Fluorescence spectra of Rhodamine 6G for high fluence excitation laser radiation

Fluorescence spectral changes of Rhodamine 6G in ethanol and glycerol solutions and deposited as a film on a silica surface have been studied using a wide range of pumping field fluence at 532 nm at room temperature. Blue shift of the fluorescence spectra and fluorescence quenching of the dye molecule in solution are observed at high excitation fluence values. Such effects are not reported for the film sample. The effects are interpreted as the result of population redistribution in the solute-solvent molecular system induced by the high fluence field and the fluence dependence of the radiationless decay mechanism.     

Characteristic time scales of tick quotes on foreign currency markets: an empirical study and agent-based model

Power spectrum densities for the number of tick quotes per minute (market activity) on three currency markets (USD/JPY, EUR/USD, and JPY/EUR) for periods from January 1999 to December 2000 are analyzed. We find some peaks on the power spectrum densities at a few minutes. We develop the double-threshold agent model and confirm that stochastic resonance occurs for the market activity of this model. We propose a hypothesis that the periodicities found on the power spectrum densities can be observed due to stochastic resonance.     

Estimation of Charge Exchange Recombination Emission Based on Diagnostic Neutral Beam on the Experimental Advanced Superconducting Tokamak

Diagnostic neutral beam （DNB） attenuation and charge exchange recombination emission are estimated on EAST tokamak. Approximately 40% of the beam with the energy of 50 keV can reach the plasma centre （r = 0） for the typical parameters of the Experimental Advanced Superconducting Tokamak （EAST） plasma. Emissivities of CVI （n = 8 → 7, 529.0nm） and OVⅢ （n = 10 →9, 607.Ohm） visible charge exchange recombination emissions based on the DNB are estimated. The emissivities of the visible bremsstrahlung emission near this wavelength are also calculated for comparison. The results show that the charge exchange recombination emission is about two orders of magnitude greater than the bremsstrahlung emission. It is theoretically indicated that the ratio of signal of charge exchange recombination spectroscopy to the noise from background bremsstrahlung emission, S/N, is large enough in the EAST tokamak with the typical designed parameters. The present results are helpful for experiment design of charge-exchange recombination spectroscopy based on the DNB in the EAST tokamak.     

Nature of contact resistance in high-T c YBa2Cu3O7−δ Superconductors

The contacts between various metals and the high-T_c superconductor YBa₂Cu₃O_7– are characterized by contact resistance,R _c, andI–V measurements from 300 K to 90 K. The contacts with bulk superconductor were made by vacuum deposition. Four metals, Au, Ag, Al, and Bi were investigated. The current transport across the contact is by carrier tunneling. All contacts were ohmic as theirI–V characteristics were symmetrical with respect to current direction.R _c values range between 10^–2 to 10¹ cm² and increase linearly as the temperature is lowered. The contact resistance originates from two distinct physical processes. One is the modification of the carrier concentration at the interface by the contact metal. The second is the nature of carrier injection at the free surface of the superconductor. TheR _c values depend on the contact metal-oxygen interaction parameter signifying the need for oxygen passivation for obtaining low contact resistances.     

Biomaterial immobilization on polyurethane films by XeCl excimer laser processing

The surface chemical modification of polyurethane (PU) films was performed by an UV laser-induced chemical reaction in a polysaccharide solution. This process may be applicable as hydrophilic packaging of implantable medical devices and in vivo sensors. When a PU film in contact with an aqueous alginic acid (AAC) solution was irradiated with a XeCl laser, the PU film turned hydrophilic. Contact angles of water on the film were reduced from 110° to 60°. Since light absorption of the AAC solution at 308 nm was negligibly small, reactive sites were generated solely on the PU surface. There, AAC could be immobilized by chemical bonds thus allowing for a nanometer-scaled grafting of this biomolecule. The mechanism was investigated by surface analyses with Fourier-transform infrared spectroscopy (FT-IR), dye staining, ultraviolet-visible (UV-VIS) spectroscopy, and scanning electron microscopy (SEM) techniques. A one-photon photochemical process could beidentified. Received: 30 June 2000 / Accepted: 4 July 2000 / Published online: 13 September 2000     

X-ray reflectivity of solid-supported, multilamellar membranes

We have investigated the structure of solid-supported, multilamellar membranes by X-ray reflectivity. The density profile is obtained by fitting the full q-range to a model using the bilayer Fourier coefficients as fitting parameters. The effect of hydration and the substrate boundary condition are discussed in view of the well-known Landau-Peierls effect and its implications for structure determination. The resulting bilayer density profile agrees remarkably well with previously published data of a molecular dynamics (MD) simulation for 1,2-oleoyl-palmitoyl-sn-glycero-3-phosphocholine (OPPC). Received 1 October 2001 and Received in final form 21 December 2001     

Active membranes studied by X-ray scattering

In view of recent theories of “active” membranes, we have studied multilamellar phospholipid membrane stacks with reconstituted transmembrane protein bacteriorhodopsin (BR) under different illumination conditions by X-ray scattering. The light-active protein is considered as an active constituent which drives the system out of equilibrium and is predicted to change the collective fluctuation properties of the membranes. Using X-ray reflectivity, X-ray non-specular (diffuse) scattering, and grazing incidence scattering, we find no detectable change in the scattering curves when changing the illumination condition. In particular the intermembrane spacing d remains constant, after eliminating hydration-related artifacts by design of a suitable sample environment. The absence of any observable non-equilibrium effects in the experimental window is discussed in view of the relevant parameters and recent theories.     

Monolayer deposition of L10 FePt nanoparticles via electrospray route

The deposition monolayers of L1₀ FePt nanoparticles via an electrospraying method and the magnetic properties of the deposited film were studied. FePt nanoparticles in a size of around 2.5 nm in diameter, prepared by a liquid process, were used as a precursor. The size of the deposited particles can be controlled up to 35 nm by controlling the sprayed droplet size that is formed by adjusting the precursor concentration and the precursor flow rate. The droplets were heated in a tubular furnace at a temperature of up to 900 °C to remove all organic compounds and to transform the FePt particles from disordered face centered cubic to an ordered FCT phase. Finally, the particles were deposited in the form of a monolayer film on a silicon substrate by electrostatic force and characterized by scanning electron microscopy. The monolayer of particles was obtained by the high charge on particles obtained during the electrospraying process. The magnetic properties of the monolayer were investigated by magneto-optic Kerr effect measurements. Coercivity up to 650 Oe for a film consisting of 35 nm L1₀ FePt nanoparticles was observed after heat treatment at a temperature of 800 °C.     

Formation of gold nanowires through self-assembly during scanning force microscopy

Gold films with a nominal thickness of 5–40 monolayers were grown on dielectric substrates and imaged by scanning force microscopy (SFM). The films originally consisted of well-separated or densely packed clusters. During imaging in contact mode, the morphology of the films changed drastically. At low coverage, i.e. Θ<10 monolayers, the well-known stripes originating from mobile clusters, eventually accumulated into larger aggregates, were observed. In contrast, at larger coverage, highly ordered structures consisting of one-dimensional wires evolved during scanning. They often were parallel with equal separation, i.e. well-defined periodicity, over distances of several μm. Typically, the wires were 5–10 nm high and 50–100 nm wide. Investigations of Au films prepared at varying temperature on different dielectric substrates allow us to suggest a self-assembling mechanism for wire formation in which gold is periodically collected by the SFM tip and redeposited as soon as a critical amount is reached. Received: 22 February 1999 / Accepted: 2 March 1999 / Published online: 7 April 1999