Heterogeneous photobleaching in confocal microscopy

Photobleaching was studied during recording of confocal scanning laser microscopy. Studies on fluorescent gels of FITC-labeled dextran were used to evaluate differential bleaching along thez-axis. Differential bleaching along the z-axis was observed and it was seen that this was related to the numerical aperture of the objective in use. This points to the conclusion that photon energy flux density is an important parameter in photobleaching. To check if photon energy flux density heterogeneity is affected by local variation in the refractive index of the sample, photobleaching rates were calculated for different fluorescent objects (sections of seeds, animal cells stained with nuclear stains, immunocytochemistry preparations) and a pronounced similarity was found between photobleaching rates and DIC images.     

Ag+掺杂的立方相Y2O3:Eu纳米晶体粉末发光强度研究

采用化学自燃烧法制备了不同Ag⁺掺杂浓度的Y₂O₃:Eu纳米晶体粉末样品(［Y³⁺］∶［Eu³⁺］∶［Ag⁺］=99∶1∶X，X=0—3.5×10^-2)，以及通过退火处理得到了相应的体材料.根据X射线衍射谱确定所得纳米和体材料样品均为纯立方相.实验表明在纳米尺寸样品中随着Ag离子浓度的增加，荧光发射强度随之增加，当X=2×10^-2时达到最大值，其发光强度比X=0时提高了近50%.当Ag离子浓度继续增加，样品发光强度保持不变.在相应的体材料样品中则没有观察到此现象.通过对各样品的发射光谱，激发光谱，X射线衍射图谱，透射电镜(TEM)照片和荧光衰减曲线的研究，分析了引起纳米样品荧光强度变化的原因是由于Ag离子与表面悬键氧结合，从而使这一无辐射通道阻断，使发光中心Eu³⁺的量子效率提高；Ag⁺的引入所带来的另一个效应是使激发更为有效.这两方面原因使发光效率得到了提高.     

Applications of synchrotron radiation in materials analysis

The synchrotron radiation (SR) emitted by circulating high-energy electrons has extraordinary properties: The light is intensive and bright, it is tunable and highly collimated, and finally, it is linearly polarized. These exceptional properties have initiated a unique revival of many spectroscopies using electromagnetic radiation. The techniques of special concern for materials analysis which are treated in this article are: X-ray absorption, reflection, fluorescence, diffraction and topography. A number of examples will be given in order to illustrate the possibilities of these techniques when SR is used.On leave of absence from Institut für Festkörperforschung, KFA Jülich, D-5170 Jülich, Federal Republic of Germany     

Systematic investigations of the multi-element preconcentration from copper by precipitation of the matrix as copper(I) oxide and copper(I) thiocyanate

Two methods for multi-element preconcentration from copper by reductive matrix precipitation are presented. In systematic investigations on the coprecipitation behaviour of Ag, Al, Au, Bi, Cd, Co, Cr, Fe, Ga, In, Mn, Mo, NJ, Pb, Sb, Se, Sn, Te and Zn during precipitation of the copper matrix as Cu₂O or CuSCN, the separation parameters were optimized. By combination with a hexamethyleneammonium hexamethylenedithiocarbamate collector precipitation, a concentration of 8 elements (Cu₂O precipitation) or 13 elements (CuSCN precipitation) in a small volume was achieved. The limits of detection of the procedures are, depending on the element, 0.1–5 μg g^?1 for flame atomic absorption spectrometry (AAS) and 0.01–0.1 μg g^?1 for graphite furnace AAS. The relative standard deviations are about 3%. The analytical performance of the procedures is compared with that of an electrolytic copper separation.     

同步辐射讲座 第二讲 同步辐射X射线荧光及其在植物微量元素分析中的应用

比较了同步辐射（SR）X射线荧光（XRF），电子和质子激发的X射线谱，介绍了XRF谱的采集方法及数据处理方法（主要是能谱方法），智能方法的无标样（基本参数法）定量分析原理，以及近期在植物微量元素分析中得到的结果。     

空心阴极灯激发的微波等离子体炬原子/离子荧光光谱研究--钙的原子/离子荧光光谱

用强短脉冲供电技术的空心阴极灯作激发源、微波等离子体炬作原子／离子化器，建立了原子／离子荧光光谱实验装置。详细研究了微波等离子体功率、观察高度、空心阴极灯电流等因素对原子／离子荧光信号强度的影响，测量了系统对Ca的原子／离子荧光光谱的检出限。     

8β-hydroxyeremophil-7(11)-ene-12,8α(4β,6α)-diolide分子的晶体结构

运用层析法、结晶法从狭苞橐吾全草中分离得到艾里莫芬烷型倍半萜8β-hydroxyeremophil-7(11)-ene-12,8α(4β,6α)-diolide化合物,并通过质谱、核磁共振氢谱和碳谱、氢核-氢核相关谱、异核多量子相干谱和异核多键相干谱进行结构鉴定．其单晶经X射线衍射测试表明,其晶体属正交晶系,空间群为P212121,晶胞参数为: a=6．8519(5),b=10．7191(8),c=18．5942(14)A,V=1365．67(18) A3,Z=4,Dc=1．354 mg／m3．F(000)=592,μ=0．101 mm-1     

Synthesis and characterisation of cadmium titanium oxide thin films by sol-gel technique

Crack free, dense and transparent CdTiO₃ thin films have been prepared by sol-gel technique using titanium butoxide and cadmium acetate. The formation of the CdTiO₃ phase started from 500°C annealing temperature onwards. The complete orthorhombic structure of CdTiO₃ was formed on Silicon (100) substrate at an annealing temperature of 600°C for 5 h. As the annealing temperature increased from 600 to 700°C, we have observed the cadmium silicate phase at the interface of Si and CdTiO₃ phase. Structural, morphological and elemental evolution of these CdTiO₃ thin films produced by sol-gel synthesis were characterised by grazing incidence X-ray diffraction (GIXRD), tapping mode atomic force microscopy (TMAFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) respectively.     

激光产生的铝、硅、氧、铜、硒等离子体X光谱

利用长晶格的OHM晶体谱仪,从激光等离子体中获得丰富的铜、硒类氖、类氟、类钠离子的二、三、四级软X射线衍射光谱和铝、氧、硅的类氢、类氦、类锂离子一到四级谱,波长在14～40(?)之间,在此基础上,本文较为细仔地分析了各光谱结构.