纳米镍-铁合金/膨胀石墨复合材料的制备、表征及其电磁屏蔽性能

The composites with nano-particles of Ni-Fe alloys dispersed on the nano-layers of expanded graphite (EG) were prepared by the impregnation of EG with ethanol solutions of nickel and iron acetates， followed by drying and reduction in H₂. The square nano-particles of Ni-Fe alloys with particle sizes of mainly 20～40 nm were found to be well spread on the layers of EG. The alloy nano-particles exhibited high shielding effectiveness (SE) for electromagnetic radiations at low frequencies due to their high magnetic conductivity. Since EG is electronically conductive and displayed high SE at high frequencies， the composites exhibited good SE at wide range of frequencies. The electric and magnetic conductivities of the composites could be monitored through regulating the loadings of alloy nano-particles on EG， and it was found that the composites with 20%～40% of the alloys exhibited good SE. Specifically， the composite 27%Ni-3%Fe-EG showed the excellent SE from 66 to 110 dB at the frequencies from 300 kHz to 1.5 GHz.     

流动注射在线萃取-火焰原子吸收法测定食用盐中的锌

基于锌与 1 (2 吡啶偶氮 ) 2 萘酚 (简称PAN)形成的配合物可被氯仿萃取 ,从高盐基体样品中分离富集锌 ,利用自行设计的分相器 ,实验确定了最佳的流动注射在线萃取 火焰原子吸收光度法测定锌的流路系统和化学反应条件。在选定的工作条件下 ,其RSD和检出限分别为 4 3 % (c=0 6 μg/mL ,n =1 1 )和0 0 3 μg/mL ,测定速度为 2 5样 /h。用于实际样品的测定 ,加标回收率为 97%～1 0 6 %。     

Voltammetric, chronocoulometric and spectroelectrochemical studies of electropolymerized films based on Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine: effect of high pH

Electropolymerized thin films of Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine, immersed in solutions of relatively high pH, have been studied electro- and spectroelectrochemically. Cyclic voltammetry and chronocoulometry were used to characterize films deposited on glassy carbon electrodes. Spectroelectrochemistry and ellipsometry measurements were performed on indium tin oxide (ITO) surfaces coated with the zinc and cobalt complexes and correlated to the electrochemical information collected using glassy carbon electrodes. Studies at high pH are motivated by the efficient increase in luminol chemiluminescence at high OH⁻ concentration, and by potential application in luminescence sensors. Although the films are not removed, some structural changes occur when they are exposed to solutions of high pH. In addition, an estimation of the number of monolayers has also been calculated. The atomic diameters of cobalt and zinc are very close in value, but the estimated number of monolayers, based on cyclic voltammetric data, for a given number of electropolymerization cycles is approximately four-fold higher in the zinc-based film. This would correspond to three-fold thicker films when zinc is the central metal ion. Ellipsometry measurements have been correlated with cyclic voltammetric data to confirm that film thickness varies among the different complexes, even though the conditions of electropolymerization are the same.     

高电导率的a—SiHY合金的低温电导特性

用射央求地在硅单晶衬底上沉积出电导率高达６０Ｓ／ｃｍ的ａ－ＳｉＨＹ合金薄膜。在２０－３００Ｋ，对于钇含量高的样品，其电导仍是热激活的。ｌｇσ与１／Ｔ的关系曲线能够被拟合成斜率不同的两条直线，直线的斜率和两直线间拐点所地 温度依赖于膜中钇的含量。但对钇含量低的薄膜，电导对温度的依赖关系度为σ∝ｅｘｐ（－１／Ｔ＾１／４）。结果表明，这些钇含量不同的样品在没的温度范围内具有不同的导电机制。     

珠海市儿童发锌调查报告

作者调查了珠海市568名0～6岁健康儿童的发锌含量，结果表明，集体儿童的低锌发生率为59．1％，门诊儿童为72．04％，在珠海市儿童中低锌有较高的发生率。     

Solvothermal synthesis of an open-framework zinc chlorophosphate, [C8N4H26][Zn3Cl(HPO4)3(PO4)], with a layer structure

A solvothermal reaction of ZnO, HCl, H₃PO₄, and N,N′(3-bisaminopropyl)-1,2-ethylenediamine (BAPEN) in diethyleneglycol at 160°C yields a new zinc chlorophosphate, [C₈N₄H₂₆][Zn₃Cl(HPO₄)₃(PO₄)], I. The structure comprises ZnO₄, ZnO₃Cl, HPO₄ and PO₄ tetrahedral units connected through their vertices giving rise to a layered structure with 10-membered apertures. The position of the Zn and P atoms gives rise to double-four ring like building unit with one Zn missing. The fully protonated amine molecules occupy the inter-lamellar region and interacts with the framework through N-H?O hydrogen bonds. Crystal data: M=792.85, orthorhombic, space group=Pca2₁ (no. 29), a=9.8410(2), b=15.0912(2), c=16.1220(4) Å, V=2394.32(8) Å³, Z=4, ρ_calc=2.199 g cm⁻³, μ(MoKα)=3.443 mm⁻¹, R₁=0.0520, wR₂=0.1256 and S=1.054.     

LaNi4.7Al0.3单颗粒微电极电化学行为的研究

报道了一种单颗粒微电极制备新方法, 并研究了LaNi4.7Al0.3球形单颗粒微电极的电化学行为.     

电感耦合等离子体发射光谱测定稀土铝合金中稀土和非稀土元素

本工作用 ICP-AES 法测定稀土-6063变形铝合金中 La、Ce、Pr、Nd、Sm、Gd、Fe、Mg、Ti、Zn,Cu 和 Mn,本方法不用化学分离,可一次同时测定这些元素,并做了 ICP光源参数、基体量变化、酸度(HCl)变化、稀土总量变化、共存元素 Fe 和 Mg 量的变化对被测元素的影响。本方法速度快、准确度高(除 Cu 稍差)。回收率91.0～110.0%,相对标准偏差±1.4～8.0%。     

Zn—TppS4极谱络合物吸附波的研究：中草药天麻,川芎,当归中锌的测定

锌是人体必需的微量元素之一。它具有重要的生理功能和营养作用,是合成脱氧核糖核酸(DNA),核糖核酸(RNA)和蛋白质必需的金属离子。锌是DNA,RNA聚合酶等80多种酶的组成成分及激剂,直接影响细胞代谢,免疫过程,细胞分裂和再生。最近美国有人提出缺     

Ni-B和Ni-Ce-B超细非晶态合金的退火晶化及其催化性能

 采用XAFS,XRD和DTA方法研究了Ni－B和Ni－Ce－B超细非晶态合金在退火过程中的结构变化及其结构与催化性能的关系．活性结果表明,在退火温度为623K时,Ni－B和Ni－Ce－B样品的苯加氢催化反应转化率最高,分别为63％和81％,0．3％Ce的掺入提高了Ni－Ce－B的催化活性．DTA结果表明,Ni－B超细非晶态合金在598和653K有两个晶化峰,而Ni－Ce－B样品有548,603,696和801K四个晶化峰．XAFS和XRD结果进一步说明,在573K退火时,Ni－B样品晶化生成晶态Ni3B和纳米晶Ni,此时Ni－Ce－B仅有少量晶态Ni3B生成．在673K退火时,Ni－B样品中的Ni3B开始分解生成晶态Ni,同时纳米晶Ni聚集并形成大颗粒晶态Ni,而Ni－Ce－B样品晶化生成晶态Ni3B和纳米晶Ni．在773K和更高的温度退火处理后,Ni－B样品中Ni的局域环境结构与金属Ni箔基本一致,但Ni－Ce－B样品晶化生成的Ni晶格有较大畸变,同时Ni3B并未分解．说明0．3％的Ce对提高Ni－Ce－B样品的稳定性有显著作用．本文首次报道了Ni－B和Ni－Ce－B超细非晶态合金中苯加氢催化活性中心为纳米晶Ni和类似于金属Ni的Ni－B非晶态合金．