High-throughput isotherm determination and thermodynamic modeling of protein adsorption on mixed mode adsorbents

The thermodynamic modeling of protein adsorption on mixed-mode adsorbents functionalized with ligands carrying both hydrophobic and electrostatic groups was undertaken. The developed mixed mode isotherm was fitted with protein adsorption data obtained for five different proteins on four different mixed mode adsorbents by 96-well microtitre plate high throughput batch experiments on a robotic workstation. The developed mixed mode isotherm was capable of describing the adsorption isotherms of all five proteins (having widely different molecular masses and iso-electric points) on the four mixed mode adsorbents and over a wide range of salt concentrations and solution pH, and provided a unique set of physically meaningful parameters for each resin-protein-pH combination. The model could capture the typically observed minimum in mixed mode protein adsorption and predict the precise salt concentration at which this minimum occurs. The possibility of predicting the salt concentration at which minimum protein binding occurs presents new opportunities for designing better elution strategies in mixed mode protein chromatography. Salt-protein interactions were shown to have important consequences on mixed mode protein adsorption when they occur. Finally, the mixed mode isotherm also gave very good fit with literature data of BSA adsorption on a different mixed mode adsorbent not examined in this study. Hence, the mixed mode isotherm formalism presented in this study can be used with any mixed mode adsorbent having the hydrophobic and electrostatic functional groups. It also provides the basis for detailed modeling and optimization of mixed mode chromatographic separation of proteins.     

Ce-EU-1分子筛的合成和表征

采用水热法,以溴化六甲双铵（HMBr2）为模板剂,硅溶胶、偏铝酸钠为硅铝源,以六水硝酸铈为铈源合成了稀土Ce-EU-1分子筛,并通过XRD、FTIR、紫外-可见漫反射光谱、热重分析（TG-DTG）和氮气吸附-脱附等测试手段对合成样品的孔道结构、物化性能及Ce的存在状态进行了表征。XRD结果表明,合成样品不仅具有很高的纯度和结晶度,为典型的立方有序排列的EU-1结构,而且部分Ce已取代Si或Al进入微孔分子筛的骨架。样品的FTIR图谱在980cm-1附近有明显的Si—O—Ce特征吸收峰,证明Ce存在于分子筛的骨架中。紫外-可见漫反射图谱显示,在253nm附近出现O—Ce之间的电子跃迁特征峰,进一步证明了Ce进入了分子筛骨架。氮气吸附-脱附结果表明了Ce的掺入对分子筛的物化性能和孔道结构产生了影响。同时考察了镧系其他金属离子（Ln：La、Nd、Sm和Gd）对EU-1分子筛的影响,发现随着镧系离子半径的减小,Ln-EU-1分子筛的相对结晶度逐渐降低,晶胞体积减小。     

Correlation between the surface free energy of modified and non-modified glasses with controlled porosity and their sorption properties

Summary Contact angles for water and diiodomethane drops were measured on the surface of thermally and chemically (by Carbowax 20M bonding) modified porous glasses and on the surface of naphthalene, diphenyl and anthracene. Using the obtained results to a modified Young equation, dispersion and nondispersion components of the surface free energy of these glasses and organic substances were calculated. The work of adhesion (W_A) for benzene, naphthalene, diphenyl, anthracene, nitrobenzene was estimated and correlated with the capacity factors, (k′) of these substances. On the basis of experimental and calculated data it can be stated that the thermal treatment of porous glasses increases, their hydrophobicity but the Carbowax layer causes hydrophilicity. There is a linear relationship between k′ and W_A which can be helpful for predicting retention data of chromatographed substances on the base of surface free energy which can be calculated from contact angle measurements.     

Quantum chemical investigation of the adsorption of methanol on a cluster model of faujasite

The adsorption of methanol in zeolites of the faujasite type with sodium and calcium counter ions is studied with quantum chemical methods. The zeolite is represented with a cluster model allowing calculations at the Møller-Plesset as well as the DFT level of theory. An adsorption energy of −62.4 kJ/mol is calculated at the MP2/TZVP//BP86/TZVP level of theory for one methanol molecule at one site II sodium cation. Insight into the adsorption process is obtained with a three-body decomposition which reveals a strong destabilisation of the adsorption strength by large, positive three-body terms, which is important for force field development.     

钠改型天然斜发沸石对铵离子的交换性能

对分别来自国内三个产地和澳大利亚的沸石样品进行了铵离子交换性能的研究。在25℃下了样品的交换速率曲线。利用Verrmeulen's模型处理动力学数据，计算得到扩散系数，与文献报道的结果相一致，并发现不同样品的扩散系数与其致密程度相关。将粒度200mesh的沸石分别用三种不同方法聚集为颗粒，并测定了表观的扩散系数，均高于原颗粒的扩散系数，其中凝胶颗粒提高了一个数量级。     

Heterogeneous oxidation of cyclohexanone catalyzed by TS-1:Combined experimental and DFT studies

The reaction mechanism of the oxidation of cyclohexanone catalyzed by titanium silicate zeolite TS-1 using aqueous H2O2 as the oxidant was investigated by combining density function theory (DFT) calculations with experimental studies. DFT calculations showed that H2O2 was adsorbed and activated at the tetrahedral Ti sites. By taking into account the adsorption energy, molecular size, steric hindrance and structural information, a reaction mechanism of Baeyer-Villiger oxidation catalyzed by TS-1 that involves the activation of H2O2 was proposed. Experimental studies showed that the major products of cyclohexanone oxidation by H2O2 catalyzed by a hollow TS-1 zeolite wereε-carprolactone, 6-hydroxyhexanoic acid, and adipic acid. These products were analyzed by GC-MS and were in good agreement with the proposed mechanism. Our studies showed that the reaction mechanism on TS-1 zeolite was different from that on Sn-beta zeolite.     

固体核磁共振研究分子筛的新进展

分子筛由于具有独特的孔道及可调控酸碱性等特征,被作为离子交换剂、吸附剂及催化剂而广泛应用于石油化工的各种催化过程中。固体核磁共振是研究分子筛结构、酸性及主客体相互作用的强有力谱学手段之一。简单概述了固体核磁共振研究分子筛的最近进展。     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响. 以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).