ylides Generated from Carbenoids and Allenic 2-Methylphenyl Sulfide

The first investigation on catalytic asymmetric [2, 3]-sigmatrop-ic rearrangement of sulfur ylides generated from carbenoids andallenic phenyl sulfide was carried out. Up to 55% ee value wasobtained.     

Study of clinker dopped with P and S compounds

The sintering and the structure of clinkers, modified by the introduction of different ionic forms of sulfur and phosphorus into the raw mix, were examined. One reference synthetic mixture and 25 modified mixtures were prepared by mixing the reference sample with 0.5, 1.0, 1.5, 2.0 and 2.5%w/w of chemical grade CaSO₄, CaS, Ca₃(PO₄)₂, CaHPO₄ and Ca(H₂PO₄)₂. Free lime content in all samples was measured. The sintering reactions in samples were recorded by means of differential thermal analysis. The texture of the clinkers was examined using a scanning electron microscope and EDX. It is concluded that, despite of their relatively low doping concentration in the raw mix, P and S affect considerably its reactivity and the texture of the clinker. The various ionic forms of the same element (SO₄ ^2-, S^2- for S, PO₄ ^3-, HPO₄ ^2- and H₂PO₄ ^- for P) exhibit a different and unequivocal effect on the reactivity of the synthetic raw mix and on the texture of the corresponding clinkers. S (in both forms) and P (added as HPO₄ ^2-) are mainly dissolved in the melt and they have a positive effect on the burnability of the raw mix. P (added as PO₄ ^3- or H₂PO^4-) is preferentially accumulated in belite. In this case further stabilization of β-C₂S occurs and the binding of the free lime is hindered. This revised version was published online in August 2006 with corrections to the Cover Date.     

Chalcogenide Exchange Reaction of [RGa(μ3-Te)]4 with Elemental Sulfur and Selenium: A Density Functional Theory Study

Thermodynamic and mechanistic features of the chalcogen exchange reaction between [RGa( ₃-Te)]₄ and elemental sulfur or selenium have been studied employing density functional theory (DFT) calculations using the BL3YP basis set and Stuttgart pseudopotentials. For [MeGa( ₃-E)]₄ (E=S, Se, Te) the correlation between the calculated parameters and diffraction data for their isolable analogs is greater than 98%. Each step of the conversion of [MeGa( ₃-Te)]₄ to [MeGa( ₃-E)]₄ via [Me₄Ga₄( ₃-Te)_4–x ( ₃-E) _x ] (E=S, Se) is predicted to occur as a series of isolated reactions. The entropy change for each chalcogen exchange is small in magnitude and corresponds to the degree of cage distortion within the cubane molecules. Calculations performed on [MeGa( ₃-Te)]₄...S₈ and [MeGa( ₃-Te)]₄-S suggest that an increase in electrophilicity of the gallium next to a surface bound tellurium may result in nucleophilic cage opening for which intermediate structures are calculated.     

Facile S-alkyl thiocarbamate synthesis by a novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur

A novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamates. In the presence of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), S-alkyl thiocarbamates are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20°C). In the absence of DBU, however, no formation of S-alkyl thiocarbamate is observed. The present DBU-assisted carbonylation can also be applied to new synthetic methods for benthiocarb and orthobencarb (herbicides) and carbamoyl chlorides.     

Determination of polycyclic aromatic sulfur heterocycles (PASH) in diesel fuel by high performance liquid chromatography and photodiode-array detection

An oxidation method (sulfone method) for the determination of polycyclic aromatic sulfur heterocycles (PASH) in diesel fuel is presented. The aromatic fraction of a diesel fuel, isolated by solid phase extraction, is oxidized under controlled conditions with hydrogen peroxide. The oxidation products, mainly methylated dibenzosulfone, are determined and quantified directly, without further clean-up, by HPLC with photodiode-array detection.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 2: Effect of sulfur vulcanization on mass changes and thickness distribution of oxidation products during thermal oxidation

Thermal oxidation of sulfur vulcanized polyisoprene samples was studied by gravimetry and IR mapping of carbonyl groups (to determine the oxidized layer thickness (TOL)) at temperatures ranging from 60 to 150 °C in air. Oxidation appears noticeably lower than that for the starting non-vulcanized polyisoprene, revealing a stabilizing effect of sulfur-containing species. After a short period where mass loss presumably due to water evaporation predominates, the sample mass increases until a plateau corresponding to 6.3% (at 60 °C) to 0.5% (at 140 °C) mass gain. Practically no weight gain (∼0.1%) was observed at 150 °C. The mass uptake is due to oxygen grafting to the chains. TOL varies from about 4.6 mm (70 °C) to about 1 mm (150 °C).A kinetic model, derived from a mechanistic scheme of radical chain oxidation including stabilizing events due to hydroperoxide reduction by sulfur-containing groups and taking into account the diffusion-reaction coupling, was established and numerically resolved. The model predictions for mass changes and TOL values are in good agreement with experimental data.     

煤的超临界醇萃取脱硫：Ⅲ.形态硫的变化

本文分别应用Ｍｏｓｓｂａｕｅｒ谱和ＸＰＳ（Ｘ射线光电子能谱）技术考察不同反应 条件下固体产物中的无机硫和有机硫的形态变化，结果表明；在超临界醇萃取脱硫过程中，黄铁矿硫的转化反应如下：ＦｅＳ２－ＦｅＳ＋Ｆｅ１－ｘＳ，，转化的数量和深度主要取决于反应温度。２７５℃时磁黄铁矿（Ｆｅ１－ｘＳ）形式为ＦｅＳ１．１０１，４５０℃时为ＦｅＳ１．０８５；有机硫基团中ＰｈＳＨ ，Ｐｈ２Ｓ和四氢噻吩较易脱除，Ｐｈ２Ｓ