Surface polarity of cellulose derivates observed by coumarin 151 and 153 as solvatochromic and fluorochromic probes

Solvent‐dependent ultraviolet–visible (UV–vis) absorption and Stokes shifts including strong hydrogen‐bond‐donating (HBD) solvents such as 2,2,2‐trifluoroethanol and 1,1,1,3,3,3‐hexafluoro‐2‐propanol of two coumarine dyes (Co 151 and Co 153) were analyzed with multiple‐square analyses of linear solvation energy relationships and the Kamlet–Taft solvent parameter set to α (HBD capacity), β (hydrogen‐bond‐accepting capacity), and π* (dipolarity/polarizability). The UV–vis absorption and emission spectra of Co 151 and Co 153 were measured when adsorbed on various polysaccharides such as different cellulose batches, carboxymethylcelluloses with different degrees of substitution, and chitine. As a result of this evaluation, Co 153 is recommended as an alternative UV–vis probe for evaluating the dipolarity/polarizability of cellulose and cellulose derivates. Multiple adsorption of Co 153 on Linters cellulose took place indicating a wide‐surface polarity distribution, which makes the determination of a rigid polarity parameter questionable. Thus, fluorescence measurements of adsorbed Co 153 are suitable to detect inhomogenities on a surface but not for the determination of empirical polarity parameters. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1210–1218, 2003     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

Multilayer optics for XUV spectral region: technology fabrication and applications

We present research investigations in the field of multilayer optics in X-ray and extreme ultra-violet ranges (XUV), aimed at the development of optical elements for applications in experiments in physics and in scientific instrumentation. We discuss normal incidence multilayer optics in the spectral region of “water window”, multilayer optics for collimation and focusing of hard X-ray, multilayer dispersing elements for X-ray spectroscopy of high-temperature plasma, multilayer dispersing elements for analysis of low Z-elements. Our research pays special attention to optimization of multilayer optics for projection EUV-lithography (ψ-13nm) and short period multilayer optics.     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Influence of annealing and chain defects on the melting behaviour of poly(vinylidene fluoride)

The melting behaviour of poly(vinylidene fluoride) (PVDF) was investigated by differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering in order to study the influence of the chain defects content and of the temperature of annealing on the crystallization and melting behaviour.All the DSC scans show a double endotherm and the analysis of the data suggests that the low temperature endotherm is due to the melting of a population of thin lamellae, whose thickness increases during the annealing, but a high content of chain defects prevents the lamellar thickening and the main effect in this case is the crystallization of thin lamellae from a portion of polymer which did not crystallize during the quenching from the melt. Furthermore, the two melting endotherms, which are observed, can be partially ascribed to a melting-recrystallization process.Furthermore, stepwise isothermal cooling was performed in a differential scanning calorimeter followed by melting scans of fractionated PVDF samples to point out the possible presence of a series of endothermic peaks.     

Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

Spectrophotometric Study of Luminol in Dimethyl Sulfoxide–Potassium Hydroxide

The spectrophotometric study of luminol (LH₂) in dimethyl sulfoxide (DMSO), DMSO-water solutions, and alkaline DMSO and DMSO-water solutions has been done, focusing on the effect of the KOH additon on LH₂ absorption and fluorescence properties. The absorption spectra indicate an acid-base equilibrium, and the luminol dianion (L^2–) formation at 3 × 10^–4 – 2.4 × 10^–3 M KOH. The decrease of the fluorescence intensity and the variation of the excitation spectra of LH₂-DMSO-KOH solutions with KOH concentration have been similarly explained. The acid-base process is reversible. The addition of HCl to the solution with 3.0 × 10^–3 M KOH leads to an increase of the fluorescence intensity to its highest value, observed in pure DMSO. The addition of HCl to the LH₂-DMSO solution leads to the decrease of the fluorescence intensity as a result of the LH⁺ ₃ cation formation. In LH₂-DMSO-water, the fluorescence band is shifted from 405 nm to 424 nm and increased in the intensity. In the presence of KOH (in LH₂-DMSO-water-KOH solution) a new band appears, with the maximum at 485 nm and the band at 405 nm decreased. The changes in fluorescence lifetimes also evidence the different chemical species formed.     

Static light scattering,ultraviolet–visible,and fluorescence spectroscopy from fluorescent methyl methacrylate/benzazole dye copolymers displaying an intramolecular proton‐transfer mechanism in the electronically excited state

The solution behavior of new copolymers of methyl methacrylate and benzazole dyes emitting fluorescence because of an intramolecular proton‐transfer mechanism in the electronically excited state has been investigated by static light scattering, fluorescence spectroscopy, ultraviolet–visible, and gel permeation chromatography. In the dilute regime, with tetrahydrofuran (THF) and chloroform as solvents, the copolymers behave as typical polydisperse linear chains in good solvents. The analysis of the osmotic modulus for concentrated solutions in THF (c ≥ 60 g L^?1) indicates the existence of an interchain association mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 341–350, 2003     

Intrinsic Fluorescence of Actin

In this work actin is used to illustrate connection of protein fluorescence characteristics with its structure. On one hand, it has been demonstrated what kind of information about the contribution of each tryptophan residues to the bulk fluorescence spectrum can be obtained from the special analysis of protein three-dimensional structure. On the other hand, potentials of intrinsic fluorescence for elucidation of proteins structure, dynamics and processes of folding-unfolding are shown. In particular, using this method a new essentially unfolded kinetic intermediate state of actin was detected and characterized, and the place of inactivated actin and its kinetic predecessor in the process of folding-unfolding was determined. It has been revealed that inactivated actin is not intermediate state between the native and completely unfolded states, as it has been accepted before, but a result of protein misfolding. On the basis of the obtained data a new model of actin folding-unfolding pathway has been proposed.