Photopolyaddition of dithiols to bis(alkoxyallene)s

Polyadditions of 1,4-benzenedithiol (BDT) to bis(alkoxyallene)s, such as 1,4-bis(allenyloxy)xylene (3) and 1,4-bis(allenyloxy) benzene (4) , were carried out in benzene at 25°C by irradiation with a high pressure mercury lamp. Thiol groups were added to the terminal double bonds of the allenyloxy groups selectively to afford polymers containing reactive carbon–carbon double bonds in the main chain, similar to the radical polyadditions using azobis(isobutyronitrile) (AIBN). The molecular weight of the polymer obtained from BDT and 3 was 10 times higher than that of the polymer produced in the radical polyaddition with AIBN; whereas the molecular weight of the polymer from BDT and 4 was similar to that in the radical polyaddition, probably because of poor solubility of 4 and the polymer toward benzene. The geometrical structure of carbon–carbon double bonds in the polymer isomerized from an E to Z structure with reaction time by virtue of both the addition elimination of thiyl radical to the double bonds and the UV irradiation. © 1996 John Wiley & Sons, Inc.     

Fabrication of red-emitting CaAlSiN3: Eu2+ through phosphor-in-glass approach for application in rear combination lamp

In this study, the red-emitting phosphor-in-glass (PiG) using the CaAlSiN₃: Eu²⁺ (CASN) phosphor is reported for the first time. The CASN: Eu²⁺ PiG samples with a maximum luminous flux of 25.1–29.4 for l minute at laser power of 1 W/mm² was obtained using a low-temperature glass frit and GPS furnace. Despite the increase in the phosphor from 15 to 25 wt%, the PiG produced at low temperature of 380 °C showed robust properties. Finally, the red PiG module designed for rear lamp applications maintains over 90% lumens for a minute at 350 mA and achieves an intense red light having a color temperature of 4589 K.     

Inclusion Complex Formation of Thiacalix[4]arene and Xe in Aqueous Solution Studied by Hyperpolarized 129Xe NMR

The inclusion complex formation of 4-sulfothiacalix[4]arene sodium salt (STCAS) and Xe has been investigated by using hyperpolarized ¹²⁹Xe NMR spectroscopy. Our new continuous-flow type hyperpolarizing system has advantageous capabilities that can supply hyperpolarized gases continuously and directly to a sample solution in a NMR tube. Consequently saturated Xe concentration in the aqueous solution of STCAS is maintained during the NMR experiment, and ¹²⁹Xe NMR spectra can be obtained in remarkably short time. STCAS concentration dependence of ¹²⁹Xe chemical shift has been analyzed in an elaborated way by a computer method as well as a simple graphic method that we have proposed. The association constant K:13.6±0.8 M⁻¹ at 25 °C was obtained, and further analysis of the temperature dependence has successfully given thermodynamic parameters of enthalpy (ΔH) and entropy (ΔS) for the inclusion complex formation: ΔH = −11.9±1.9 kJ mol⁻¹ and ΔS = −17.4±5.8 JK⁻¹ mol⁻¹. The energetic aspects of complex formation are discussed from the size effect and from the molecular theory of standard entropy, and a release of definite number of water molecules from STCAS cavity is suggested in the inclusion complex formation with Xe.     

MOLECULAR CONFORMATION OF IONIC SURFACTANTS IN AQUEOUS SOLUTION

The molecular conformation of ionic surfactant in aqueous solution is investigated withfluorescent probes which are intrinsic insurfactant molecules or externally introduced. Quench-lng or pyrene monomer fluorescence by alkyltriphenylphosphonium or N-alkylpyridiniumobeys Stern-Voimer equation, being diffusi6n-controlled dynamic quenching, but the behaviorof quenching with different lengths of alkyl chain is "abnormal", i.e. the longer the chain,the greater the quenching rate constant. The pyrene excimer fluorescence is observed in theaqueous solution of cetyltrimethylammonium bromide (CTMAB), and the inhibition (for cationicquenchers) and promotion (for anionic quenchers) effects of CTMAB on the quenching ofpyrene fluorescence are also observed. The self-coiling conformation of ionic surfactantmolecules in aqueous solution is proposed to be responsible for these observations and theconformation to be dynamic.     

Deep‐ultraviolet laser ablation electrospray ionization mass spectrometry

A 193‐nm wavelength deep ultraviolet laser was used for ambient laser ablation electrospray ionization mass spectrometry of biological samples. A pulsed ArF excimer laser was used to ablate solid samples, and the resulting plume of the desorbed material merged with charged electrospray droplets to form ions that were detected with a quadrupole time‐of‐flight mass spectrometer. Solutions containing peptide and protein standards up to 66‐kDa molecular weight were deposited on a metal target, dried, and analyzed. No fragmentation was observed from peptides and proteins as well as from the more easily fragmented vitamin B₁₂ molecule. The mass spectra contained peaks from multiply charged ions that were identical to conventional electrospray. Deep UV laser ablation of tissue allowed detection of lipids from untreated tissue. The mechanism of ionization is postulated to involve absorption of laser energy by a fraction of the analyte molecules that act as a sacrificial matrix or by residual water in the sample.     

The electrodeless discharge lamp: a prospective tool for photochemistry: Part 3. The microwave photochemistry reactor

A simple and original microwave photochemical reactor is described in detail. It consists of an electrodeless discharge lamp placed into the reaction vessel in a modified domestic microwave oven. The microwave field generates ultraviolet radiation by the lamp at the same time when it interacts with the reaction mixture. The construction, experimental set-ups, applications, and safety precautions are discussed.     

PHOTOPHYSICAL STUDIES ON ORGANIC COMPOUNDS——TIME-RESOLVED TRANSIENT ABSORPTION SPECTRA STUDIES ON TRIPHENYLAMINE IN VARIOUS SOLVENTS

The transient absorption spectra of triphenylamine (TPA) in various solvents have beeninvestigated by the methods of nanosecond laser photolysis. The lifetimes of TPA were meas-ured. In hexane and ethanol, the transient absorptions of triplet state and triplet excimer ofTPA were observed. However, the transient absorptions of the TPA cation radical was alsoobserved in acetonitrile besides that of the triplet TPA monomer and excimer. According tothe experimental facts, the transient photophysical mechanism of TPA in various solvents hasbeen proposed.     

Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications

Dielectric-barrier discharges (silent discharges) are used on a large industrial scale. They combine the advantages of non-equilibrium plasma properties with the ease of atmospheric-pressure operation. A prominent feature is the simple scalability from small laboratory reactors to large industrial installations with megawatt input powers. Efficient and cost-effective all-solid-state power supplies are available. The preferred frequency range lies between 1 kHz and 10 MHz, the preferred pressure range between 10 kPa and 500 kPa. Industrial applications include ozone generation, pollution control, surface treatment, high power CO₂ lasers, ultraviolet excimer lamps, excimer based mercury-free fluorescent lamps, and flat large-area plasma displays. Depending on the application and the operating conditions the discharge can have pronounced filamentary structure or fairly diffuse appearance. History, discharge physics, and plasma chemistry of dielectric-barrier discharges and their applications are discussed in detail.     

A sensitive and selective determination method of histamine by HPLC with intramolecular excimer-forming derivatization and fluorescence detection

A highly sensitive, selective and simple method is described for the determination of histamine by high-performance liquid chromatography (HPLC) with fluorescence detection. The method is based on an intramolecular excimer-forming fluorescence derivatization of histamine with 4-(1-pyrene)butyric acid N-hydroxysuccinimide ester (PSE), followed by reversed-phase HPLC. Histamine, having two amino moieties in a molecule, was converted to the dipyrene-labeled derivative by reaction with PSE. The derivative afforded intramolecular excimer fluorescence (450-540 nm), which can clearly be discriminated from the monomer fluorescence (370-420 nm) emitted from PSE. Typically, a 10 micro L sample solution was mixed with 100 micro L of derivatization reagent solution, which was a mixture of 0.5 mm PSE in acetonitrile and 0.5 mm potassium carbonate in water (8:2, v/v). The derivatization was carried out at 100 degrees C for 90 min. The PSE derivative of histamine could be separated by reversed-phase ODS column with isocratic elution using acetonitrile:water (82:18, v/v) containing 0.03% triethylamine. The detection limit (singnal-to-noise ratio = 3) of histamine was 0.5 fmol for a 30 micro L injection. The method was successfully applied to the determination of histamine in human urine, and had enough selectivity and sensitivity for urinary histamine quantification.     

回收灯用钨丝在H2O2催化氧化环己酮合成己二酸中的应用

以回收灯用钨丝为催化剂前驱物,30％H2O2为氧源,催化氧化环己酮合成了己二酸,反应体系中无须使用有机溶剂、酸性助剂和相转移剂。 IR和TG分析表明,钨丝与H2O2反应生成的新生态过氧钨酸是催化活性成分,合成己二酸后转化为钨酸。 钨丝为催化剂前驱物合成己二酸适宜反应条件为：100 mmol环己酮,50 mL 30%H2O2,钨丝的摩尔用量为环己酮摩尔数的1.5%,回流反应6 h,己二酸收率63.7%。 比相同反应条件下用钨酸和WO3为催化剂的收率高10%~18%。