结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响

结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响麦堪成，许家瑞，梅震，曾汉民（中山大学材料科学研究所，广州，５１０２７５）关键词聚醚醚酮，聚苯硫醚，结晶／结晶共混物，结晶熔融行为近年来，高性能聚合物共混物如聚砜（ＰＳ...     

A simple and efficient one-pot synthesis of β-acetamido carbonyl compounds using sulfated zirconia as a heterogeneous recyclable catalyst

Sulfated zirconia has been employed as an efficient recyclable catalyst for the preparation of various β-acetamidoketones or esters at room temperature. The process involves the one-pot multicomponent reactions of aromatic aldehydes, enolizable ketones or β-ketoesters and acetonitrile in the presence of acetyl chloride.     

1,4-双(二苯基膦)丁烷交联的季膦化聚芳醚酮阴离子交换膜

以1,4-双(二苯基膦)丁烷为交联剂,以具有四甲基联苯结构的聚芳醚酮为基体材料,分别制备了刚性三苯基膦和柔性三丁基膦修饰的阴离子交联膜材料.交联剂在交联结构形成的过程中转变成季膦盐,在提高膜材料机械稳定性的同时保持离子交换功能基团的含量.研究了2种阴离子交换膜的尺寸稳定性、电导率、机械性能及耐碱稳定性等.研究结果表明,当交联度为20%时,三苯基膦与三丁基膦修饰的阴离子交换膜的拉伸强度分别由未交联时的27和18 MPa提高到45和30 MPa;交联的膜材料在60℃的3 mol/L KOH溶液中浸泡120 h后,三苯基膦修饰的阴离子交换膜的电导率保留率为81%,三丁基膦修饰的阴离子交换膜的电导率保留率为69%,膜的耐碱稳定性均较未交联时有明显提高.交联度相同时,三苯基膦修饰的阴离子交换膜表现出更高的拉伸强度和更好的耐碱稳定性.     

含酮基团对煤焦异相还原NO的影响

基于量子化学密度泛函理论和过渡态理论研究了含酮基团对煤焦异相还原NO的影响及其产物发生氧脱附的微观反应机理。计算结果表明，NO更易于吸附在含酮基团煤焦表面。椅形含酮基团强化了煤焦异相还原NO；锯齿形含酮煤焦表面与NO异相反应决速步能垒值（495.45 kJ/mol）大于锯齿形纯碳基煤焦表面与NO决速步能垒值（331.32 kJ/mol），基于锯齿形含酮煤焦模型中的氧浓度不在利于NO还原的范围内而不易于NO的还原。中间产物P1在无CO存在情况下，较纯碳基煤焦表面更易于发生氧脱附而产生表面缺陷；在CO存在条件下，含酮煤焦表面为氧脱附过程提供自由活性位点，降低了过程能垒消耗。     

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane induced by N-heterocyclic carbene and thiourea

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane catalyzed by thiazolium A has been developed. The reaction rate and efficiency are profoundly impacted by the presence of thiourea B. The reaction affords moderate to good yields of the Stetter product. Some factors influencing yield were discussed.     

Efficient Transition‐Metal‐Free Oxidation of Benzylic and Secondary Alcohols to the Carbonyl Compounds Using an N‐Bromosuccinimide/NH4Cl System

The oxidation of a variety of benzylic and secondary alcohols was achieved in excellent yields using an NBS/NH₄Cl system in aqueous acetonitrile (CH₃CN‐H₂O; 7/3 v/v) at 80°C under very mild conditions.     

Poly(aryl ether ketone) composite membrane as a high‐performance lithium‐ion batteries separator

We described the design and synthesis of a modified poly(aryl ether ketone) bearing phenolphthalein and allyl groups (P‐PAEK) via nucleophilic polycondensation. A new kind of composite separator, crosslinked P‐PAEK/polyvinylidene fluoride (c‐P‐PAEK/PVDF) membrane was successfully prepared using phase separation, phase inversion method, and UV crosslinking technique. As a separator of lithium‐ion battery, c‐P‐PAEK/PVDF membrane demonstrates high porosity and uniform distribution of pores with interconnected pathways. Low thermal shrinkage, distinct shut‐down effect, high liquid electrolyte uptake capacity, and exciting liquid electrolyte wettability of the prepared c‐P‐PAEK/PVDF membrane have been revealed through comprehensive study. Moreover, the c‐P‐PAEK/PVDF membrane was applied to assemble a conventional Li/LiFePO₄ coin cell, which exhibited hopeful cell performance. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2714–2721     

A convenient and practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with formic acid as carbon monoxide source

A practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with arylboronic acids under carbon monoxide gas‐free conditions has been developed using a bidentate phosphino‐functionalized magnetic nanoparticle‐immobilized palladium(II) complex as catalyst. Formic acid was utilized as the carbon monoxide source with dicyclohexylcarbodiimide as the activator, and a wide variety of biaryl ketones were generated in moderate to high yields. The new heterogeneous palladium catalyst can be prepared via a simple procedure and can easily be separated from a reaction mixture by simply applying an external magnet and recycled up to 10 times without any loss of activity.     

Synthesis and Characterization of Poly(ether ether ketone)s with (2,5‐dihydroxy)phenyl Side Group

A new monomer, (2,5‐dimethoxy)phenylhydroquinone (DMPH), was prepared in a two‐step synthetic procedure. One aromatic poly(ether ether ketone)s with 2,5‐dimethoxy phenyl side group (DMP‐PEEK) was synthesized via an aromatic nucleophilic substitution reaction with 4,4′‐difluorobenzophenone (DFB). Poly(ether ether ketone)s with 2,5‐dihydroxy phenyl side group (DHP‐PEEK) was obtained via hydrolysis of methoxy group on the DMP‐PEEK. Both of the high molecular weight polymers could be obtained despite the steric effect of the bulky pendant groups. The two polymers have good solubility at room temperature.     

Unusual Course of the Reaction of Allyl Phosphine Oxides with the Grundmann Ketone

This article describes efficient preparation of isomeric allyl phosphine oxides possessing a protected cyclohexanediol fragment. Their base-catalyzed interconversions are examined and reactions with the Grundmann ketone provide an adduct containing the rearranged vinyl phosphine oxide moiety, instead of 19-norvitamin D₃ analogs, the expected products of the Horner–Wittig process.