硬脂酸镉和山嵛酸镉混合LB膜的微结构

X-ray diffraction (XRD) was used to investigate the microstructure and phase separation of mixed multilayers of cadmium stearate (SA) and behenate (BA) deposited onto hydrophilic glass by the Langmuir-Blodgett technique. No unitary fatty acid diffraction peaks in the XRD spectra of the mixed LB films, which reveals that domains in these samples are small and uniform. The interplanar spacing of the mixed LB films changes with the ratio of BA to SA in a step-shaped curve, which suggests that with the changing of the ratio between BA and SA, only three kinds of ordered structure form in the mixed system, and each microstructure, in particular, the short chains against long chains meshed microstructure can be maintained in a certain ratio range . In addition, for the meshed microstructure, the alkyl chains of both SA and BA stand straight or may have exactly the same small tilted angle from the substrate normal, as is indicated by the symmetric and asymmetric stretching vibration of methylene (CH2) peaks which are at 2847.80 and 2914.37 cm-1respectively in the Fourier transform infrared (FT-IR) transmission spectra. The mixed system always goes through a longitudinal regularity decreasing process when BA/SA is out of the intermediate ratio range (BA/SA: 1/5-1/1), which is illustrated by the relative XRD intensity changing with the ratio of BA/ SA in a \W" shape. These results for the mixed LB films of BA/SA provide meaningful data for choosing the mixture ratio when fabricating composite films with special structure.     

The synthesis and evaluation of unsymmetrical dimeric X-ray contrast agents

Novel dimeric iodinated contrast agents with low osmolality have been prepared and evaluated with the aim of improving the already good safety profile of such agents. The aim of low osmolality was achieved, and the viscosity of these dimeric agents was also found to be beneficially lower than current dimeric agents in clinical use.     

The Effect of Molecular Structuring of an Incompatible Linear Polymer-Net Polymer System on Its Micro-Heterogeneity under the Effect of 3<Emphasis Type="Italic">d</Emphasis>-Metal Chelates

The influence of the nature of the central ion [Cu(2+), Cr(3+), Fe(3+)] of the chelate compound on the possibility of interaction of the metal-containing modifier with one or both of the components of the incompatible PU/PMMA system was studied by the ESR method. It was shown by low-angle X-ray diffraction that the change in the degree of microheterogeneity of the semi-IPN correlated with the characteristics of complex forming metal and the polymer matrix. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 4, pp. 252–256, July–August, 2005.     

Non-bilayer formation in the DPPE-DPPG vesicle system induced by deep rough mutant of Salmonella minnesota R595 lipopolysaccharide

The vesicle system consisting of 80 mol% dipalmitoylphosphatidylethanolamine (DPPE) and 20 mol% dipalmitoylphosphatidylglycerol (DPPG) undergoes to structural changes caused by various concentrations of Salmonella minnesota R595 lipopolysaccharide (LPS). The phenomenon was investigated by methods applying small- and wide-angle X-ray scattering (SAXS and WAXS), calorimetry (DSC) and freeze-fracture. In the low LPS concentration regime (investigated at 0.02 LPS/DPPE–DPPG molar ratio) a phase separation was observed. Two kind of domains are formed which are rich and poor in DPPE and in these domains cubic and lamellar structures are present, respectively. Increasing the LPS concentration up to 0.1 LPS/DPPE–DPPG molar ratio the phase separation is more expressed and the temperature domains of the phase transitions are more different. Increasing the temperature chain melting of the lamellar phase occurs first and destruction of the cubic phase is observed later. At high LPS concentration (equimolar ratio of LPS/DPPE–DPPG), where this amphiphilic molecule cannot be considered any more a guest molecule, the cubic structure dominates the phase behaviour of the LPS molecules.     

Das Pyren und der Einfluß von Substitution oder Komplexie-rung auf seine Geometrie und Packung im kristallinen Zustand

The crystal structures of pyrene and substituted and complexed derivatives of pyrene have been investigated by X-ray and neutron diffraction. The geometry of the pyrene skeleton has been determined experimentally with high accuracy and calculated by quantum chemical methods. In the cases reported in the literature and cited here the pyrene skeleton has the molecular symmetry mmm or mm2 with values for the bond lengths of the six symmetrically independent bondsa, b, c, d, e, f differing significantly in the limits of error. Mean values of a number of experimental and theoretical bond lengths are given and can be considered as standard values for the mm2 symmetric pyrene skeleton. In the case of substitution of the pyrene in 3-position with a polar heterocyclic molecule of the azomethine-imine type the mm2 symmetry vanishes, a C–H ... N intramolecular hydrogen bond arises and the directly neighbouring pyrene units are not packed parallel with their planes to each other, but they are considerably tilted. Relatively narrow intermolekular C-C contacts, 3.314 and 3.368 Å, have been observed. The conclusion is drawn that the asymmetry of the pyrene molecule and a tilt of directly neighbouring pyrene units in the crystal packing can be induced by substitution e. g. with suitable polar heterocycles.

Juli 1985.     

In situ X-ray diffraction study of reduction processes of Fe3O4- and Fe1−xO-based ammonia-synthesis catalysts

The temperature-programmed reduction process of two types of industrial ammonia-synthesis catalysts, A110 and ZA-5, which are, respectively, based on Fe₃O₄ and Fe_1−xO precursors, were studied by in situ X-ray power diffraction (XRD). It has been found that the ZA-5 has lower reduction temperature and faster reduction rate, and its active phase α-Fe possesses a higher value of lattice microstrain than A110. The simulation based on Rietveld refinement has also shown that the shape of α-Fe grain of ZA-5 has a mixed shape of cube and sphere with more exposing (111) and (211) planes, while that of A110 looks like a concave cube with more exposing (110) planes. Based on the results obtained, a growth model of α-Fe during the reduction of Fe₃O₄- and Fe_1−xO-based ammonia-synthesis catalysts is proposed, and the origins for the activity difference has been also discussed.     

Copper(II) complexes of 2-amino-5-chloro-3-fluoropyridine: syntheses and magnetic properties of (3,5-FCAP)2CuX2 and (3,5-FCAPH)2CuX4

Using 2-amino-5-chloro-3-fluoropyridine, two new copper halide coordination complexes and two new salts have been synthesized: [(3,5-FCAP)₂CuCl₂] (1), [(3,5-FCAP)₂CuBr₂](2), (3,5-FCAPH)₂[CuCl₄] (3) and (3,5-FCAPH)₂[CuBr₄] (4) [3,5-FCAP?=?2-amino-5-chloro-3-fluoropyridine; 3,5-FCAPH?=?2-amino-5-chloro-3-fluoropyridinium]. These complexes have been analyzed through single-crystal X-ray diffraction and temperature-dependent magnetic susceptibility. Compounds 1 and 2 crystallize in the triclinic space group P-1, while 3 and 4 crystallize in the monoclinic space group P2₁/c. All structures were distinct, with 1 giving a bihalide bridged chain, 2 yielding a halide bridged dimer, 3 forming a two-halide bridged chain via short Cl???Cl contacts, and 4 producing a rectangular sheet via short Br???Br contacts. All four compounds exhibit anti-ferromagnetic interactions and were fit to linear chain (1 and 3), dimer (2), and rectangular 2-D sheet (4) models. The resulting J/k_B values are ?3.4(1), ?31.3(8), ?0.9(1), and ?9.46(6)?K with an α value (α?=?J?/J) of 0.06(2), respectively.     

Pharmaceutical performance of solid dispersions containing poly(ethylene) glycol 6000 and diazepam or temazepamInfluence of grinding

The effect of grinding on the physical properties and pharmaceutical performance of solid dispersions made of poly(ethylene) glycol 6000 (PEG6000) and temazepam or diazepam was studied using differential scanning calorimetry (DSC), X-ray powder diffraction and dissolution experiments. DSC-analysis of flash-cooled dispersions revealed that amorphous PEG present immediately after grinding crystallised upon aging mainly into the twice folded modification and to a small extent into the extended form. DSC-analysis of dispersions kept in the slab form for 1 month and subsequently ground, revealed that in the abscence of the grinding impulse crystallisation of PEG6000 takes place in the same way as in dispersions ground immediately after preparation and then aged for 1 month. Grinding solid dispersions immediately after preparation resulted in superior dissolution properties compared with solid dispersions kept in the monolith-slab form and subsequently ground. This difference in dissolution properties was found to be attributed to the drug and not to the polymer, more precisely, it was suggested that the drug particle size in ground dispersions was smaller than in dispersions kept in the slab form and subsequently ground. These findings suggest that grinding of solid dispersions immediately after preparation is the preparation method of choice instead of liquid filling of hard gelatin capsules resulting in monoliths. This revised version was published online in July 2006 with corrections to the Cover Date.     

含铁化合物的Fe2p和Fe3s电子能谱研究

选择了十几种常见的含铁化合物,分另采集了它们的Fe2p和Fe3s谱。从峰位和峰形上讨论了它们各自的特点,结果表明Fe2p和Fe3s峰的峰形分析（如,shake-up卫星峰及多重分裂峰）像其结合能值一样可以提供化学状态分析的重要信息。