Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Simple and versatile operational fractionation of Fe and Zn in dietary products by solid phase extraction on ion exchange resins

A simple and versatile protocol, based on use of solid phase extraction on strong ion exchangers and off-line detection by flame atomic absorption spectrometry, was devised to fractionate iron and zinc in common dietary food and beverages products, i.e., bee honeys, fruit juices and tea infusions. In the procedure proposed, cation exchanger Dowex 50Wx4 and anion exchanger Dowex 1x4 were used separately for distinguishing broadly meant the cationic metal fraction and the fraction of stable anionic metal complexes, respectively, after retention of metal species and their exhaustive elution by means of a 4.0 mol l⁻¹ HCl solution. The third fraction, referred to the residual metal species, was retrieved by difference between total soluble metal contents and sum of metal quantities in separated cationic and anionic fractions. The fractionation pattern observed for both metals was described and discussed.     

PAN共沉淀富集原子吸收测定饮水和人发中的微量锰

使用PAN-Ni(Ⅱ)共沉淀体系分离富集、微量流向进样火焰原子吸收光谱测定饮水和人发中的微量锰。样品中的共存元素不干扰测定，锰的标准加入回收率90%-108%之间。12次重复测定锰含量为0.15μg/mL的试样溶液的变异系数为4.6%,本法简便快捷,取得了较满意的结果.     

基于分子参数的药物小肠吸收预测模型

选择100个化合物作为数据集,随机选取其中80个为训练集,其他分子为验证集,并为每个化合物分子计算了30个参数.通过采用五种不同多元线性回归分析方法对其训练模拟,建立了数学模型,并用验证集检验了所建模型的预测能力.结果发现向后筛选法为最优小肠吸收建模方法.由该法所建模型的统计结果良好(R2>0.80),应用于验证集时也表现出较强预测能力.该模型确定了对小肠吸收影响较大的分子参数,有助于指导进一步的新药筛选和开发.     

Application of Task-specific Ionic Liquids for Intensified Separations

Summary. Ionic liquids offer tremendous opportunities to intensify reactions and separations in process technologies by tuning their physical and chemical properties. Several ionic liquids are suitable for the separation of aromatic and aliphatic hydrocarbons. CO₂ absorption behavior was influenced by the functionalized chains appended to the room temperature ionic liquid (RTIL) cation. Ionic liquids seem able to combine the chemical features of amine solutions with the characteristic advantages of the physical solvents used for CO₂ absorption.     

Application of the microwave acid digestion method to the decomposition of rock samples

The microwave acid digestion method was applied to the decomposition of rock samples and optimum conditions were investigated. Samples of 10–100 mg were decomposed by changing the amount and composition of acid, heating time and number of reheating steps and then the concentrations of Si, Fe, Mn, Na, K and Mg in these samples were measured. The concentrations agreed with reported values when 10 mg of sample were decomposed by heating for 60 s with 0.3 ml of concentrated HNO₃ and 0.1 ml of concentrated HF. Similarly, 100 mg of sample were also decomposed successfully by heating for 45–110 s with 0.3–1.0 ml of concentrated HNO₃ and 0.4–0.7 ml of concentrated HF. It is concluded that the microwave acid digestion method decomposes rock samples with a very short heating time and with small amount of reagents compared with methods using conventional sealed PTFE vessels, which require several hours for the heating step and several millilitres of reagents.     

Pion absorption by16O using realistic interactions—II: Free pion absorption followed by emission of proton

Matrix element of the Gallilean invariant nonrelativistic reduction of the pseudoscalar-pseudovector interaction has been calculated for free pion absorption by a single nucleon inside the nucleus of¹⁶O. The Hartree-Fock wavefunctions obtained with the unitary-model-operator approach starting with the hard-core nucleon-nucleon interaction have been used for the π-capturing nucleon in the initial state. The initial pion distortion in the presence of nuclear field of the absorbing nucleus prior to its absorption together with the Coulomb interaction with the finite nuclear size has been taken into account. The distortion of the emitted proton in the field of the residual nucleus has also been considered. The differential cross-sections have been obtained and calculated results are compared with the previous experimental and theoretical work.     

Trapping Copper Phthalocyanine in a Silica Sono-Xerogel

A copper phthalocyanine (CuPc) has been encapsulated in silica. The trapping effects were studied comparing the UV-Vis absorption spectra of some CuPc solutions and composites prepared under different conditions. The trapped organic molecules’ stability was monitored during the gelation and drying processes. Leachability test have been carried out with the aim of checking the trapping efficiency. Hydrolysis water of pH=2 and a molar ratioR _w =6 mol acid H₂O/mol TMOS leads to a higher CuPc stacking angle homogeneity. The increase of Pc induces a narrower mesopore distribution and helps the stabilization of the composite.     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.