Synthesis and Comparison of Extraction Properties of p‐tert‐Butylcalix[n]arene Nitrile Derivatives for Selected Metals and Dichromate Anions

The article describes the syntheses and extraction properties of two p‐tert‐butylcalix[6]arene nitrile derivatives (3 and 4). The trinitrile derivative 3 has been synthesized from 5,11,17,23,29,35‐hexa‐tert‐butyl‐37,38,39,40,41,42‐hexahydroxycalix[6]arene 1. The compound 1 was directly converted to its hexanitrile derivative 4. In these syntheses, it was thought to explore the role of nitrile sites in the extraction of various metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions. The liquid‐liquid extraction properties of 3 and 4 towards selected alkali/transition metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions are reported. It has been observed that receptor 3 does not extract alkali/transition metal cations effectively, but shows affinity towards HCr₂O₇ ^?/Cr₂O₇ ^2? anions at low pH. The compound 4 is an effective form for transferring Ni²⁺ selectively, while it shows poor transferring ability for HCr₂O₇ ^?/Cr₂O₇ ^2? anions from an aqueous into a dichloromethane layer. It was observed that the cavity size of the calix[n]arenes and the cooperativity of the functionalities play important roles in two phase extraction systems.     

Synthesis,binding and fluorescence studies of a new neutral H-bonding receptor for anions based on 3,5-bis(trifluoromethyl)phenylurea

The synthesis and anion binding studies of the new neutral receptor 1,1′-(2,2′-(4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-diyl)bis(2-oxoethane-2,1-diyl))bis(3-(3,5-bis(trifluoromethyl)phenyl)urea) (L1) are reported. L1 is a macrocyclic ligand containing the 3,5-trifluoromethylphenylureido-binding fragment attached as a side arm on the tetraazacyclododecane. L1 is soluble in numerous organic solvents; the binding properties of L1 towards several simple anions (G) were investigated by NMR, UV–vis and fluorescence techniques in DMSO and CH₃CN solutions. L1 is able to bind F^? , Cl^?  and AcO^?  in both solvents; in addition, it binds Br^?  in CH₃CN. Fluoride shows the highest constant values in the halide series (F^?  > Cl^?  > Br^? ) and AcO^?  is the most strongly bound among all the anions investigated. L1 is able to signal the presence of the anions in solution by fluorescence change; in the case of acetate, this occurs in the visible range.     

A Novel and Efficient Synthesis of 2,3-Dichloroquinoline

2,3-Dichloroquinoline was prepared in three steps in good overall yield from commercial 3-bromoquinoline via N-oxide formation and rearrangement to 3-bromocarbostyril, followed by a one-pot conversion to 3-bromo-2-chloroquinoline and halogen exchange to the title compound.     

Generation of light-induced electrical potential from ion exchange membranes containing 4,4′-bipyridine moiety. II. Effect of species of anion exchange membranes on photovoltage

Various anion exchange membranes containing the 4,4′-bipyridine moiety as anion exchange groups were prepared from membranous copolymers of chloromethylstyrene and divinylbenzene and membranes of chloromethylated polysulfone and 4,4′-bipyridine. After evaluating the electrochemical properties of the obtained anion exchange membranes, the effect of membrane species on the generation of a photovoltage was examined by irradiation using a xenon lamp. The membranes swelled with ethylene glycol were clamped between two ITO electrodes and sealed by adhesive. The generated photovoltage and photocurrent from about a 120 μm thick membrane were about 80 mV and 400 nA, respectively, in a 200K Ω load resistance, though dependent of membrane species. The voltage decreased with increasing crosslinking by the divinylbenzene in the copolymer membranes. The effect of counter ion species on the voltage was examined and a chloride ion form of membrane showed the highest photovoltage. The membranes with different thicknesses, which were prepared from polysulfone derivatives, were evaluated and the voltage decreased with decreasing thickness. Even a porous membrane from polysulfone derivatives showed a photovoltage though a porous membrane in which a methyl viologen ethylene glycol solution had been impregnated did not have a stable voltage. Also, the anion exchange membrane containing the benzyl trimethylammonium moiety, which is the conventional anion exchange groups, did not show a high and stable photovoltage upon photoirradiation. © 1996 John Wiley & Sons, Inc.     

Alkaline Stable Anion Exchange Membranes Based on Cross-Linked Poly(arylene ether sulfone) Bearing Dual Quaternary Piperidines for Enhanced Anion Conductivity at Low Water Uptake

Alkaline stable anion exchange membranes based on the cross-linked poly(arylene ether sulfone) grafted with dual quaternary piperidine (XPAES-DP) units were synthesized. The chemical structure of the synthesized PAES-DP was validated using ¹H-NMR and FT-IR spectroscopy. The physicochemical, thermal, and mechanical properties of XPAES-DP membranes were compared with those of two linear PAES based membranes grafted with single piperidine (PAES-P) unit and conventional trimethyl amine (PAES-TM). XPAES-DP membrane showed the ionic conductivity of 0.021 S cm⁻¹ at 40 °C which was much higher than that of PAES-P and PAES-TM because of the possession of more quaternary ammonium groups in the cross-linked structure. This cross-linked structure of the XPAES-DP membrane resulted in a higher tensile strength of 18.11 MPa than that of PAES-P, 17.09 MPa. In addition, as the XPAES-DP membrane shows consistency in the ionic conductivity even after 96 h in 3 M KOH solution with a minor change, its chemical stability was assured for the application of anion exchange membrane fuel cell. The single-cell assembled with XPAES-DP membrane displayed a power density of 109 mWcm⁻² at 80 °C under 100% relative humidity.     

BEDT-TTF-based radical cation salt with the cyanurate anion: synthesis,structure, conductivity,and polarized reflection spectra

The new conducting radical cation salt, bis(ethylenedithio)tetrathiafulvalene cyanurate, was synthesized. This salt is an organic metal down to 4 K. The crystal structure, conductivity, and optical properties of the salt were studied. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 96–101, January, 2008.     

Improved Calcium Ion-Selective Electrode Based on a Neutral Carrier

Abstract

The performance of a liquid-membrane electrode using a synthetic, neutral carrier in o-nitro-phenyl-n-octyl-ether as membrane component in a PVC matrix, in the presence of sodium tetra-phenyl-borate, is described. Selectivities, working range, lifetime and anion interference are discussed. The electrode makes possible the measurement of calcium ion activities in the range 10^?1M to 10^?6M in unbuffered and in the range 10^?1M to 10^?8M in calcium buffered systems respectively. The selectivities of calcium over protons, magnesium, sodium and zinc are 25,000, 26,000, 2,800 and 7,100, respectively, and are far superior than those reported for other calcium sensors.     

Anion-Responsive Fluorescent Supramolecular Gels

Three novel bis-urea fluorescent low-molecular-weight gelators (LMWGs) based on the tetraethyl diphenylmethane spacer—namely, L1, L2, and L3, bearing indole, dansyl, and quinoline units as fluorogenic fragments, respectively, are able to form gel in different solvents. L2 and L3 gel in apolar solvents such as chlorobenzene and nitrobenzene. Gelator L1 is able to gel in the polar solvent mixture DMSO/H₂O (H₂O 15% v/v). This allowed the study of gel formation in the presence of anions as a third component. An interesting anion-dependent gel formation was observed with fluoride and benzoate inhibiting the gelation process and H₂PO₄⁻, thus causing a delay of 24 h in the gel formation. The interaction of L1 with the anions in solution was clarified by ¹H-NMR titrations and the differences in the cooperativity of the two types of NH H-bond donor groups (one indole NH and two urea NHs) on L1 when binding BzO⁻ or H₂PO₄⁻ were taken into account to explain the inhibition of the gelation in the presence of BzO⁻. DFT calculations corroborate this hypothesis and, more importantly, demonstrate considering a trimeric model of the L1 gel that BzO⁻ favours its disruption into monomers inhibiting the gel formation.     

C-spaces and matrix of infinite-dimensionality

We investigate classes (m,n)-C which are intermediate between the class S-wid of weakly infinite-dimensional spaces in the sense of Smirnov and the class S-∞-C of finite C-spaces in the sense of Borst. We find relationships between classes (m₁,n₁)-C and (m₂,n₂)-C. It allows us to construct a matrix of infinite-dimensionality.     

An Ultrafast Molecular-Rotor-Based Fluorescent Turn-On Sensor for the Perrhenate Anion in Aqueous Solution

Devising sensors for the perrhenate anion in aqueous media is extremely challenging, and has seldom been reported in the literature. Herein, we report a fluorescence turn-on sensor for the perrhenate anion in aqueous media based on the aggregation-induced emission of a popular ultrafast molecular rotor dye, Thioflavin-T. The selective response towards the perrhenate anion has been rationalized in terms of matching water affinity, with the weakly hydrated perrhenate anion spontaneously forming a contact ion pair with the weakly hydrated ultrafast molecule-rotor-based organic cation, Thioflavin-T, which in turn leads to an aggregate assembly that provides a fluorescence turn-on response towards perrhenate. The sensing response of Thioflavin-T has been found to be quite selective towards the perrhenate anion when tested against anions that are ubiquitously present in the environment, such as chloride, nitrate, and sulfate anions. The formation of self-assembled Thioflavin-T aggregates has also been investigated by time-resolved emission and temperature-dependent measurements.