Solid Introduction to an ICP-Atomic Emission Spectrometer for the Analyses of Metals Contents of Air Filters

The direct introduction of solid samples (air filters) to the inductively coupled plasma source of an atomic emission spectrometer using a furnace atomizer has been studied. Conditions have been found for the analysis of elements which volatilize with varyling degrees of difficulty. Lead, copper and vandaium compounds retained on glass fibre filters from air pollution studies have been determined. The results are in good agreement with those obtained by means of established sample dissolution/atomic emision methods.     

Tracer Study on Catalytic Hydrogen Exchange Reactions over Nickel Catalyst

In heterogeneous catalysis it is important to know the reactivity of C-H bond in the hydrocarbon molecules. Experiments have been performed to obtain information about the exchange reaction of adsorbed hydrogen with methane and ethylene. In order to reduce the probability of forming products which contain more than one tritium atom, hydrogen labelled with H³ with low activity has been used.     

Untersuchung der tribologischen Eigenschaften von Nutzfahrzeugmotoren unter besonderer Berücksichtigung der Luftfiltration

Es wurde eine unter Betriebsverhältnissen anwendbare Prüfmethode für die Bestimmung der Verschleβeigenschaften von Verbrennungsmotoren mit Hilfe der Gammaspektrometrie der neutronenaktivierten Verschleiβprodukte ausgearbeitet und die die Lebensdauer begrenzende Wirkung des abrasiven Verschleiβes festgestellt. Durch Verbesserung der Luftfilterung konnte die potentielle Lebensdauer der Motoren gut angenähert, und es konnten die Verunreinigung des Schmieröls vermindert und die Dauer der Ölwechselperiode verdoppelt werden.     

A normalised residence time transport equation for the numerical simulation of combustion with high-temperature air

This study concerns the numerical simulation of turbulent non-premixed combustion in highly preheated air streams. One of the objectives is to settle an efficient computational procedure to proceed with the numerical simulation of large-scale industrial devices. It is also expected that the availability of such a computational framework may facilitate comprehensive sensitivity analyses as well as the development of mathematical models able to represent turbulence-chemistry interactions (TCI) in such conditions. Based on the salient physical ingredients that characterise scalar mixing, propagation, and self-ignition processes, a turbulent combustion modelling framework is thus introduced and applied to the numerical simulation of well-documented laboratory flames. In the corresponding geometries, the bulk flow velocities of the reactants streams can reach rather large values, which lead the flame to lift from the burner rim. Partially premixed flame edges thus stabilise the whole flame structure and the temperature of the oxidising stream can be increased by vitiation with burned gases so as to promote the corresponding flame-stabilisation processes. For sufficiently large values of the vitiated airstream temperature, self-ignition mechanisms may be triggered thus leading to a competition between mixing, propagation, and ignition processes. In this context, the ratio of the residence time to the self-ignition delay is thought to be a relevant variable to delineate the possible influence of ignition phenomena. Therefore, a modelled transport equation for this normalised residence time is considered. The performance of the corresponding modelling proposal is analysed with special emphasis placed on its ability to reproduce ‘memory’ or ‘lagrangian’ effects related to thermal aging processes. In this respect, it is noteworthy that the present set of computations makes use of tabulated quantities associated to (i) steady laminar one-dimensional diffusion flamelets, so as to describe the composition of combustion products, (ii) steady laminar one-dimensional premixed flamelets, to describe the flame brush propagation, and (iii) temporal evolution of zero-dimensional homogeneous mixtures to account for the possible occurrence of self-ignition phenomena. In particular, the tabulated self-ignition time value is used to evaluate the increase in the normalised residence time. Finally, two modelling parameters are put into evidence and studied through a detailed sensitivity analysis.     

Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

Real‐Time Monitoring of Transport of Chlorinated Hydrocarbons from Industrial Areas Using Open‐Path FTIR Spectrometry with COL1SB

Abstract

Open‐path Fourier transform infrared (FTIR) spectrometry was used to continuously monitor 11 chlorinated hydrocarbon species in the region connecting two different industrial complexes for 24 hr. The single‐beam spectra obtained from open‐path FTIR were analyzed by newly developed software named COL1SB, which generates site‐specific background spectra as well as path‐averaged water vapor concentrations in addition to performing regression analyses. The path‐averaged water vapor concentrations calculated by the COL1SB agreed very well with those measured by a thermo‐hygrometer. In addition, site‐specific background spectra were generated by accounting for chemical absorption of 50 chemical species. The accurate estimation of path‐averaged water vapor concentrations, as well as the usage of site‐specific background spectra, enables chlorinated hydrocarbons to be measured by open‐path FTIR spectrometry at the ppb level. Among 11 chlorinated hydrocarbons considered here, trichlorofluoromethane, carbon tetrachloride, trichloroethylene, and tetrachloroethylene were identified as major chlorinated hydrocarbons having concentrations above 1 ppb. Wind affected the temporal variations of these chlorinated hydrocarbons, indicating the importance of local transport. However, the effect of wind differed from one species to another because of different source characteristics.     

Spectroscopic Studies of the Stability of Doped Polythiophenes Under Air

Abstract

The stability of the doped state of conductive polythiophenes under air was investigated by the use of Infrared (IR) and UV-visible (UV) spectroscopies. Poly(3-methyl thiophene) doped with BF₃-ethyl ether (BFEE). shows higher stability due to its stereoregularity-chain structure. While the doped polythiophene (PT) degrades easily under the moisture.     

采暖居住建筑实施节能65%--围护结构传热系数的确定

以围护结构的耗热量指标、传热系数限值和门窗空气渗透耗热量为重点,对严寒地区居住建筑实施节能65%进行了分析,提出围护结构各部分的传热系数限值.对围护结构如何实现节能65%的要求,从围护结构构造和技术角度进行了讨论;并阐述降低门窗部位的空气渗透耗热量是下一步节能的关键.     

冰蓄冷空调系统设备选择的数学模型及简化求解

从工程经济学角度,引进等额年金,设计日负荷修正系数,得出冰蓄冷空调系统设备选择的目标函数,对各参数进行赋值,求得最佳的系统设备选择,并用一个工程实例验证,结果表明此数学模型是有效的。所得的结论可供设计者在设汁时参考。     

气体压强对纳秒激光诱导空气等离子体特性的影响

环境气体的压强对激光诱导等离子体特性有重要影响.基于发射光谱法开展了气体压强对纳秒激光诱导空气等离子体特性影响的研究,探讨了气体压强对空气等离子体发射光谱强度、电子温度和电子密度的影响.实验结果表明,在10-100 kPa空气压强条件下,空气等离子体发射光谱中的线状光谱和连续光谱依赖于气体压强变化,且原子谱线和离子谱线强度随气体压强的变化有明显差别.随着空气压强增大,激光击穿作用区域的空气密度增加,造成激光诱导击穿空气几率升高,从而等离子体辐射光谱强度增大.空气等离子体膨胀区域空气的约束作用,增加了等离子体内粒子间的碰撞几率以及能量交换几率,并且使离子-电子-原子的三体复合几率增加,因此造成原子谱线OⅠ777.2 nm与NⅠ821.6 nm谱线强度随着气体压强增大而增大,在80 kPa时谱线强度最高,随后谱线强度缓慢降低.而离子谱线N Ⅱ 500.5 nm谱线强度在40 kPa时达到最大值,气体压强大于40 kPa后,谱线强度随压强增加而逐渐降低.空气等离子体电子密度均随压强升高而增大,在80 kPa后增长速度变缓.等离子体电子温度在30 kPa时达到最大值,气体压强大于30 kPa后,等离子体电子温度逐渐降低.研究结果可为不同海拔高度的激光诱导空气等离子体特性的研究提供重要实验基础,为今后激光大气传输、大气组成分析提供重要的技术支持.