The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

The crystal structure of CuVo3(II), a high-pressure ilmenite phase

The crystal structure of a second high-pressure copper vanadate phase, CuVO₃(II), has been determined and refined by full-matrix least-squares procedures using automatic diffractometer data to a residual R = 0.042 (R_w = 0.051). The space group is rhombohedral, $\text{R}\text{3}$, with hexagonal unit cell a = 4.966(2) and c = 14.084(5) Å [a_R = 5.501(2) Å and α = 53.66(3)°]. The structure is the fully ordered ilmenite-type and, on the basis of published magnetic data and the interatomic distances, the valence distribution Cu⁺V⁵⁺O₃ is proposed. This represents a unique example of Cu⁺ in an octahedral environment.     

Volume and compressibility changes of complex formation between 18-Crown-6 and NaCl,KCl, and CsCl in water

The apparent molal volumes and compressibilities of NaCl, KCl, and CsCl in mixtures of 18-Crown-6 and water have been calculated from density and speed-of-sound measurements at 25°C. The partial molal volumes and compressibilities of the salts when all cations have formed complexes with 18-Crown-6 molecules have been evaluated. The sign and magnitude of the volume and compressibility changes of complex formation strongly suggest that the charge of the cation becomes very effectively screened by the crown ether.     

Analysis of primary aliphatic short-chain monoamines by LC in water samples

Several derivatization procedures with o-phthaldialdehyde-N-acetylcysteine (OPA-NAC) were compared for a rapid analysis of primary aliphatic short-chain monoamines in water samples by HPLC using a LiChorospher analytical separation column (100RP₁₈ mm i.d., 5 μm). Both the solution and the solid-support assisted off-line derivatization on C₁₈ SPE cartridges were inadequate options because of beginning degradation processes of the instable isoindol derivatives during their transfer to the analytical column. This problem was precluded with the on-column or solid-support assisted on-line derivatization. In the last mentioned procedure, the derivatization took place in a Hypersil C₁₈ precolumn ( mm i.d., 30 μm) connected with an additional preconcentration step resulting in better detection limits (0.002-0.040 μg ml⁻¹ requiring only 150 μl of water sample) than in the on-column procedure (0.08-0.16 μg ml⁻¹). The improved sample handling, the better control of parameters affecting reaction rates, the fully automation of this method with only 10 min analysis time for each sample are further advantageous. The potential of the solid-support assisted on-line derivatization was outlined and applied to water samples from several sources. Recovery values near 100% were obtained.     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

Experimental and theoretical study of vibrational spectra and structure of dihalogermylene and dihalostannylene complexes with 1,4-dioxane and triphenylphosphine

Vibrational (Raman and IR) spectra of the 1:1 complexes of dihalogermylene and dihalostannylene with 1,4-dioxane and PPh₃ have been reported, the structures of the complexes Cl₂Ge·C₄H₈O₂ and Cl₂Ge·PPh₃ updated using high-resolution X-ray method. Quantum-chemistry calculations of the geometry and normal mode frequencies and eigenvectors were carried out for some of the complexes. The results show that in the structure of the polymeric solid complexes of X₂M with 1,4-dioxane, intermolecular coordination XM plays a prominent role, whereas the corresponding complexes with PPh₃ are monomeric. In the vibrational spectra of all the complexes, an inversion of symmetric and antisymmetric stretching νXM (X=Cl, Br; M=Ge, Sn) frequencies, found for ‘free’ X₂M^II particles, still persists, suggesting that the X₂M moieties preserve their specifity as carbene analogues also in the complexes.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Adsorption of water molecules in slit pores

We report molecular dynamics (MD) simulations on the adsorption of water in attractive and repulsive slit pores, where the slit and a bulk region are in contact with each other. Water structure, surface force and adsorption behavior are investigated as a function of the overall density in the bulk region. The gas–liquid transition in both types of pores occurs at similar densities of the bulk region.     

Hydrogenation of ethyl esters of 4-phenyl-and (2-furyl)-substituted 2,4-dioxobutyric acids at palladium black

The hydrogenation of ethyl 4-R-2,4-dioxobutyrates (R = phenyl, 2-furyl) at 5% Pt/Al₂O₃ catalyst, modified with cinchonidine, and at palladium black was investigated. The former had low activity under the conditions we tested. The main products during the hydrogenation of these compounds at palladium black are ethyl 4-R-2-hydroxy-4-oxobutyrates. The yield of the phenyl derivative amounts to 68.5%, while the yield of the corresponding 2-furyl derivative amounts to 97%. In the last case ethyl 2-hydroxy-4-oxo-4-(2-tetrahydrofuryl)butyrate was detected as impurity. The optimum conditions for the formation of ethyl 2-hydroxy-4-phenylbutyrate (yield 88.2%) were determined. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 655–659, May, 2006.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.