Attachment of neutrals during tandem mass spectrometry of sulfonic acid dyes and intermediates in an ion trap

Several positional isomers of 2-(2-quinolinyl)-1H-indene-1,3(2H)-dione mono- and disulfonic acids prepared as reference materials for development of analytical methods involved in FDA certification of D&C Yellow No. 10 (Quinoline Yellow) were found consistently to show [MH + 14](+) ions when their electrospray- or atmospheric pressure chemical ionization-prepared MH(+) ions were subjected to collisional activation. The source of these ions was found to be the methanol used as solvent in these procedures which combined with their [MH - H(2)O](+) ions under chemical ionization conditions. The reaction was found to be sensitive to their isomeric and chemical structures and other examples of this process are reviewed.     

Use of Experimental Design to Develop a Method for Analysis of 1,3-Dichloropropene Isomers in Water by HS-SPME and GC–ECD

A simple and reliable method has been established for determination of cis and trans-1,3-dichloropropene (1,3-DCP) in water by headspace solid-phase microextraction (HS-SPME) then GC–ECD. An experimental design with two steps was performed to determine the best experimental conditions for extraction of the 1,3-DCP isomers. First, a 2⁶⁻² fractional factorial design was conducted to screen for significant conditions. Second, a central composite design (CCD) was performed to optimise the variables. The best experimental extraction conditions were: polydimethylsiloxane–divinylbenzene (PDMS–DVB)-coated fibre, 20-min extraction time, 12 °C extraction temperature, 300 g L⁻¹ NaCl, and 20 mL headspace volume in 40-mL vial. Under these conditions the method detection limit (MDL) was 0.5 ng L⁻¹ for cis-1,3-DCP and 1.0 ng L⁻¹ for trans-1,3-DCP. The method quantification limit (MQL) was 1.2 ng L⁻¹ for cis-1,3-DCP and 3.0 ng L⁻¹ for trans-1,3-DCP. For both isomers the relative standard deviation (RSD) for analysis of 50 ng L⁻¹ or 0.5 μg L⁻¹ of the isomer mixture was less than 8%. When the proposed method was applied to surface (river) water and tapwater samples from Gipuzkoa province (Spain) the target analytes were not detected. The method was also used to investigate the presence of the isomers in leachates from agricultural soil. A mixed solution was added to samples of two different soils and 1,3-DCP isomers were quantified in leachate obtained from the samples.     

Evaluation of zirconium as a permanent chemical modifier using synchrotron radiation and imaging techniques for lithium determination in sediment slurry samples by ET AAS

In the present paper, lithium was determined in river sediment using slurry sampling and electrothermal atomic absorption spectrometry (ET AAS) after L’vov platform coating with zirconium (as a permanent chemical modifier). The performance of this modifier and its distribution on the L’vov platform after different heating cycles were evaluated using synchrotron radiation X-ray fluorescence (SRXRF) and imaging scanning electron microscopy (SEM) techniques. The analytical conditions for lithium determination in river sediment slurries were also investigated and the best conditions were obtained employing 1300 and 2300 °C for pyrolysis and atomization temperatures, respectively. In addition, 100 mg of sediment samples were prepared using 4.0 mol l⁻¹ HNO₃. The Zr-coating permitted lithium determination with good precision and accuracy after 480 heating cycles using the same platform for slurry samples. The sediment samples were collected from five different points of the Cachoeira river, São Paulo, Brazil. The detection and quantification limits were, respectively, 0.07 and 0.23 μg l⁻¹.     

Square‐Wave Voltammetric Determination of Paraquat at Carbon Paste Electrode Modified with Hydroxyapatite

The voltammetric behavior of paraquat was investigated at hydroxyapatite‐modified carbon paste electrode HAP‐CPE in K₂SO₄. A method was developed for the detection of the trace of this herbicide, based on their redox reaction. The reduction peaks of paraquat were observed around ?0.70 V and ?1.00 V (vs. SCE) in square‐wave voltammetry. Experimental conditions were optimized by varying the accumulation time, apatite loading and measuring solution pH. Calibration plots were linear under the optimized parameters over the herbicide's concentration range 8–200×10^?7 mol L^?1, with a detection and quantification limits about 1.5×10^?8 mol L^?1 and 6.4 10^?8 mol L^?1, respectively.     

Determination of trace metals in Nile River and ground water by differential pulse stripping voltammetry

The determination of trace metals in river water and ground water by DPSV is seriously disturbed by the presence of organic complexes. The influence of these substances can be eliminated by acidification of the samples with acids. Cd, Pb and Cu were determined at pH 1.1 (HNO₃ medium) and Zn, Cd, Pb and Cu at pH 2 (HCl medium), in both the Nile river and ground water. Zn was determined at pH 3.5 in HCl and pH 4.5 in HNO₃, after neutralizing the samples with NH₃/NH₄Cl buffer. Manganese could then be determined, after further addition of ammoniacal buffer solution up to pH 7.5 and 8.5. Ni and Co were determined in the adsorptive mode after formation of dimethylglyoximates at pH 9.2. The effect of pH on the stripping peaks of manganese was studied. Good agreement was observed between DPSV and AAS results for Zn, Cd, Pb, Cu and Mn, but the concentrations of Ni and Co were below the detection limits for AAS. Good agreement was obtained between DPSV results in HCl and HNO₃ for Ni and Co. The results indicate that decomposition of organic complexes by acidification with HNO₃ is better than in the case with HCl for Zn, Pb, Cu, Ni and Co, but HCl is better than HNO₃ for Cd and Mn.     

Sensitive detection of organophosphates in river water by means of a piezoelectric biosensor

A highly sensitive piezoelectric biosensor has been developed for detection of cholinesterase inhibitors. The inhibitor benzoylecgonine-1,8-diamino-3,4-dioxaoctane (BZE-DADOO) was immobilized on a monolayer of 11-mercaptomonoundecanoic acid (MUA) self-assembled on the gold surface of the sensor. The binding of high-molecular-weight cholinesterase to the immobilized cocaine derivative was monitored with a mass sensitive piezoelectric quartz crystal (quartz crystal nanobalance; QCN). In the presence of an inhibiting substance in the sample, the binding of cholinesterase to the immobilized inhibitor was reduced. The decrease of the rate of mass change was proportional to the concentration of free inhibitor in the sample. This way the affinity sensor followed anti-cholinesterase toxicity and the enzyme activity of ChE was not addressed. A assay for detection of organophosphates (OP) was optimized. Regeneration of the sensor surface was achieved with 1 mol L^–1 formic acid, which enabled 40 measurements with one sensor. All assays were carried out in a flow-through arrangement. The total measurement time (binding+regeneration) was 25 min and the detection limit for different OP (paraoxon, diisopropylfluorophosphate, chlorpyriphos, and chlorfenvinphos) was down to 10^–10 mol L^–1 (0.02 g L^–1). This sensor was used for determination of organophosphate (diisopropylfluorophosphate) levels in river water samples.Dedicated to the memory of Wilhelm Fresenius     

Utilization of electrodeposition for electrothermal atomic absorption spectrometry determination of gold

Gold was determined by electrothermal atomic absorption spectrometry after electrochemical preconcentration on the graphite ridge probe used as a working electrode and sample support. The probe surface was electrochemically modified with Pd, Re and the mixture of both. The electrolysis of gold was performed under galvanostatic control at 0.5 mA. Maximum pyrolysis temperature for the probe surface modified with Pd was 1200 °C, with Re 1300 °C. The relative standard deviation for the determination of 2 μg l^− 1 Au was not higher than 5.6% (n = 8) for 2 min electrodeposition. The sensitivity of gold determination was reproducible for 300 electrodeposition and atomization cycles. When the probe surface was modified with a mixture of Pd and Re the detection limit was 31 ng l^− 1 for 2 min electrodeposition, 3.7 ng l^− 1 for 30 min, 1.5 ng l^− 1 for 1 h and 0.4 ng l^− 1 for 4 h electrodeposition, respectively. The procedure was applied to the determination of gold in river water samples. The relative standard deviation for the determination of 2.5 ng l^− 1 Au at 4 h electrodeposition time at 0.5 mA was 7.5%.     

The electrochemical advanced oxidation processes coupling of oxidants for organic pollutants degradation: A mini-review

The electrochemical advanced oxidation processes(EAOPs) have been extensively applied in the treatment of organic pollutants degradation.Herein,the mini review provides the coupling systems about EAOPs and different oxidants(e.g.,persulfate(PS),peroxymonosulfate(PMS),and ozone(O_3)),including EAOPs-PS systems,EAOPs-PMS systems,EAOPs-peroxone systems,and photoelectro-oxidants systems,for the organic compounds degradation.The coupling system of EAOPs with oxidants is an effective way to improve the generated free radicals(e.g.,HO~·and SO_4~(·-)) concentration and to accelerate pollutant degradation.In this review,we make a summary of the homogeneous and heterogeneous EAOPs-oxidant processes.The reaction mechanisms of EAOPs combined with different oxidants are elucidated in detail,as well as the synergistic effect for improving the degradation and mineralization efficiency.     

Effect of channel connection on flow and salinity distribution of Danshuei River estuary

Numerical models are often used to evaluate the potential impact of human alteration of natural water bodies and to help the design the alternation to mitigate its impacts. A vertical (laterally integrated) two-dimensional hydrodynamic model was expanded to include the capability of simulating river loops as well as tributaries. The model was performed and applied to the Danshuei River estuarine system in northern Taiwan which consists of three major tributaries: the Tahan Stream, Hsintien Stream, Keelung River, and one river loop under the Chung-Hsin Bridge. The expanded model was reverified with observational field data of 2000. The verified model was then used to hindcast the river hydrodynamic conditions with a loop connection between the Danshuei River and Keelung River, which existed prior to 1965. It was found that the configuration of river loop connection has significant impacts on the residual transport along the connecting channel and the salinities in the connected river branches. The results show that the model may provide an ideal tool for management decision.     

石墨炉原子吸收法连续测定沱江河水中的Cu、Pb、Cd、Cr

采用热解涂层石墨管 ,应用氘灯扣除背景技术 ,在无任何基体改进剂的条件下 ,提出连续测定沱江河水中 Cu、Pb、Cd、Cr的方法。该方法操作简便、检出限低 ,快速、准确 ,结果令人满意