ZnMgO/ZnO异质结构中二维电子气的研究

论文根据ZnMgO/ZnO异质结构二维电子气的能带结构及相关理论模型, 采用一维Poisson-Schrodinger方程的自洽求解, 模拟计算了ZnMgO/ZnO异质结构中二维电子气的分布及其对ZnMgO势垒层厚度及Mg组分的依赖关系. 研究发现该异质结构中ZnMgO势垒层厚度存在一最小临界值: 当垒层厚度小于该临界值时, 二维电子气消失, 当垒层厚度大于该临界值时, 其二维电子气密度随着该垒层厚度的增加而增大; 同时研究发现ZnMgO势垒层中Mg组分的增加将显著增强其二维电子气的行为, 导致二维电子气密度的明显增大; 论文对模拟计算获得的结果与相关文献报道的实验结果进行了比较, 并从极化效应和能带结构的角度进行了分析和讨论, 给出了合理的解释. 关键词： 氧化锌 二维电子气 异质结构 理论计算     

Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

Al掺杂四针状ZnO纳米结构的制备及其光致发光和场发射特性

采用热蒸发法成功制备了Al掺杂四针状ZnO纳米结构(T-AZO),利用扫描电子显微镜、X射线衍射仪、荧光光谱仪和场发射测试系统分别研究了不同Al摩尔分数对T-AZO纳米结构表面形貌、微结构、光致发光谱和场发射特性的影响。实验结果表明:T-AZO纳米结构呈现六角纤锌矿结构,Al掺杂对四针状ZnO纳米结构的形貌产生明显影响并且使紫外发射峰产生蓝移。实验中,当Al掺杂摩尔分数为3%时,场发射性能最好,其开启场强为1.33 V/μm,场增强因子为8 420。     

Theoretical calculations of spin-Hamiltonian parameters and defect structures for Cu2+ in trigonally-distorted tetrahedral sites of ZnO and GaN crystals

The spin-Hamiltonian (SH) parameters (g factors g _//, g ⊥ and hyperfine structure constants ⁶³ A _//, ⁶³ A ⊥, ⁶⁵ A _//, ⁶⁵ A ⊥) for Cu²⁺ ions in the trigonally-distorted tetrahedral sites of ZnO and GaN crystals are calculated from a complete diagonalization (of energy matrix) method (CDM) based on a two spin-orbit parameter model for d ⁹ ions in trigonal symmetry. In the method, the Zeeman and hyperfine interaction terms are added to the Hamiltonian in the conventional CDM. The calculated results are in good agreement with the experimental values. The calculated SH parameters are also compared with those using the traditional diagonalization method or perturbation method only within the ² T ₂ term. It appears that, for exact calculations of SH parameters of d ⁹ ions in trigonal tetrahedral clusters in crystals, the present CDM is preferable to the traditional diagonalization method or perturbation method within the ² T ₂ term. The local structures of Cu²⁺ centers (which differ from the corresponding structure in the host crystal) in ZnO : Cu²⁺ and GaN : Cu²⁺ are obtained from the calculations. The results are discussed.     

Indications of bulk property changes from surface ion implantation

In the majority of cases, the effects of ion implantation are confined close to the implant zone but, potentially, the resultant distortions and chemical modifications could catalyse relaxations extending into the bulk substrate. Such possibilities are rarely considered but the present data suggest that high dose ion implantation of ZnO has induced bulk changes. Surface implants with Cu and Tb strongly modified the low temperature bulk thermoluminescence properties generated by X-ray irradiation. Suggestions are proposed for the possible mechanisms for bulk relaxations and structural characteristics, which may indicate where such instability may occur in other lattice structures.     

Zinc oxide nanoparticles reinforced conducting poly(aniline-co-p-phenylenediamine) nanocomposite

Zinc oxide (ZnO) nanoparticles were synthesized by thermal decomposition method and formation of composite with conducting copolymer via in situ chemical oxidative polymerization. Transmission electron microscopy showed that the nanoparticles with an average diameter of 15–25?nm were dispersed in the copolymer matrix. The comonomer molecules were adsorbed on the surface of ZnO particles and then polymerized to form core–shell nanocomposite. The obtained nanocomposite showed a significant improvement in the thermal behavior as indicated by thermogravimetric analysis. The nanocomposite was also confirmed by Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, and X-ray diffraction. Room temperature conductivity of nanocomposite was higher than the value obtained for the pure copolymer. Photocatalytic activity of the nanocomposite was evaluated by measuring the degradation of methylene blue dye under UV irradiation.     

Eu-doped ZnO nanoparticles: Sonochemical synthesis,characterization, and sonocatalytic application

Undoped and europium (III)-doped ZnO nanoparticles were prepared by a sonochemical method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. The crystalline sizes of undoped and 3% Eu-doped ZnO were found to be 16.04 and 8.22 nm, respectively. The particle size of Eu-doped ZnO nanoparticles was much smaller than that of pure ZnO. The synthesized nanocatalysts were used for the sonocatalytic degradation of Acid Red 17. Among the Eu-doped ZnO catalysts, 3% Eu-doped ZnO nanoparticles showed the highest sonocatalytic activity. The effects of various parameters such as catalyst loading, initial dye concentration, pH, ultrasonic power, the effect of oxidizing agents, and the presence of anions were investigated. The produced intermediates of the sonocatalytic process were monitored by GC–Mass (GC–MS) spectrometry.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

氧化锌发光中心的统计力学模型

根据ZnO结构的两种空隙(四面体和多面体),提出了一种发光模型.用统计系综求得了上述两种填隙锌的数量计算公式.     

不同退火温度下氧化锌薄膜可见发光与n型导电研究

采用脉冲激光沉积法在蓝宝石衬底上制备出可见光发光良好的氧化锌薄膜, 在不同的温度下进行了后退火处理. 随着退火温度的升高, 薄膜的可见光发光发生了显著改变, 载流子浓度、迁移率、电阻率也呈现出一定的变化规律. 结合 X射线衍射、扫描电子显微镜、光致发光谱及霍尔测量, 探讨了本征氧化锌薄膜可见光发光的发射机理, 并分析了其 n型导电的原因. 关键词： 氧化锌薄膜 可见光发光 n型导电