Effect of Surfactant Type and Concentration on Surfactant Migration,Surface Tension,and Adhesion of Latex Films

The effect of surfactant type and concentration on the migration behavior of surfactant in a latex film was investigated. Two types of surfactant, including an anionic (sodium lauryl sulfate, SLS) and a non-ionic (nonylphenol ethoxylate, average number of ethylene oxide units = 40, NP-40) surfactant, were used in an emulsion polymerization of methyl methacrylate butyl acrylate copolymer (MMA–BA). The total amount of surfactant was varied in three levels, i.e., 1.5, 3, and 4.5 wt%, and the surfactants were used both pure and in a mixture state. The surfactant migration to the film–air (F–A) and film–substrate (F–S) interfaces of the latex films was determined by using an attenuated total reflection-Fourier transform infrared (ATR-FTIR) method. In addition, the adhesion of the latex films to glass substrates was measured by a pull-off test. The results showed that the migration of anionic surfactant to the interfaces was greater than the non-ionic one. It was also found that the use of non-ionic surfactant along with anionic surfactant could decrease the migration of the anionic surfactant to the interfaces.     

厚二氧化硅光波导薄膜制备及其特性分析

以硅烷和氧化二氮作为反应气体，采用等离子体增强化学气相沉积(PECVD)技术，不使用掺杂，在单晶硅衬底上制备了用于平面光波导的二氧化硅薄膜。研究了薄膜折射率和淀积速率与工艺参量之间的关系，通过棱镜耦合仪、傅里叶变换红外光谱、原子力显微镜等测试手段，分析了薄膜的结构和光学特性。结果表明，实验能快速生长厚二氧化硅薄膜，薄膜表面平整，颗粒度均匀，同时薄膜具有折射率精确可控和红外透射性能好的特点，非常适合制作光波导器件。     

Edge-wave-driven durable variations in the thickness of the surfactant film and concentration of surface floats

By employing a simple model for small-scale linear edge waves propagating along a homogeneous sloping beach, we demonstrate that certain combinations of linear wave components may lead to durable changes in the thickness of the surfactant film, equivalently, in the concentration of various substances (debris, litter) floating on the water surface. Such changes are caused by high-amplitude transient elevations that resemble rogue waves and occur during dispersive focusing of wave fields with a continuous spectrum. This process can be treated as an intrinsic mechanism of production of patches in the surface layer of an otherwise homogeneous coastal environment impacted by linear edge waves.     

环形线负载驱动变曲率反射镜技术

从薄板弹性理论出发,对可实现曲率变化的环形线负载驱动模型进行分析,给出了基于该模型的大镜厚比变曲率反射镜的形变方程.以较小的驱动力实现较大的中心形变为目标,利用MATLAB软件对不同反射镜厚度、驱动环半径下的反射镜形变情况进行模拟计算,结果表明,反射镜厚度范围在2~4 mm之间、驱动环半径数值在反射镜有效半径1/2处最佳.以此为依据,设计并研制了口径为100 mm、厚度为3 mm的铍青铜环形线负载驱动变曲率反射镜结构及原型样片,给出了变曲率反射镜整体结构前10阶的振动模态分析结果.完成装配后,反射镜原型样片的面形精度接近λ/30(λ为波长).对该结构进行极限曲率变化和面形精度保持的验证实验,通过对变曲率反射镜结构进行改进,环形线负载驱动能够实现超过30个波长(632.8 nm)的中心形变,且面形精度的变化与反射镜中心矢高的变化呈弱相关.     

Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

一种新型叠层光敏全息记录软片

通过化学反应，在三醋酸纤维素睛基的正反两面同时生成具有感光活性的光敏层的方法，获得了一种具有叠层光敏性的全息记录软片：重铬酸盐－三醋酸纤维素酯。由该软片记录的叠层体积全息光栅，具有迄今为止，最高的一级实验衍射效率（５４％）。     

Nd:YAG laser synthesis of nanostructural V2O5 from vanadium oxide sols: Morphological and structural characterizations

Vanadium oxide thin films were prepared by sol-gel method, then subjected to Nd:YAG laser (CW, 1064 nm) radiation. The characteristics of the films were changed by varying the intensity of the laser radiation. The nanocrystalline films were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). XRD revealed that above 102 W/cm² the original xerogel structure disappears and above 129 W/cm² the films become totally polycrystalline with an orthorhombic structure. From TEM observations, we can see that due to laser radiation, the originally fibrillar-like particles disappear and irregular shaped, layer structured V₂O₅ particles are created. From XPS spectra we can conclude that due to laser radiation the O/V ratio increased with higher intensities.     

Optimization of facet coating for highly strained InGaAs quantum well lasers operating at 1200 nm

The optical output power of a laser diode can be enhanced by anti-reflection (AR) and high-reflection (HR) facet coatings, respectively, at the front and back facet. AR and HR coatings also serve the purpose of protection and passivation of laser diode facets. In this work, we have designed and optimized a single layer λ/4 thick Al₂O₃ film for the AR coating and a stack of λ/4 thick Al₂O₃/λ/4 thick Si bi-layers for the HR coating for highly strained InGaAs quantum-well edge emitting broad area (BA) laser diodes. Effect of the front and back facet reflectivities on output power of the laser diodes has been studied. The light output versus injected current (L–I characteristics) measurements were carried out on selected devices before and after the facet coatings. We have also carried out the numerical simulation and analysis of L–I characteristics for this particular diode structure. The experimental results have been compared and verified with the numerical simulation.     

相变域硅薄膜材料的光稳定性

采用RF-PECVD技术，通过改变反应气体的硅烷浓度制备了一系列不同晶化率不掺杂的硅薄膜材料，研究了工艺变化对材料结构的影响及材料光电特性同微结构的关系.随后进行了光衰退试验，在分析光照前后光电特性变化规律的基础上，认为材料中的非晶成分是导致材料光电特性衰退的主要原因.在靠近过渡区非晶一侧的硅材料比普通非晶硅稳定，衰退率较少；高晶化率微晶硅材料性能稳定，基本不存在光衰退；在靠近过渡区微晶一侧的硅材料虽然不是完全不衰退，但相比高晶化率硅材料来说更适合制备高效微晶硅电池. 关键词： 射频等离子体增强化学气相沉积 硅薄膜 Staebler-Wronski(SW)效应 稳定性     

薄膜光学常数的模拟退火算法研究

在薄膜的光学参数拟合时，操作者给定的模型初值对拟合结果有很大的关系。采用广泛用于求解复杂系统优化问题的模拟退火算法来求解薄膜光学常数，降低了操作者给定拟合模型初值的要求。通过对常规的模拟退火算法以及非常快速的模拟退火方法(Very Fast Stimulated Annealing，VFSA)分析，针对性地在模型扰动及退火计划上存在的缺陷作了改进，提高了VFSA算法的计算稳健性。通过大量的拟合实践，验证了提出的改进模拟退火方法的有效性。