β‐Peptidic Secondary Structures Fortified and Enforced by Zn2+ Complexation – On the Way to β‐Peptidic Zinc Fingers?

The correlation between β²‐, β³‐, and β^2,3‐amino acid‐residue configuration and stability of helix and hairpin‐turn secondary structures of peptides consisting of homologated proteinogenic amino acids is analyzed (Figs. 1–3). To test the power of Zn²⁺ ions in fortifying and/or enforcing secondary structures of β‐peptides, a β‐decapeptide, 1 , four β‐octapeptides, 2 – 5 , and a β‐hexadecapeptide, 10 , have been devised and synthesized. The design was such that the peptides would a) fold to a 14‐helix ( 1 and 3 ) or a hairpin turn ( 2 and 4 ), or form neither of these two secondary structures (i.e., 5 ), and b) carry the side chains of cysteine and histidine in positions, which will allow Zn²⁺ ions to use their extraordinary affinity for RS^? and the imidazole N‐atoms for stabilizing or destabilizing the intrinsic secondary structures of the peptides. The β‐hexadecapeptide 10 was designed to a) fold to a turn, to which a 14‐helical structure is attached through a β‐dipeptide spacer, and b) contain two cysteine and two histidine side chains for Zn complexation, in order to possibly mimic a Zn‐finger motif. While CD spectra (Figs. 6–8 and 17) and ESI mass spectra (Figs. 9 and 18) are compatible with the expected effects of Zn²⁺ ions in all cases, it was shown by detailed NMR analyses of three of the peptides, i.e., 2, 3, 5 , in the absence and presence of ZnCl₂, that i) β‐peptide 2 forms a hairpin turn in H₂O, even without Zn complexation to the terminal β³hHis and β³hCys side chains (Fig. 11), ii) β‐peptide 3 , which is present as a 14‐helix in MeOH, is forced to a hairpin‐turn structure by Zn complexation in H₂O (Fig. 12), and iii) β‐peptide 5 is poorly ordered in CD₃OH (Fig. 13) and in H₂O (Fig. 14), with far‐remote β³hCys and β³hHis residues, and has a distorted turn structure in the presence of Zn²⁺ ions in H₂O, with proximate terminal Cys and His side chains (Fig. 15).     

1,9-Bis(N,N-dimethylaminomethyl)dipyrromethanes in the synthesis of porphyrins bearing one or two meso substituents

A synthesis of 5,15-disubstituted zinc-porphyrins has been developed that employs condensation of a 1,9-bis(N,N-dimethylaminomethyl)dipyrromethane+a dipyrromethane in refluxing ethanol containing zinc acetate followed by oxidation with DDQ. The N,N-dimethylaminomethylation of the dipyrromethane was achieved via Eschenmoser's reagent (N,N-dimethylmethyleneammonium iodide) in CH₂Cl₂ at room temperature. The synthesis is compatible with diverse substituents (e.g., alkyl, aryl, ester, acetal) and enables rapid synthesis of trans-AB-, A₂-, and A-porphyrins. The synthesis of >40 zinc porphyrins has been surveyed; 13 zinc porphyrins were isolated in yields of 5-20% without detectable scrambling.     

One-step deprotonation route to zinc amide and ester enolates for use in aldol reactions and Negishi couplings

Simple amides and esters are conveniently deprotonated by Zn(tmp)₂ (tmp = 2,2,6,6-tetramethylpiperidinyl anion) to generate Zn enolates. Enolates formed by this method are suitable for use in aldol reactions that tolerate base-sensitive functional groups. Additionally, the Zn enolates are readily coupled with aryl bromides using typical Pd-catalyzed coupling methods.     

消旋的有机二磺酸三邻菲咯啉锌配合物(英)

Compound [Zn(phen)₃][BDA] (1) (BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, phen= 1,10-phenanthroline) composes of the anion part (racemic-(R,S)-6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate ) and the cation part which consists of a racemic octahedrally coordinated zinc center defined six nitrogen atoms from three phen rings to form an inorganic chirality that can be resolution by chiral organic ligand, the 3D framework was formed through the strong H-bonding interaction between sulfonate and water. CCDC: 277924.     

CO2选择性氧化甲烷制C2烃催化剂La2O3/ZnO的氧化还原和CO2吸附性能

Ｌａ２Ｏ３／ＺｎＯ催化剂体系在以二氧化碳作为氧化剂的甲烷氧化偶联反应中具有很高的Ｃ２烃选择性和稳定性．采用ＣＯ２－ＴＰＤ－ＭＳ和ＴＰＲ技术考察了Ｌａ２Ｏ３／ＺｎＯ对ＣＯ２的吸附性质及其氧化还原行为．结果表明：（１）Ｌａ２Ｏ３／ＺｎＯ催化剂体系存在着强、弱两种碱中心，其中弱碱中心数量随样品中Ｌａ２Ｏ３含量增加而减少，强碱中心强度随样品中Ｌａ２Ｏ３含量增加而增强．（２）由于组分相互作用，高温下，Ｌａ２Ｏ３／ＺｎＯ易产生晶格氧空位，使之对ＣＯ２的吸附增强，吸附后的ＣＯ２与晶格氧作用形成立方晶型Ｌａ２Ｏ２ＣＯ３．（３）Ｌａ２Ｏ３／ＺｎＯ表面的Ｌａ３＋和Ｚｎ２＋可以部分被还原，由于组分间的相互作用，使得二者的还原都较单一组分存在时更难．（４）Ｈ２－ＣＯ２－Ｈ２氧化还原循环实验表明，Ｌａ２Ｏ３／ＺｎＯ表面被部分还原后，ＣＯ２可以将部分被还原的表面再氧化．在此基础上对Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷与ＣＯ２转化为Ｃ２烃的机制也进行了讨论．     

Synergistic effect of combination of Irganox 1010 and zinc stearate on thermal stabilization of electron beam irradiated HDPE/EVA both in hot water and oven

Thermo-oxidative stability of HDPE/EVA blends can be considerably increased by combination of a high-molecular weight phenolic antioxidant and zinc stearate. In this work, the post-irradiation thermal stability of HDPE/EVA blends has been studied. High-density polyethylene and its blends with ethylene-vinylacetate copolymer in both pure form and mixed with Irganox 1010 and zinc stearate were exposed to electron beam radiation at doses between 80 and 150 kGy, at room temperature, in air. In order to evaluate the thermal stability of the samples, post-irradiation heat treatments were done in both hot water bath at 95 °C and in an oven at 140 °C. The mechanical properties and changes in the chemical structure were determined during thermal aging in hot water and oven. The gel content was enhanced by increasing EVA concentration in all applied doses. The stabilized blends have lower gel content than the unstabilized samples. From the results of heat aging treatments it was observed that the thermal stability of the unstabilized blend samples was lower than HDPE. Thermal stability of the samples has been improved by incorporation of Irganox 1010 and zinc stearate. Formation of hydroxyl group was insignificant for stabilized samples during heat aging in both conditions. Also, the changes in the value of oxidation induction time (OIT) for the stabilized samples were negligible after prolonged immersion in hot water.     

Exploiting flow injection and sequential injection anodic stripping voltammetric systems for simultaneous determination of some metals

Flow injection (FI) and sequential injection (SI) systems with anodic stripping voltammetric detection have been exploited for simultaneous determination of some metals. A pre-plated mercury film on a glassy carbon disc electrode was used as a working electrode in both systems. The same film can be repeatedly applied for at least 50 analysis cycles, thus reducing the mercury consumption and waste. A single line FI voltammetric system using an acetate buffer as a carrier and an electrolyte solution was employed. An injected standard/sample zone was mixed with the buffer in a mixing coil before entering a flow cell. Metal ions were deposited on the working electrode by applying a potential of −1.1 V vs Ag/AgCl reference electrode. The stripping was performed by anodically scanning potential of working electrode to +0.25 V, resulting a voltammogram. Effects of acetate buffer concentration, flow rate and sample volume were investigated. Under the selected condition, detection limits of 1 μg l⁻¹ for Cd(II), 18 μg l⁻¹ for Cu(II), 2 μg l⁻¹ for Pb(II) and 17 μg l⁻¹ for Zn(II) with precisions of 2–5% (n=11) were obtained. The SI voltammetric system was similar to the FI system and using an acetate buffer as a carrier solution. The SI system was operated by a PC via in-house written software and employing an autotitrator as a syringe pump. Standard/sample was aspirated and the zone was then sent to a flow cell for measurement. Detection limits for Cd(II), Cu(II), Pb(II) and Zn(II) were 6, 3, 10 and 470 μg l⁻¹, respectively. Applications to water samples were demonstrated. A homemade UV-digester was used for removing organic matters in the wastewater samples prior to analysis by the proposed voltammetric systems.     

Organically pillared layered zinc hydroxides

The two organically pillared layered zinc hydroxides [Zn₂(OH)₂(ndc)], CPO-6, and [Zn₃(OH)₄(bpdc)], CPO-7, were obtained in hydrothermal reactions between 2,6-naphthalenedicarboxylic acid (ndc) and zinc nitrate (CPO-6) and 4,4′biphenyldicarboxylate (bpdc) and zinc nitrate (CPO-7), respectively. In CPO-6, the tetrahedral zinc atoms are connected by two μ₂-OH groups and two carboxylate oxygen atoms, forming infinite layers extending parallel to the bc-plane. These layers are pillared by ndc to form a three-dimensional structure. In CPO-7, the zinc hydroxide layers are containing four-, five- and six coordinated zinc atoms, and the layers are built like stairways running along the [001] direction. Each step is composed of three infinite chains running in the [010] direction. Both crystal structures were solved from conventional single crystal data. Crystal data for CPO-6: Monoclinic space group P2₁/c (No. 14), a=11.9703(7), b=7.8154(5), c=6.2428(4) Å, β=90.816(2)°, V=583.97(6) Å³ and Z=4. Crystal data for CPO-7: Monoclinic space group C2/c (No. 15), a=35.220(4), b=6.2658(8), c=14.8888(17) Å, β=112.580(4)°, V=3033.8(6) Å³ and Z=8. The compounds were further characterized by thermogravimetric- and chemical analysis.     

A new polar supramolecular 3D framework [Zn(pyz)(H2O)4]pht

A new Zn(II) complex, [Zn(pyz)(H₂O)₄]pht (1) (pyz=pyrazine; pht=1,2-benzenedicarboxylate) has been hydrothermally synthesized and characterized. Complex 1 features a novel polar 3D framework with a 1D polycationic chain , between which pht²⁻ dianions are encapsulated via the supramolecular interaction. Its powder SHG is of about three times as large as that of KH₂PO₄.     

Synthesis and Characterization of Methylzinc Tri(tert‐butyl)silylphosphanide as well as Related Sodium and Potassium Phosphanylzincates

The reaction of dimethylzinc and tri(tert‐butyl)silylphosphane in toluene yielded dimeric methylzinc tri(tert‐butyl)silylphosphanide ( 1 ) which crystallized tetrameric. Compound 1 was deprotonated with sodium in DME and the solvent‐separated dimeric ion pair [(dme)₃Na]⁺ [(dme)Na(MeZn)₂(μ‐PSitBu₃)₂]^? ( 2 ) was isolated. The reaction of 1 in THF with two equivalents of potassium and one equivalent of tri(tert‐butyl)silylphosphane gave dimeric [{tBu₃Si(H)P}{(thf)₂K}₂(MeZn)(PSitBu₃)]₂ ( 3 ). Both of these phosphanylzincates contain Zn₂P₂ cycles with Zn‐P bond lengths of approximately 237 pm, whereas in 1 larger Zn‐P bond lengths of 248.5 pm were found due to the larger coordination numbers of the phosphorus and zinc atoms.