测定水性聚氨酯树脂平均相对分子质量及其分布的高效凝胶渗透色谱法

选用HP PL gel MIXED-B柱双柱串联，四氢呋喃作流动相，紫外吸收检测器测定了水性聚氨酯树脂的平均相对分子质量及其分布；通过一系列的条件试验，确定了最佳的凝胶色谱（GPC）条件，结果令人满意；该研究有助于了解水性聚氨酯树脂性能，有效地指导工艺生产和基础研究。     

Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions

Biodegradable polyurethanes are an interesting alternative to many applications that involve plastics since they can minimize environmental problems caused by the low rates of natural degradation of synthetic polymers. In addition, since waterborne polyurethanes are based on aqueous dispersions, they restrict the use of organic solvents during processing and application of the polymer, thus contributing furthermore to reduce environmental damage. In this work, aqueous anionic polyurethane dispersions (PUD) with tailorable susceptibility for hydrolysis were synthesized by progressively replacing polypropylene glycol (PPG) with a biodegradable polycaprolactone diol (PCL) as soft segments. The hard segments were formed by extending isophorone diisocyanate (IPDI) with hydrazine (HZ). Dimethylol propionic acid (DMPA) was used as ionic center and triethyl amine (TEA) as neutralizer. The degree of phase separation was evaluated mainly by infrared spectroscopy (FTIR) and small angle X-ray scattering (SAXS). The results indicated that phase separation between hard and soft segments of poly(ester-urethane) is more significant than that of poly(ether-urethane). Data obtained from SAXS experiments indicated that phase separation within soft domains can also be present in samples containing both polyester and polyether soft segments. Hydrolytic degradation of the polymers in buffer solution of pH 7.4 and alkaline solution was performed as an initial test. The results showed that the fraction of polyester soft segments in the polyurethanes can be used to tailor the susceptibility of the materials to hydrolytic attack. Polyurethanes having higher contents of polyester were more promptly hydrolytically degraded than polyurethanes containing only polyether segments.     

离聚体水基微乳液化的研究——聚苯乙烯离聚体微乳化过程相反转的表征

以乙酰磺酸为磺化剂制备磺化度为３～１５ｍｏｌ％的磺化聚苯乙烯（ＳＰＳ）并中和成盐．在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液．用乳化过程中体系电导率和粘度的变化表征了乳化相反转过程．研究了溶剂的极性和离子含量对聚苯乙烯离聚体溶液可乳化性和乳化过程及乳液稳定性的影响．     

Dynamic control of volume phase transitions of poly(N‐isopropylacrylamide) based microgels in water using hydrazide‐aldehyde chemistry

We demonstrate that the volume phase transition temperature (VPTT) of copolymer microgel particles made from N‐isopropylacrylamide (NIPAm) and methacryloyl hydrazide (MH) can be tailored in a reversible manner upon the reaction of the hydrazide functional groups with aldehydes. The microgels were synthesized by precipitation polymerization in water. Due to the water‐soluble nature of the MH monomer, the VPTT at which the microgel particles contract shifts to higher values by increasing the incorporated amounts of methacryloyl hydrazide from 0 to 5.0 mol %. The VPTT of the copolymer microgel dispersions in water can be fine‐tuned upon addition of hydrophobic/hydrophilic aldehydes, which react with the hydrazide moiety to produce the hydrazone analogue. This hydrazone formation is reversible, which allows for flexible, dynamic control of the thermo‐responsive behavior of the microgels. The ability to “switch” the VPTT was demonstrated by exposing hydrophilic streptomycin sulfate salt incubated microgel particles to an excess of a hydrophobic aldehyde, that is benzaldehyde. The temperature at which these microgels contracted in size upon heating was markedly lowered in these aldehyde exchange experiments. Transformation into benzaldehyde hydrazone derivatives led to assembly of the microgel particles into small colloidal clusters at elevated temperatures. This control of supracolloidal cluster formation was also demonstrated with polystyrene particles which had a hydrazide functionalised microgel shell. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1745–1754     

Strong covalent bonding modulated graphene oxide/epoxy interfacial enhancement and advanced corrosion resistance

Abstract

Chemically functionalized graphene oxide [multi-amino functionalized graphene oxide (MAGO)] was achieved by building covalent bonds between graphene oxide (GO) and a small molecule containing benzene structure and multi-amino groups. Fourier transform infrared, X-ray diffraction, X-ray photo electron spectroscopy and TEM-EDX results certified that the molecule was successfully grafted onto GO nanosheets. Subsequently, functionalized GO was incorporated into waterborne epoxy (EP) coating through ball-milling method. This molecular design can significantly improve the dispersion of MAGO in EP matrix, as well as the compatibility and interaction between MAGO and EP. Compared with GO/EP, the water absorption of MAGO/EP decreased from 4.38 to 2.59%, the adhesion strength of MAGO/EP increased from 4.72 to 6.32?MPa after immersion of 40?days in 3.5% NaCl solution. Incorporation of 1?wt% of MAGO into EP matrix prominently improved the long-term corrosion resistance. The impedance modulus of GO/EP coating decreased by four orders after 40 days immersion, while that of MAGO/EP coating only decreased by one order. The impedance modulus was still 1.47?×?10⁸ Ω cm², and two-time constant wasn’t detected for MAGO/EP coating. This research developed a novel green anticorrosion coating with enhanced durability for metal protection.     

Properties of Aqueous Polyurethane Dispersion Modified by Epoxide Resin and Their Use as Adhesive

The aqueous polyurethane hybrid dispersion modified by the epoxy resin were synthesized using 1,4-butanediol ( BDO ) and dimethylolpropionic(DMPA) as chain extenders. A kind of automobile interior decoration adhesive was made by the modified hybrid dispersions. Effects of the content and the kinds of epoxide resin on the properties of dispersions and dispersion-cast films such as appearance, pot life, viscosity, particle size, molecular mass, hardness, swelling in water, contact angle, strength of stress, elongation at break, and other mechanical properties were studied. At the same time the effect of the E20 content on the peel strength of the adhesive for several automobile interior decoration substrates such as rubber/wood, poly(vinyl chloride)/wood; leather/wood, sponge/wood was investigated. The experimental results show that when the epoxy resin E20 content was 8%, the modified polyurethane hybrid dispersions possess better properties and the adhesive made by the modified dispersions posses better adhesion for automobile interior decoration substrates. The stress-strain curve of the modified aqueous polyurethane hybrid dispersions films shows the modified aqueous cast films possess better rigidity and toughness.     

Scaling in Electrical Conductivity Measurements and Rheological Measurements of Monarch 700 Dispersions Stabilized by Polymers

For making stable dispersions of graphitic carbon black (Monarch 700), the effectiveness of three dispersants/polymers (hypermer LP1, hypermer B246, and OLOA 11000) in xylene is investigated. Hypermer LP1 (polyhydroxystearic acid) is a homopolymer and hypermer B246 (PEG 30-dipolyhydroxystearate) is a polyhydroxystearic acid/polyethylene oxide/polyhydroxystearic acid ABA block copolymer, while OLOA 11000 (polyisobutylene succinimide) has a polar head group (polyamine) attached to a hydrocarbon chain (polyisobutylene). Well-dispersed graphitic carbon black dispersions were prepared using dispersants at optimum concentrations. Percolation threshold and rheological threshold were determined by analyzing the variations in electrical conductivity and elastic modulus with concentration of carbon black. Above threshold concentration, scaling law was applied to experimental data of rheology (dynamic measurements) and electrical conductivity measurements to evaluate quality of the system. Effectiveness of polymers was investigated on the basis of value of critical exponent (t and t′, respectively) in scaling power law. Hypermer LP1 was proved to be a poor dispersant for Monarch 700 dispersions while other two polymers were found to be effective stabilizers.     

INDUSTRIAL NEWS

Interactions between monolayers of trilaurylamine (TLA) and various water-soluble corrosion, hydrate and scale inhibitors, as well as acetic acid and FeCl₂, have been studied by means of the Langmuir technique, The water-soluble compounds were present in the subphase before TLA was spread. Their influence on the monolayer properties were measured by means of surface pressure-area ( k-A) isotherms and constant surface pressure-area relaxation measurements. All the added water soluble species gave rise to monolayer expansion. The monolayer expansion observed for TLA at pH 1, increased when FeCl₂ was added to the subphase at the same pH. Polyethyleneglycols with molecular weight higher than 200 destabilized totally the TLA-monolayer, probably due to bending and folding into multilayers. Monolayer expansion and film instability increased with increased acetic acid concentrations. The destabilization mechanism in this case was most likely due to a combination of nucleation and dissolution of film components into the subphase. The corrosion inhibitor Dyno KI 384 had a higher surface activity than TLA. Hence the monolayer     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

Aeolian transport of sand

The airborne transport of particles on a granular surface by the saltation mechanism is studied through numerical simulation of particles dragged by turbulent air flow. We calculate the saturated flux q_s and show that its dependence on the wind strength u_* is consistent with several empirical relations obtained from experimental measurements. We propose and explain a new relation for fluxes close to the threshold velocity u_t, namely, q_s=a(u_*-u_t)^α with α≈2. We also obtain the distortion of the velocity profile of the wind due to the drag of the particles and find a novel dynamical scaling relation. We also obtain a new expression for the dependence of the height of the saltation layer as function of the strength of the wind.