钙钛矿型La_((1 x)/2)Sr_((1-x)/2)Co_(1-x)Cu_xO_3催化CO氧化活性与表征

研究了钙钛矿型LaSrCoCu_xO_3催化剂对CO氧化反应的催化活性及其表面氧的催化作用．结果表明，x＝0．4的催化剂对CO氧化具有最高催化活性，常压及本实验条件下CO完全氧化的最低温度为168℃；催化剂均为氧缺陷化合物，吸附于表面晶格氧缺陷上的吸附氧是CO氧化反应的活性氧物种；并发现催化剂中存在有非常价态的C04 ，认为CO氧化反应是通过吸附氧调变Co3 和Co4 价态而进行．     

Platinum carbonyl derived catalysts on inorganic and organic supports: a comparative study

Fumed silica, silica gel, silica-alumina and cross-linked (5.5%) polystyrene have been functionalized with quaternary ammonium groups and the Chini cluster [Pt₁₂(CO)₂₄]²⁻ has been anchored onto these functionalized materials by ion pairing. A catalyst has also been prepared by the adsorption of Na₂[Pt₁₂(CO)₂₄] on unfunctionalized fumed silica. The catalytic activities of the resultant materials, and that of commercially purchased 5% platinum on alumina have been studied for the hydrogenation of a variety of unsaturated compounds. The substrates studied are: α-acetamidocinnamic acid, cyclohexanone, acetophenone, methyl pyruvate, ethyl acetoacetate, nitrobenzene and benzonitrile. Compared to the polystyrene supported catalyst, the inorganic oxide supported catalysts have higher surface areas and for most of the substrates have notably higher activities. The functionalized fumed silica-based catalyst gives higher conversions than functionalized silica gel and silica-alumina-based catalysts. In the hydrogenation of acetophenone and ethyl acetoacetate, the functionalized fumed silica-based catalyst show superior activity compared to the commercial platinum catalyst, and the catalyst made by conventional adsorption method. In benzonitrile hydrogenation with all the cluster-derived catalysts a hydrazine derivative is selectively formed, but when the commercial platinum catalyst is used benzyl amine is the main product.     

From cyclopentadiene to isoxazoline-carbocyclic nucleosides: a rapid access to biological molecules through nitrosocarbonyl chemistry

A rapid access to carbocyclic nucleosides containing a fused isoxazoline ring is proposed starting from cyclopentadiene. The route involves an hetero Diels-Alder cycloaddition reaction of nitrosocarbonylbenzene followed by a 1,3-dipolar cycloaddition of nitrile oxides, cleavage of the N-O tether and elaboration of the heterocyclic aminols into nucleosides via linear construction of purine and pyrimidine heterocycles.     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

SnO2-Nb2O5/MgAl2O4/α-Al2O3催化环氧乙烷水合制乙二醇

采用水热稳定的MgAl2O4尖晶石对-αAl2O3载体表面进行修饰,采用具有较强亲水性能的SnO2对活性组分Nb2O5进行修饰,制备了SnO2-Nb2O5/MgAl2O4/-αAl2O3催化剂,并用于环氧乙烷水合制乙二醇反应.采用X射线衍射、红外光谱和程序升温脱附研究了Sn/Nb摩尔比对催化剂酸性、环氧乙烷在催化剂表面的吸附状态和吸附强度以及催化剂性能的影响.结果表明,Sn/Nb摩尔比明显影响催化剂的组成和结构;催化剂的结构不同,环氧乙烷在催化剂表面的吸附强度存在明显差别,催化剂的催化性能明显不同.     

Thermal study of CoxZn7-xSb2O12 spinel obtained by pechini method using different alcohols

With the aim of obtaining materials with applications in pigments, Co_xZn_7-xSb₂O₁₂ spinels were synthesized using the Pechini method. This method consists in the formation of a polymeric net, where the metallic cations are homogeneously distributed. In this work, two types of alcohol (ethyl glycol and ethylene glycol) were used for the synthesis of a zinc antimoniate spinel, Co_xZn_7-xSb₂O₁₂ (x=0-7). The materials were characterized by termogravimetry (TG) and differential thermal analysis (DTA). TG results indicated a decrease in total mass loss when cobalt was added to the solution substituting zinc, for samples prepared using the two different alcohols. Decomposition temperatures, obtained by TG and DTA, presented a decreasing behavior as cobalt was added to the material. In relation to the alcohols, all results indicated a better polymerization of the resin when ethylene glycol was used, being the most indicated one for cation immobilization. X-ray diffraction did not show differences between the two alcohols - both presented the spinel phase (Co, Zn)_2.33Sb₀.₆₇O₄. Samples with higher quantity of cobalt also presented ilmenite phase (Co, Zn)Sb₂O₆. This revised version was published online in August 2006 with corrections to the Cover Date.     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

Au/CeO2/Y和Au-MFe2O4催化剂用于有氧条件下CH4还原NOx的研究

以CeO2／Y分子筛和MFe2O4(M=Ni,Co，Zn)为载体，制备Au／CeO2／Y和Au-MFe2O4负载型金催化剂．用CH4做还原剂，考察了它们在有氧条件下催化还原NOχ的活性．结果表明：在Au-Y中引人助剂Ce，使得Au／CeO2／Y的催化活性高于Au／Y；Au-CoFe2O4的催化活性高于Au-Fe2O3，反应温度为300℃时，NOχ在Au-CoFe2O4上的转化率达到39．70%．     

On Mercury(I) Oxo Compounds — Quasi‐Relativistic Computational and Experimental Studies

About 60 molecular species composed of up to 10 mercury atoms and of oxygen atoms and/or of some other elements or groups (such as halogen, OH₂, OH, H, alkali, NO₃) have been investigated quantum chemically. Different density functional approaches and the ab initio SCF‐MP2 method were applied, comparing different basis sets and different atomic core sizes. It is important not to treat the Hg 5s, p, d as inactive core shells, and to use sufficiently many polarization functions. The shape of the 〉O‐Hg‐Hg‐O〈 units is not favorable concerning the formation of lattices composed of Hg^I, O and OH only. Despite its bulkiness, the OHgHgO units can easily come into contact with each other and then disproportionate. This is prevented in the so‐called ternary M‐Hg^I oxides by the embedded oxometallate (oxoacidic) anions. Furthermore, the Hg^I and Hg^II oxide bond energies are less favorable towards the stability of Hg^I oxo compounds, as compared to Hg halidic or oxoacidic compounds. Both points are not promising concerning the search for Hg^I oxides/hydroxides, although the preparation of such compounds, including spacer groups, by topochemical reactions can still not be excluded. So far, experimental efforts towards the synthesis of such a new class of compounds have only demonstrated that Hg^II is strictly preferred over Hg^I in the formation of solids of binary Hg‐O or ternary A‐Hg‐O composition (A = electropositive metal such as alkali, in contrast to M = transition or semi‐metal). This is so even if compounds containing ‘electron rich Hg^δ— atoms’ (i.e. A‐Hg amalgams) are oxidized under mild conditions.     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.