二氧化碳与丙烯直接合成甲基丙烯酸用CuPMo／TiO2催化剂的研究

 用溶胶－凝胶法以磷钼酸（MPA）的铜盐溶液水解钛酸四丁酯制备了CuPMo／TiO2催化剂，并用ICP，XRD，TG－DTA，IR，TPD－MS和微反技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化性能．结果表明：杂多钼酸盐与TiO2表面通过O2－桥发生键联．在623K下，杂多阴离子仍保持其原有的Keggin结构；CO2在Lewis酸位Cu（Ⅱ）和Lewis碱位Cu－O－Mo桥氧的协同作用下形成卧式吸附态Cu（Ⅱ）←O－（CO）←（O－－Cu）；丙烯以分子吸附态在催化剂上吸附；在空速1500h－1，压力1MPa和温度563K的反应条件下，丙烯的转化率为4．2％，甲基丙烯酸的选择性为96％．     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

The gas phase reaction between CO2 and lanthanide atoms. A test of a model for the isokinetic effect

Summary Co₃O₄, NiCo₂O₄ and LaCo₂O₄catalysts were synthesizedby the citric acid-ligated method. These catalysts containing Co-oxide active components can largely lower the temperature of soot combustion under tight contact conditions. Under the conditions of loose contact NiCo₂O₄ cannot promote soot combustion, but LaCo₂O₄ can effectively promote soot combustion because the nanometric perovskite-type catalyst LaCoO₃produced in the LaCo₂O₄sample.</o:p>     

PrCl3催化漆酚干燥成膜的研究

Pr原子特殊的电子层结构使其具有多方面的催化特性．实验发现质量分数为0．7％的PrCl3就可使漆酚(U)于110℃固化成膜的时间从5h降低到1h．用可见分光光度法、电子能谱、紫外和红外光谱等方法研究U在PrCl3作用下的固化成膜历程．结果表明，在Pr(Ⅲ)催化U聚合的过程中首先是U与PrCl3发生配位作用，生成U镨配合物(UPr)，然后该配合物分子中的Pr(Ⅲ)催化U聚合成体形结构的高分子化合物．     

SO42-/Zr-ZSM-5 超强酸催化剂的制备和表征

以硅溶胶和氧氯化锆为硅源和锆源，采用水热合成的方法制得具有ZSM-5结构的Zr-Si分子筛；用0.5mol/L的硫酸处理该分子筛，并在550℃焙烧，制得具有ZSM-5结构的SO4^2-/ZrO2-SiO2分子筛型的固体超强酸。采用XRD、SEM、TG、IR、NH3-PHD和指示剂法对其结构和酸性进行表征。结果表明，该SO4^2-/ZrO2-SiO2具有ZSM-5结构和超强酸性，其酸强度大于-13.75，且具有良好的热稳定性。     

SMSI effect on ceria supported Cu-Pd catalysts in the hydrogenation of 1,3-butadiene

Ceria-supported copper-palladium catalysts have been tested in the hydrogenation of 1,3-butadiene. The SMSI behavior of the bimetallic catalysts depended on the temperature of reduction. They were analyzed by H₂ chemisorption and XPS.     

Strong influences of cocatalyst on ethylene/propylene copolymerization with a MgCl2/SiO2/TiCl4/diester type Ziegler-Natta catalyst

Using triethylaluminum (TEA), triisobutylaluminum (TIBA) or TEA/TIBA mixtures of molar ratio 75/25, 50/50 and 25/75 as the cocatalyst, five different ethylene-propylene copolymer samples were synthesized by a MgCl₂/SiO₂/TiCl₄/diester type Ziegler-Natta catalyst in a slurry polymerization process. The synthesized copolymers are strongly heterogeneous in chain structure and were fractionated into part of nearly random copolymer and part of segmented copolymer. Both polymerization activity and copolymer structure were found to be markedly changed when the cocatalyst was changed from TEA to TEA/TIBA mixtures or pure TIBA. As the content of TEA in cocatalyst increases, yield of the random part of product increases and the yield of the crystalline segmented copolymer part decreases. There is also a decrease in ethylene content of the whole product with increasing TEA amount. Copolymerization behaviors of the TEA/TIBA mixture activated catalysis systems are not simple superposition of those activated by pure TEA and TIBA. When a 50/50 TEA/TIBA mixture was used as cocatalyst, the copolymerization activity became the highest, and yields of both the random copolymer part and the segmented copolymer part are close to the highest level. On the other hand, both parts of the copolymer produced with a 50/50 TEA/TIBA mixture are relatively more blocky than the products of TEA or TIBA systems, and difference in ethylene content between the random part and the segmented part was the smallest. The segmented copolymer part of three typical samples was further fractionated by temperature-gradient extraction fractionation into fractions of different ethylene content and sequence distribution. Changing TEA content in the cocatalyst exerted strong influences also on the fraction distribution of the segmented part of copolymer.     

Nd（P_（507））_3－Al（i－Bu）_3催化马来酸酐与环氧丙烷开环交替共聚

本文研究了马来酸酐和环氧丙烷交替共聚，发现Ｎｄ（Ｐ_（５０７））_３－Ａｌ（ｉ－Ｂｕ）_３是马来酸酐（ＭＡｎ）和环氧丙烷（ＰＯ）交替共聚的良好催化剂，并用红外光谱，核磁共振谱研究了共聚物的结构。