Heterogeneous Catalytic Partial Oxidation of C3-C4 Alkanes with Nitrogen Monoxide

The possibility of making products of partial oxidation, alcohols and acids in particular, by the reaction of C₃-C₄ alkanes with nitrogen monoxide over oxide and zeolite catalysts is demonstrated. The most effective catalysts are CeO₂ and Fe-TsVK. The dependence of the rate and selectivity of the process on the reaction conditions has been established.     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

Simple route to secondary amides of phosphorylacetic acids and their use for extraction and sorption of actinides from nitric acid solutions

An efficient method for the synthesis of secondary alkylamides of phosphorylacetic acids (APA) was proposed. The method involves amidation of ethyl phosphorylacetates with primary aliphatic amines. The scope of reaction was determined. Reactions with ethylenediamine and 1,4-diaminobutane yield the corresponding bisamides; in the case of 1,3-diaminopropane, N-(3-aminopropyl)diphenylphosphorylacetamide or N,N-propylenebis(diphenylphosphorylacetamide) was obtained, depending on the reaction conditions. The extraction of americium(III) complexes and the sorption of uranium(VI) by sorbents with physically sorbed APA from nitric acid solutions were studied. There is no correlation between the partition coefficient of americium(III) and the structure of APA; in the sorption of uranium(VI), the degree of extraction depends on the complexone structure.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2394–2402, November, 2004.     

New data on the thermal analysis of diphasic mullite gel

A diphasic mullite gel has been synthesized by using Ludox and Al(NO₃)₃-9H₂O in ammoniacal solution. Both DTA and DDTA studies have been performed with a sensitive differential thermal analyzer system. Besides usual exotherm due to mullite formation, a pronounced exotherm between 800–1300°C has been noted. Considering previous XRD data, it is explained as due to formation of Si-Al spinel phase, which is subsequently transformed exothermally at 1320°C to mullite.     

SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.     

Polyalkoxybenzenes from plant sources 2. Synthesis of isoxazoline analogs of combretastatin from natural allyl(methylenedioxy)methoxybenzenes

A series of analogs of the natural mitostatic agent combretastatin were synthesized by the reaction of nitrile oxides with natural allylbenzenes, such as myristicin, apiol, and dillapiol. The 1,3-dipolar cycloaddition reactions in allylic systems proceed regiospecifically. The reactions with trans isomers of propenylbenzenes, viz., isomyristicin, isoapiol, and isodillapiol, as dipolarophiles produce regioisomers. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2375–2380, December, 2007.     

CHARACTERIZATION AND CATALYTIC PERFORMANCE OF PLATINUM SUPPORTED ON Sn-MgAl_2O_4

IntroductionSupportedPt-Sncatalystsareimpo~inthepdrileumandpthechendcalindustricsbecauseoftheirsuperiorcatalyticperformances.Forexample,Pt-Snsupportedonaneutralsupporthasbeenreportedtoexhibithighdehydrogenationselectivityanddebilitythansupportedplatinumca…     

Synthesis and Electrochemical Studies of Spinel LiNi1−xMnxVO4

Spinel compound LiNi_1−xMn_xVO₄ (0≤x≤0.4) had been prepared by using the moist chemical method. X-ray diffraction spectra showed that the lattice constant increased with x in the LiNi_1−xMn_xVO₄, XPS spectra indicating that Li1s had a chemical shift towards lesser binding energy, and manganese in LiNi_1−xMn_xVO₄ existing as the mixed valence of Mn²⁺ and Mn³⁺. The electrochemical charge and discharge testing at a current density of 0.1 mA/cm² between the potentials of 4.0 and 3.0 V vs Li/Li⁺ in 1 mol/dm³ LiPF₆/EC+DEC (1:1 by volume) at 25°C showed that LiNi_1−xMn_xVO₄ cell has a better rechargeability, but a lower cell voltage of 4.0 V vs Li/Li⁺ than that without the doping sample, and the capacity and the cycle efficiency of the Li/LiNi_1−xMn_xVO₄ cells increased with x in the LiNi_1−xMn_xVO₄.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

Preparation and practical application of spinel pigment Co0.46Zn0.55(Ti0.064Cr0.91)2O4

Synthesis of the green spinel pigment Co_0.46Zn_0.55(Ti_0.064Cr_0.91)₂O₄ by a novel two-step method of preparation have been investigated. Inorganic pigments are almost always prepared by a solid state reaction. It is classical ceramic method which used oxides, hydroxides or carbonates as precursors. The reaction is performed at temperature higher than 1300°C and an agent of mineralization is usually present. The presented novel method of preparation decreases the calcining temperature necessary for reaching of bright and clear hue of the pigments prepared. Main attention was focused on the influence of two types of titanium raw materials on the temperature region of the spinel structure formation and on the colour properties of the pigments. The mixture of precursors with TiO₂ gives a one-phase system when calcining at 1100°C but the colour properties are more interesting at 1150°C. Thermal stability of this pigment is limited by temperature 1300°C. This temperature is connected with partial oxidation of Cr(III) to Cr(VI). Thermal analysis provided the first information about the temperature region of the pigment formation and determined the thermal stability of pigment.