Static atomic displacements of Sn in disordered NiAs/Ni2In type HT-Ni1+δSn

The crystal structures of the intermediate solid solution HT (high temperature) Ni_1+δSn with δ=0.28, 0.52 and 0.61 (refined Ni contents) have been analyzed in detail by X-ray diffraction on single crystals. The previously reported basic atomic arrangement, i.e., a NiAs/Ni₂In structure type (P6₃/mmc, Ni(1) on 2a, 0 0 0, Ni(2) with an occupancy δ on 2d, and Sn on 2c, ), is confirmed. However, strong anisotropic atomic displacements occur for Sn within the a-b plane of the hexagonal unit cell, which require a Gram-Charlier expansion of the probability density function of Sn in order to obtain a good fit to the diffraction data. Direction, magnitude and the concentration dependence of the displacements can be interpreted in terms of the geometrical requirements of the different local atomic configurations in the planes z=±1/4, so that the displacements can be identified as static ones.     

Study of metal-loaded activated charcoals for the separation and determination of selenium species by energy dispersive X-ray fluorescence analysis

Conversion of adsorption properties of activated charcoal (C^∗) by metal modification towards selenite, selenate and seleno-dl-methionine (Se-Met) was studied. Several metals were included in modification studies and also a procedure was developed for the separation and independent determination of microgram quantities of these selenium species in aqueous solution. Selenium species were collected one by one from the same sample solution onto collector material by adsorbing them directly or after complex formation onto different metal-loaded activated charcoals (MgC^∗ and FeC^∗). The mass of selenium in these collectors was measured directly by energy dispersive X-ray fluorescence spectrometry (EDXRF). Detection limits for all three selenium species were better than 6 μg corresponding to concentration of 60 μg/l with 0.100 l of initial sample volume.     

全硅FER沸石上有机吸附物脱附行为的研究

运用热分析技术,研究吸附在体相和表面结构完美的单晶状疏水全硅FER沸石孔道中的有机化合物的脱附行为,测定亲和性指数AT值和负载量。所研究的吸附质为直链烷烃、直链烷基醇、直链烷基胺等,结果显示醇有较低的AT值,而直链烷烃有较高的AT值,胺类有最高的AT值。证明全硅FER沸石骨架对烷基、胺基呈现出强的"亲和性",而对羟基呈现出“憎性”。同时还发现吸附质的链长对脱附性质、AT值也有较大影响。     

ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

焙烧富集分离－氢化物原子荧光法测定地质物料中痕量硒

本文研究了一种焙烧富集分离、氢化物－原子荧光法测定地质物料中痕量Ｓｅ的方法。系统地研究了Ｓｅ富集分离条件、考查了３０多种元素在焙烧前后对测定Ｓｅ的影响，在选定的最佳实验条件下，方法检出下限为０．０１μｇ／ｇ，线性范围为０．００１～０．３μｇ／ｍＬ。样品中Ｓｅ含量水平为０．０３６μｇ／ｇ和０．０８９μｇ／ｇ时的测量精度（ＲＳＤ）分别为１０％和５．８％。加标回收率为９７～９９％。采用本方法分析了２６个地球化学标准参考样中痕量硒，获得满意结果。     

Internally contracted multiconfiguration-reference configuration interaction calculations for excited states

Summary The calculation of electronically excited states with the internally contracted multiconfiguration-reference configuration interaction (CMRCI) method is discussed. A straightforward method, in which contracted functions for all states are included in the basis, is shown to be very accurate and stable even in cases of narrow avoided crossings. However, the expense strongly increases with the number of states. A new method is proposed, which employs different contracted basis sets for each state, and in which eigensolutions of the Hamiltonian are found using an approximate projection operator technique. The computational effort for this method scales only linearly with the number of states. The two methods are compared for various applications.Dedicated in honor of Prof. Klaus Ruedenberg     

A hybrid approach combining energy density analysis with the interaction energy decomposition method

We propose a new analysis technique for characterizing molecular interactions that combines an energy decomposition scheme, such as the Kitaura-Morokuma decomposition method, with energy density analysis, which partitions the total energy of the system into atomic contributions. The combined scheme, termed Interaction-EDA, enables us to estimate the local contribution of interaction energy components, such as electrostatic, exchange, polarization, and charge transfer. The evaluation of the local interaction energy is rather important in large systems. For a numerical assessment, the Interaction-EDA method is applied to the process of CO adsorption on Si(100) - (2 x 1) surface.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Dielectric studies of binary mixtures of n -propyl alcohol and ethylenediamine

Dielectric constant (ε’) and dielectric loss (ε") of n-propyl alcohol (PA), ethylenediamine (EDA) and their binary mixtures, for different mole fractions of ethylenediamine have been experimentally measured at 11.15 GHz microwave frequency. Values of density (ρ), viscosity (η) and square refractive index (n _D ² ) of binary mixtures as well as those of pure liquids are reported. Excess square refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of complexes in the system.