Polarisabilites moléculaires et effet diélectrique de milieu à l'état liquide. Étude théorique de la molécule d'eau et de ses diméres

The model of Onsager in which a polar molecule undergoes a reaction field due to the polarization of the molecular surroundings is used to evaluate by a S.C.F. calculation (CNDO/2 approximation) the modifications of a molecular structure in the liquid state.Application to water molecule and to three polar dimers for values of the dielectric constant varying between 3 and 78, shows that most of geometric parameters and dipoles moments vary of few per cent when the molecule is inserted in a liquid. In the liquid state dipole moments do not depend very much on the dielectric constant but energies and relative stabilities of isomers are strongly dependent on the medium.[/p]

     

Heat conduction, convection and radiolysis of the

The characterization by X-ray analysis of the trans,trans,trans-[bis(1-methylcytosinate,N4)bis(ammine)bis(hydroxo)platinum(IV)] octahydrate complex (I) reveals an unexpected crystal packing. The neutral complex molecule is hosted by layers, totally built up by water molecules which do not exhibit a direct coordination to metal ions. These corrugated layers are made by puckered eight- and planar four-membered rings of water molecules, held together by hydrogen bonds with an ordered proton arrangement.     

Water wafers: structure and melting of a hydrate inclusion compound of a neutral Pt(IV) complex with 1-methylcytosinato ligands

The characterization by X-ray analysis of the trans,trans,trans-[bis(1-methylcytosinate,N4)bis(ammine)bis(hydroxo)platinum(IV)] octahydrate complex (I) reveals an unexpected crystal packing. The neutral complex molecule is hosted by layers, totally built up by water molecules which do not exhibit a direct coordination to metal ions. These corrugated layers are made by puckered eight- and planar four-membered rings of water molecules, held together by hydrogen bonds with an ordered proton arrangement.     

两相催化体系中α，β－不饱和醛选择加氢反应研究Ⅲ．表面活性剂、溶剂对选择加氢反应的影响

研究了水溶性钌－膦配合物催化肉桂醛选择加氢反应中，相转移剂和表面活性剂对反应转化率和选择性的影响，考察了表面活性剂ＣＴＡＢ（十六烷基三甲溴化铵）浓度以及影响两相界面性质的因素—水相和有机相体积比、有机溶剂的改变等的影响．结果表明，相转移剂可以促进反应进行，其中以季铵盐相转移剂最好；表面活性剂能够显著地加快反应，其中以阳离子表面活性剂的效果最佳，且分子中含有长链烷基者（如ＣＴＡＢ）效果更好，非离子和阴离子表面活性剂的效果较差；对于ＣＴＡＢ，其浓度的增加导致反应速度的明显加快，但ＣＴＡＢ浓度达到１．６５×１０－２ｍｏｌ／Ｌ之后，反应体系乳化严重，反应完成后，两相分离变得困难．而增加水相体积和加入适当的有机溶剂，有利于转化率和选择性的提高．     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.     

Aggregation processes of biomolecules in presence of trehalose

Among disaccharides, trehalose, a naturally-occurring glass-forming disaccharide, is particularly effective in terms of its ability to preserve several organisms under stress conditions. The present work is aimed to investigate the bioprotective action of trehalose on lysozyme as a function of temperature. In order to extract quantitative information about the dimensional changes of the proteins, we performed Small Angle Neutron Scattering measurements on lysozyme/D₂O solutions in absence and in presence of the disaccharide. The findings emphasise the capability of trehalose to stabilise the protein, activating aggregation processes.     

Modeling the adsorption of U(VI) onto animal chitin using coupled mass transfer and surface complexation

This paper reports the development of a treatment system, using animal chitin as a passive biosorbent, for removing U(VI) from aqueous waste streams. An integral part of this system is a model that provides for the optimization of the treatment system through simulation of U(VI) removal efficiency based on the characteristics of the influent waste stream. The model accounts for changing solution matrix conditions through the coupling of surface complexation and mass transfer models. Complexation of U(VI) by chitin surface sites was modeled using FITEQL. Application of FITEQL in the “forward” mode provided the sorbed and aqueous phase concentrations needed for the mass transfer model. The mass transfer model was derived for both batch and continuously stirred tank reactor (CSTR) configurations using Fick's Law, reactor mass balances and rate law expressions. The coupled model was successfully validated using CSTR data at pH 6.5 and rate constants determined from batch sorption experiments. The CSTR configuration yields a steady-state, eighty percent U(VI) removal for 1 μM influent U(VI) with a solution-phase pH of 6.5 and 3.9 g l⁻¹ chitin.     

Gibbs functions for transfer of divalent metal cations from water to water + methanol mixtures using potentiometry, polarography and solubility measurements

Gibbs functions for transfer from water to methanol and to a full range of water + methanol mixtures were obtained for Cu²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ using potentiometric or polarographic measurements in these solvents. In addition, data were obtained from the solubility products of the alkaline-earth iodates. From values obtained by the different methods and literature data, a table of selected values is given.     

Determination of Ultratrace Amounts of Copper(Ⅱ) in Water Samples by Electrothermal Atomic Absorption Spectrometry After Cloud Point Extraction

A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry (ETAAS) after cloud point extraction (CPE). 1-( 2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0. 1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 0-2.0ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary