锌与小儿神经系统及代谢性疾病

综述了锌在小儿神经系统疾病和内分泌代谢性疾病中的作用及临床意义，尤其是对癫痫的发病起重要作用，大量资料证明高锌与癫痫发作有关，其血锌值明显高于健康儿童，因此在治疗中不要轻易补锌。还综述了锌与智能发育障碍、生长发育障碍、多动症、胎儿畸形、遗传性感音神经性聋等疾病的关系及在治疗糖尿病、肝豆状核变性等内分泌和代谢性疾病时要注意维持锌的正常动态平衡。     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

Sonoelectroanalysis: investigation of bismuth-film-modified glassy carbon electrodes

Bismuth-modified glassy carbon electrodes have been investigated for their suitability in sonoelectroanalysis. The stability of the bismuth film to the application of ultrasound was assessed via voltammetric and atomic force microscopy (AFM) studies which revealed little ablation at powers up to an intensity of 130 W cm^–2 delivered from a 25-kHz sonic horn. Furthermore, bismuth-film-modified glassy carbon electrodes were evaluated for the sonoelectroanalytical quantification of zinc and cadmium. Detection limits of 2×10^–7 M and 6×10^–9 M respectively were found after a 60-s deposition time via an acoustically assisted deposition protocol.     

高血压类风湿症疗效与锌,钙关系初探

以临床典型病案为例，探讨了中医中药传统理论和现代微量元素研究的关系，重点讨论了向量元素锌、宏量元素钙与高血压、风湿症的病因病机和治疗关系。     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Phosphaniminato-Komplexe von Cobalt und Zink mit Heterocubanstruktur. Die Kristallstrukturen von [CoI(NPMe3)]4 und [ZnI(NPMe3)]4

Phosphoraneiminato Complexes of Cobalt and Zinc with Heterocubane Structure. Crystal Structures of [CoI(NPMe₃)]₄ and [ZnI(NPMe₃)]₄ The title compounds have been prepared from CoI₂ and ZnI₂, respectively, and Me₃SiNPMe₃ by fusion reactions at 180°C in the presence of sodium fluoride. They crystallize from dichloromethane as dark green (Co) or colourless (Zn) single crystals including three molecules CH₂Cl₂ per formula unit, which were characterized by crystal structure determinations. [CoI(NPMe₃)]₄ · 3 CH₂Cl₂: Space group P3m1, Z = 2, structure solution with 2376 independent reflections, R = 0.033. Lattice dimensions at ?50°C: a = b = 1455.8, c = 1270.5 pm. [ZnI(NPMe₃)]₄ · 3 CH₂Cl₂: Space group P3m1, Z = 2, structure solution with 2197 independent reflections, R = 0.043. Lattice dimensions at ?60°C: a = b = 1454.9, c = 1270.5 pm. Both complexes are isostructural with one another. They form heterocubane structures in which the metal atoms are linked via μ₃-N-bridges of the phosphoraneiminato groups with M₄N₄ bridge-type bond angles close to 90°.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

1,9-Bis(N,N-dimethylaminomethyl)dipyrromethanes in the synthesis of porphyrins bearing one or two meso substituents

A synthesis of 5,15-disubstituted zinc-porphyrins has been developed that employs condensation of a 1,9-bis(N,N-dimethylaminomethyl)dipyrromethane+a dipyrromethane in refluxing ethanol containing zinc acetate followed by oxidation with DDQ. The N,N-dimethylaminomethylation of the dipyrromethane was achieved via Eschenmoser's reagent (N,N-dimethylmethyleneammonium iodide) in CH₂Cl₂ at room temperature. The synthesis is compatible with diverse substituents (e.g., alkyl, aryl, ester, acetal) and enables rapid synthesis of trans-AB-, A₂-, and A-porphyrins. The synthesis of >40 zinc porphyrins has been surveyed; 13 zinc porphyrins were isolated in yields of 5-20% without detectable scrambling.     

One-step deprotonation route to zinc amide and ester enolates for use in aldol reactions and Negishi couplings

Simple amides and esters are conveniently deprotonated by Zn(tmp)₂ (tmp = 2,2,6,6-tetramethylpiperidinyl anion) to generate Zn enolates. Enolates formed by this method are suitable for use in aldol reactions that tolerate base-sensitive functional groups. Additionally, the Zn enolates are readily coupled with aryl bromides using typical Pd-catalyzed coupling methods.