Excess partial molar enthalpies,entropies, Gibbs energies,and volumes in aqueous dimethylsulfoxide

The excess partial molar enthalpies, the vapor pressures, and the densities of dimethylsulfoxide (DMSO)–H₂O mixtures were measured and the excess partial molar Gibbs energies and the partial molar volumes were calculated for DMSO and for H₂O. The values of the excess partial molar Gibbs energies for both DMSO and H₂O are negative over the entire composition range. The results for the water-rich region indicated that the presence of DMSO enhances the hydrogen bond network of H₂O. Unlike monohydric alcohols, however, the solute-solute interaction is repulsive in terms of the Gibbs energy. This was a result of the fact that the repulsion among solutes in terms of enthalpy surpassed the attraction in terms of entropy. The data in the DMSO-rich region suggest that DMSO molecules form clusters which protect H₂O molecules from exposure to the nonpolar alkyl groups of DMSO.     

超声雾化进样微波诱导等离子体原子吸收光谱法测定银的某些影响因素研究

本文将超声雾化技术与MIP-AAS联用,以“L”型吸收管代替“T”型吸收管作为AAS测量的吸收池,采用水冷凝和浓H_2SO_4吸收相结合去溶,研究TUSN-MIP-AAS方法测银时的某些影响因素,讨论了微波前向功率,载气流速、去溶系统、溶液酸度、共存离子及易也离元素等对吸收信号的影响,本法所得的测银的特征浓度为0.01μg/ml(328.1nm)和0.03μg/ml(338.3nm),相对标准偏差为7.5％.     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

微机控制离子色谱仪自动操作与数据处理系统

用转换器和ＩＢＭＰＣ／ＸＴ微机与Ｄｉｏｎｅｘ２０２０ｉ型离子色谱仪连接组成自动控制与数据处理系统，转换器由８０３１及８２５５等芯片组成，其功能是采集数据和转送数据，软件由汇编及Ｃ语言编制。这套新系统增加了注入／记录同步，分级梯度淋洗，自动连续进样等功能以及很强的数据处理能力。     

Determination of L-Dopa and L-Dopamine in Aqueous Solutions Using In-Loop SPME Coupled with LC

A new in-loop solid-phase microextraction (in-loop-SPME) technique, based on an aluminum capillary tube coupled to HPLC, is described for on-line isolation, concentration, and analysis of analytes from aqueous samples. L-Dopa and L-dopamine, in aqueous solutions, were selected as model compounds. The main conditions affecting extraction of the analytes from aqueous samples, desorption, injection, and chromatographic separation were investigated. The method is simple and reproducible. Using the proposed method, reliable determination of L-dopa and L-dopamine at parts-per-billion concentrations was achieved. The calibration plots were linear in the range of 2.5–1500 ng mL⁻¹ with correlation coefficients of 0.999 and 0.998 for L-dopa and L-dopamine, respectively. The detection limits were 0.5–1 ng mL⁻¹ with a relative standard deviation less than 4.1%. Concentration factors more than 100-fold were obtained for these compounds.     

Chemometric approach in optimization of micellar liquid chromatographic separation of some halogenated phenols

Simultaneous optimization of separation quality and analysis time of the micellar liquid chromatography of nine chlorophenol isomers was investigated. The effect on retention of three experimental parameters was studied using multivariate analysis. The factors studied were the concentration of sodium dodecyl sulfate, propanol content and pH of the mobile phase. The experiments were performed according to the face-centred cube central composite design and the inverse form of the experimental retention times for analytes were fitted to the polynomial models. The results of the analysis of variance showed that the models obtained explain greater than 99% of the variance observed in the chromatograms. Good predictive ability of the models was verified as high values of the statistics R² and F were obtained for the linear relationship between predicted cross-validated and experimental values of the dependent variable. The study showed that the use of Pareto-optimality method, an approach from multi-criteria decision-making, allows the selection of the best possible combinations of separation and analysis time in micellar liquid chromatography of chlorophenols.     

Theoretical prediction of the contact distance dependence of the electron transfer reactivity of the ClO/ClO− coupling system

On the basis of the structures and properties of the ClO/ClO^? system obtained at the density functional theory (DFT) (UB3LYP) level, employing the 6‐311+G(3df) standard basis set, the electron transfer reactivity of this system is investigated. The results indicate that there are five possible stable coupling complexes that correspond to the generous minima on the global potential energy surfaces (PES). The most stable coupling complex is planar EC4, in which there is a O? O linkage with two trans‐Cl atoms. Their stabilization energies are calculated to be 20.57 (EC1: C₁), 20.54 (EC2: C₂, ²B), 20.69 (EC3: C₁), 20.70 (EC4: C_s, ²A′), and 20.69 (EC.5: C_2h, ²B_u) kcal/mol at the B3LYP/6‐311+G(3df) level; with the correction of the basis set superposition error (BSSE), the stability order of these encounter complexes is EC4 > EC.5 > EC3 > EC1 > EC2. Based on the five encounter complexes, five coupling modes are designed for the study of the electron transfer reactivity of this system. The dissociation energy curves at the activated states and the corresponding activation energies of these five coupling modes are obtained and are compared at the B3LYP/6‐311+G(3df) and MP2/6‐311+G* levels. The inapplicability of DFT methods has also been discussed in this article in predicting the energy curves, especially with a long contact distance, in which DFT methods give the abnormal behavior for the dissociations of the complexes caused by the “inverse symmetry breaking” problem. On the basis of the golden rule of the time‐dependent perturbation theory, the electron transfer reactivity and the contact distance dependence of the various electron transfer kinetics parameters (e.g., activation energy, coupling matrix element) have been analyzed at the UMP2(full)/6‐311+G* level. The electron transfer can take place over a range of contact distances, but the most effective coupling distance corresponds to only a small range. The coupling orientation analyses also indicate that the most favorable coupling mode to the electron transfer does not always correspond to the most stable encounter complex mechanism. Some highly energetic coupling modes are more favorable for the electron transfer. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

Investigation of Tomato Plant Defence Response to Tobacco Mosaic Virus by Determination of Methyl Salicylate with SPME-Capillary GC-MS

Headspace SPME was applied to investigation of tomato plant defence response to tobacco mosaic virus (TMV) by determination of compounds emitted from tomato plants at the extraction conditions of 25 °C and 15 min. It was found that TMV-inoculated tomato plant released large amount of methyl salicylate (MeSA) as response to TMV and MeSA concentration changed dramatically with time after inoculation. Gaseous MeSA as a signaling compound could induce in surrounding tomato plants to produce salicylic acid (SA) and synthesize and release MeSA. These results show that MeSA might be an airborne plant-signalling molecule in tomato plant response to TMV. The present method provided low detection limit of 2.0 ng L^–1 and needed little sample preparation time (15 min), so the method makes it easy to find the critical times of tomato plant response to TMV by fast determination of MeSA released from tomato plant.     

手性液晶聚硅氧烷毛细管柱的制备及应用

合成了一种手性液晶侧链的聚硅氧烷固定液，并涂制成毛细管柱，此柱适合于分离各种取代基的酚类异构体。对柱效和选择性进行了评价。