Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

Comparison of sediment pollution in the rivers of the Hungarian Upper Tisza Region using non-destructive analytical techniques

The rivers in the Hungarian Upper Tisza Region are frequently polluted mainly due to mining activities in the catchment area. At the beginning of 2000, two major mining accidents occurred in the Romanian part of the catchment area due to the failure of a tailings dam releasing huge amounts of cyanide and heavy metals to the rivers. Surface sediment as well as water samples were collected at six sites in the years 2000–2003, from the northeast-Hungarian section of the Tisza, Szamos and Túr rivers. The sediment pollution of the rivers was compared based on measurements of bulk material and selected single particles, in order to relate the observed compositions and chemical states of metals to the possible sources and weathering of pollution. Non-destructive X-ray analytical methods were applied in order to obtain different kinds of information from the same samples or particles. In order to identify the pollution sources, their magnitude and fate, complementary analyses were carried out. Heterogeneous particulate samples were analyzed from a large geographical territory and a 4-year time period. Individual particles were analyzed only from the “hot” samples that showed elevated concentrations of heavy metals. Particles that were classified as anthropogenic were finally analyzed to identify trace concentrations and chemical states of heavy metals.     

Radiation grafting from binary monomer mixtures. I. Vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol

Gamma-radiation grafting of vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol (VEEG) on polyethylene films has been studied from binary monomer mixtures. The effect of co-monomer composition and total exposure radiation dose on the grafting process is investigated. A combination of potentiometric and gravimetric techniques is applied to determine the grafting degree of each monomer in the final graft copolymer. The presence of more active monomer VEEG in the mixture was found to enhance the grafting of both monomers because the increasing of copolymerization rate which in turn increases the total grafting degree. The modification of the hydrophilic properties of the graft copolymer is studied by examining the grafted films for water- and copper (II) ions uptake.     

Simultaneous Determination of Various Classes of Pesticides Using Micellar Electrokinetic Capillary Chromatographyin Combination with Solid-Phase Extraction

The potential of micellar electrokinetic capillary chromatography (MEKC) with UV-detection for the simultaneous determination of various selected pesticides in water samples was investigated. The developed method using solid-phase extraction showed high efficiency and good resolution with detection limits in the 0.2 to 0.5 ppm range. Comparison of several SPE cartridges demonstrates their suitability for the extraction of pesticides with different hydrophobicity achieving 5000-fold enrichment. The described method involving SPE procedure and MEKC separation enables the successful determination of a wide spectrum of pesticides in water in the range of maximum residue limits (MRLs).     

Measurements of HO2 uptake coefficient on aqueous (NH4)2SO4 aerosol using aerosol flow tube with LIF system

The γ(HO₂) was elevated with increase of Cu(II) concentrations in aqueous (NH₄)₂SO₄ aerosol. The threshold of Cu(II) concentration was 10^-3 mol/L for the dramatic increase of γ(HO₂) to 0.1, suggesting sensitive γ(HO₂) value to concentration of transition metal ions in aerosol.     

Measuring trihalomethane concentrations in water using supported capillary membrane sampling-gas chromatography

The objective of this study was to develop and evaluate a supported capillary membrane sampling-gas chromatography method for the analysis of trihalomethanes (THMs) in drinking water. The effects of experimental parameters, such as flow rate of carrier gas, water temperature, ionic strengths of solutions and transfer line temperature on the system performance were investigated. The results of method detection limit and accuracy and precision studies are reported.     

Catalytic air oxidation of manganese in synthetic waters

An attempt was made to study the oxidation of manganese by air in synthetic waters. A series of batch experments were performed at differnet values of concentration, temperature and pH. Unoxidized manganese in the solution was determined by formaldoxime spectrometric method. Results of these studies indicated that the air oxidation of manganese soluble in water can be effectively performed in basic media and that oxidation yield increasedwith an increase in pH and concentration. The yield was very high in the presence of manganese dioxide, sepiolite or clinoptilolite in solution and, the oxidation was almost completed especially at high values of pH and concentration. The reaction was found to be first order with respect to Mn²⁺ with a very low activation energy. A yield of 62% was obtained for the air oxidation of wastewater taken from the treatment plant of Corum Municipality.     

Underwater sediment analyses by laser induced breakdown spectroscopy and calibration procedure for fluctuating plasma parameters

Laser Induced Breakdown Spectroscopy (LIBS) was applied on sediments directly under water. The aim of the research was to develop a method for measuring the sediment elemental composition, including minor elements, which could be implemented in-situ. The plasma was generated by a double-pulse, Q-Switched Nd:YAG laser operated at 1064 nm. For signal detection, both ICCD and non-gated, compact detectors were used. The major difficulties in underwater sediment analyses are related to the natural and laser induced surface roughness, and to the sample softness. The latter is responsible for the formation of particle clouds above the surface, which scatter both the laser and plasma radiation, and often results in breakdown formation above the analyzed surface. In such cases, a broad sonoluminescence emission from water, formed during the gas bubble collapse was sometimes registered. Under optimized experimental conditions, even by using a non-gated detector and single shot acquisition, it was possible to detect several minor sediment constituents, such as titanium, barium, manganese and others. A crude estimation of the Limit of Detection (LODs) for these elements was performed by underwater measurements on certified soils/sediments. Due to strong shot-to-shot fluctuations in the plasma temperature, well correlated calibration curves, aimed for quantitative analyses, could only be obtained after applying an appropriate data processing procedure. The latter selects automatically only the spectra characterized by similar plasma parameters, which are related to their continuum spectral distribution. Application of such a procedure improves the measurement accuracy also in other surroundings and on samples different from the ones analyzed here.     

Volumetric properties of ethanol–water mixtures under high temperatures and pressures

The densities of ethanol and ethanol–water mixtures were measured with a vibrating tube densimeter at 25.0, 50.0 and 75.0 °C in the pressure range from 0.10 to 40.00 MPa. Densities were correlated using an empirical model. Partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures were calculated from obtained densities. This study reports the dependence of densities, partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures on composition, temperature and pressure.     

Effects of Oxygen and Water Vapor on Volatile Organic Compounds Decomposition Using Gliding Arc Gas Discharge

The combined effects of oxygen and water vapor on three typical volatile organic compounds, i.e. tetrachloromethane, n-butane and toluene, decomposition efficiency under gliding arc gas discharge conditions are studied. The electron density and the density of the reactive radicals such as O and OH are modified by addition of oxygen and water vapor. Consequently, the decomposition process can be enhanced or suppressed, depending on the involved chemical structures and reaction channels. The addition of oxygen and water vapor suppresses the tetrachloromethane decomposition which indicates that this process is mainly controlled by the electron dissociation reactions. By contrast, the n-butane and toluene decompositions are enhanced, which shows that they can be mainly ascribed to the radical induced reactions. Especially, in a moist atmosphere the OH radicals are supposed to play the most important role in the n-butane decomposition process.