碳酸氢盐活化的过氧化氢：一种有机废水处理的新技术

水污染问题已成为影响我国可持续发展的关键问题之一,为有效提高现有污水处理的效率及其回收利用,各种催化氧化技术受到了广泛的关注。目前发展的各类高级氧化技术在实际的应用过程中明显受到了氧化剂的利用率、催化剂的浸出、寿命及成本等问题的严重限制。因此基于新的理念、发展新的催化氧化技术仍然受到广泛的关注。
　　最近几年,利用碳酸氢盐活化过氧化氢,应用于有机废水的降解逐渐受到环境催化领域的关注。碳酸氢盐本身是一种低毒性、广泛存在于环境及生物体系的化学物质,通过它活化过氧化氢产生过碳酸氢盐氧化剂,该氧化剂能够直接氧化有机物。同时,在各种过渡金属催化剂的存在下,通过该过碳酸氢盐可以形成氧化能力更强的各种自由基(如羟基自由基等) 及高价态的过渡金属离子参与有机废水的降解。虽然传统认为碳酸盐及碳酸氢盐对高级氧化法降解有机废水不利,原因是认为它们能捕捉羟基自由基,形成氧化能力更低的碳酸根自由基。现有的研究已充分表明,较低浓度的碳酸氢盐能够加快有机废水的氧化降解,而且通常比单独使用过氧化氢效率更高,这些新的发现已明显突破了传统意义上对碳酸氢盐作用的理解。更为重要的是,在微量碳酸氢盐的存在下,其产生的微碱性环境极大地消除了负载型氧化物催化剂在废水降解过程中的金属离子流失、从而极大地延长了催化剂的寿命。该缺点是各种基于过渡金属氧化物催化剂的高级氧化技术难以广泛推广的关键性挑战,原因是随着氧化降解的进行,废水体系由于有机酸的生成而逐渐酸化,进而引发氧化物催化剂的酸溶而流失。在这点上,碳酸氢盐活化过氧化氢系统由于其天然的微碱性环境体现出了其明显的优势。
　　本文即是在本课题组工作基础上,对该领域内国内外研究进展加以总结,以期获得国内外同行的进一步关注。综述的主要内容包括：(1)碳酸氢氧活化过氧化氢的相关知识介绍,(2)均相碳酸氢氧活化过氧化氢降解有机废水的研究进展,(3)基于金属氧化物催化剂的碳酸氢氧活化过氧化氢降解有机废水的研究进展,和(4)碳酸氢盐在其他高级氧化技术中的应用。虽然基于碳酸氢氧活化过氧化氢降解有机废水的研究还处于早期探索阶段,还有很多基础科学问题如降解机理等值得进一步探索,期望通过该综述的介绍能够让同行对碳酸氢氧活化过氧化氢降解有机废水有一个比较全面的了解,进而推动该研究方向的发展,为有机废水的催化处理提供新的机会。     

Sampling and analysis of volatile organics emitted from wastewater treatment plant and drain system of an industrial science park

Volatile organic compounds (VOCs) were monitored in the different sections of a wastewater treatment plant (WWTP), the outlet of both the WWTP and rainfall water, and the downstream of the WWTP joining the river in the area or vicinity of an industrial science park located in Hsinchu, Taiwan. Levels of VOCs were determined by collecting air samples over several sampling points and analyzed using gas chromatography. Among VOCs identified in the drainage and effluent system in each season, acetone, isopropanol (IPA) and dimethyl sulfide (DMS) were the major emission species and maximum concentrations were 400.4, 22.8 and 641.2 ppbv, respectively. The ambient air and wastewater sample analysis from neighboring wastewater streams identified pollutants being discharged from unaccounted sources other than the industrial park. According to the 24 h semi-continuous monitoring data (27/7/2002-29/7/2002), the total VOC concentration was an average of 93 ppbv (acetone contributed ∼78%) with a dramatic variation during the day and night. The emission rate of measured VOCs estimated using fixed box model projected an average of 2-4 μg m⁻² h⁻¹) during the day and 9-17 μg m⁻² h⁻¹ during the night. In addition, the isopleth maps show that the acetone and DMS emissions influence adversely the nearby residential area located at less than 100 m downwind from the plant. Eventually, based on this study, an on-line monitoring and alerting system could be built for a long-term performance, and with regular information on the varying pollutants over time construction of a green strategy and creation of a sustainable environment can be achieved.     

从电化学和微生物学角度分析微生物燃料电池处理硫污染物的机理

微生物燃料电池(Microbial fuel cells,MFCs)是一种有前景的去除废水中硫污染物的技术。本文在生物膜电极反应机理的基础上,讨论电极反应和微生物在MFCs处理硫污染物过程中的作用,论证了其处理机制和影响因素,总结了反应器构型、分离器类型、电极材料和催化剂,以及硫的回收和电极再生。此外,通过核算对比MFCs和典型的厌氧生物技术处理含硫废水的成本和收益对MFCs去除废水中硫污染物的可行性进行了评估。     

Toxicity assays applied to wastewater treatment

The utility and validity of toxicity tests for monitoring of wastewater treatment have been assessed. The evaluated acute toxicity tests have been Vibrio fischeri, Selenastrum capricornotum and Daphnia magna tests. The validation studies indicated that the acute toxicity tests can be considered as high sensitivity analytical tools to detect common environmental concentrations of the pollutants at concentration levels as low as ng l⁻¹. The toxicity tests showed to have discriminatory ability to distinguish between different degrees of toxicity, and the toxic specificity of the compounds on target organisms. Synergistic, additive or antagonistic effects were evaluated indicating the capacity of the toxicity test to assess the combined effects of chemicals in wastewaters. The reproducibility of these tests, calculated as relative standard deviation, is acceptable in the range of 5-22.3%. The application of multivariate date analysis proved that toxicity and chemical measures are complementary analytical tools for monitoring of wastewaters quality. The toxicity tests are useful analytical tools for screening of chemical analysis and as an early warning system to monitor the treatment of WWTPs. The use of single toxicity test or battery of tests is the best approach to evaluate the risk because they are reliable indices of the toxic impact of effluents in the aquatic environment. The toxicity tests were applied in the quality control of different European WWTPs.     

State-of-the-art of membrane bioreactors: Worldwide research and commercial applications in North America

Membrane bioreactor (MBR) technology is advancing rapidly around the world both in research and commercial applications. Despite the increasing number of studies and full-scale applications of MBR systems, directions and trends in academic research as well as commercial developments require further analysis. This paper aims to critically characterize and review worldwide academic research efforts in the area of MBRs as well as focus attention to commercial MBR applications in North America. A total of 339 research papers published in peer-reviewed international journals from 1991 to 2004 and a total of 258 full-scale MBR installations in North America were used as the database for the analysis provided in this paper. After a surge of MBR publications in 2002, research appears to have reached a plateau in the last 3 years using both submerged and external MBR units. Although much of the pioneering research occurred in Japan, France and the UK, countries such as South Korea, China and Germany have significantly contributed to the research pool in the last 5 years. The primary research focus has been on water filtration MBRs with limited growth in extractive and gas diffusion MBRs which still hold un-tapped potential. Fundamental aspects studied in academic research predominantly involve issues related to fouling, microbial characterization and optimizing operational performance. Research in North America presents a unique picture as a higher ratio of industrial wastewater treatment and side-stream MBR applications have been studied compared to other parts of the world. For MBR commercial application, the North America installations constitute about 11% of worldwide installations. Zenon occupies the majority of the MBR market in North America, whereas Kubota and Mitsubishi-Rayon have a larger number of installations in other parts of the world. Due to more stringent regulations and water reuse strategies, it is expected that a significant increase in MBR plant capacity and widening of application areas will occur in the future. Potential application areas include nitrate removal in drinking water treatment, removal of endocrine disrupting compounds from water and wastewater streams, enhancing bio-fuels production via membrane assisted fermentation and gas extraction and purification MBRs.     

Photocatalytic decolorization of methyl orange solution with potassium peroxydisulfate

Increasing environmental pollution caused by toxic dyes due to their hazardous nature is a matter of great concern. It has been generally agreed that methyl orange (MO) can be effectively degraded in aerated K₂S₂O₈ homogeneous reaction system using near-UV irradiation. In this paper photocatalytic degradation of MO solutions with K₂S₂O₈ was investigated, with particular attention on the possible underlying mechanisms. This report has shown decolorization efficiency of MO increases with the increasing of the dosage of the catalyst. There is no optimal amount of catalyst in our case, where special attention was paid on the nature of the photocatalyst itself. The current research revealed that the decolorization reaction is a pseudo first-order reaction when the concentration of MO is below 20 mg L⁻¹ and the decolorization reaction is zero-order reaction when the concentration of MO is above 100 mg L⁻¹, but the Langmuir-Hinshewood kinetic model does not describe this. The influence of IO₄⁻, BrO₃⁻ and H₂O₂ were investigated in detailed. Several observations indicate that the mechanism is not involved in hydroxyl radical attacks in MO degradation with K₂S₂O₈ by UV irradiation. The possible underlying mechanisms are direct oxidation of the MO by S₂O₈²⁻ and hydrogen attraction by SO₄^•−.      

超声在废水处理中的应用

超声波处理废水是一项新兴的废水处理技术,具有操作简单方便、降解速度快等优点,在处理毒性高、难降解的有机废水应用表现出广阔的前景。     

Application of hybrid oxidative processes based on cavitation for the treatment of commercial dye industry effluents

The present work demonstrates the significant role of ultrasound (US) in intensifying the efficacy of the combination with Fenton reagent and/or ozone for the treatment of real dye industry industrial effluent procured from the local industry. Initial part of the work focused on analysing the literature based on combination approaches of US with different oxidants applied for the treatment of real and simulated effluents focusing on the dyes. The work also provides guidelines for the selection of optimal operating parameters for maximizing the intensification of the degradation. The second part of the work presents an experimental study into combined approaches of ultrasound with ozone (O₃) and Fenton’s reagent for treatment of real effluent. Under optimized conditions (100 W, 20 kHz and duty cycle of 70%), maximum COD reductions of 94.79% and 51% were observed using a combined approach of US + Fenton oxidation followed by lime treatment for the treatment of effluent-I and effluent-II respectively at H₂O₂ loading of 17.5 g/L, H₂O₂/Fe²⁺ ratio of 3, pH of 4, CaO dose of 1 g/L and an overall treatment time of 70 min. US + Fenton + O₃ followed by lime was also applied for treatment under ozone loading of 1 g/h for the treatment of effluent-I and it was found that maximum COD reduction of 95.12% was obtained within 30 min of treatment time, indicating use of ozone did not result in significant value addition in terms of COD reduction but resulted in faster treatment. HC (inlet pressure: 4 bar) + Fenton + Lime scheme was successfully replicated on a pilot-scale resulting in maximum COD reduction of 57.65% within 70 min of treatment time. Overall, it has been concluded that the hybrid oxidative processes as US + Fenton followed by lime treatment is established as the best approach ensuring effective COD reduction at the same time obtaining final colourless/reusable effluent.     

Monitoring and classification of wastewater quality using supervised pattern recognition techniques and deterministic resolution of molecular absorption spectra based on multiwavelength UV spectra deconvolution

A field flow approach for the in situ monitoring of wastewater quality is developed and assessed in this work, based on a combination of methods employing deconvolution of molecular absorption spectra and in situ/on-line analysis of wastewater effluent of various origin. The approach involves in situ immersion probes to monitor basic physicochemical parameters followed by UV spectrum deconvolution in order to provide a rapid estimate of organic matter, suspended solids and nitrate and on-line analysis of phosphates in a fully automated setup. The collected data are then treated with a series of supervised pattern recognition techniques in order to classify wastewater effluent according to their origin in three major categories namely municipal, industrial and hospital. The results suggest that the method affords a good approximation of realistic concentrations, as determined by reference methods, while it affords a good classification among various wastewater effluents of different origin. In that manner, the method enables a rapid inference of treated wastewater quality and a robust assessment of treatment process state, especially with regards to violations of effluent quality parameters.     

Metal content variation in wastewater and biosludge from Bangkok's central wastewater treatment plants

The objectives of this study were to determine the metal contents and their variations in influent, effluent and biosludge, and to evaluate the potential environmental impact of biosludge generated from the Bangkok, Thailand central wastewater treatment plants. The variation in influent metal content was site-specific and could be related to the economic activities of small-scale companies. An activated sludge process could remove some level of the metal content via a combination of biological and physicochemical processes. The variation in metal removal efficiencies strongly depended upon the influent wastewater characteristics and composition. Metal occurrence in biosludge was similar to the metals found in the influent. Iron was the most abundant while Cd had the lowest occurrence. A longer excess sludge operational condition and storage time may increase metal contents in biosludge due to the decomposition of biodegradable organic matter by microorganisms. According to the speciation results, the biosludge studied had a low mobility and availability index, except the RK plant biosludge. Most trace metals of interest were in the less mobile and bioavailable forms. The most mobile exchangeable and moderately mobile carbonate fractions of Cd, Mn, Ni and Zn were relatively low (5–30%). Biosludge from RK had a total Cu concentration higher than the limits, and to some extent exchangeable and carbonate fractions that were relatively high (∼ 40%).